[Fri Sep 30 07:28:01 2011] Detection parameters:
  Position = (264.5, 621.5) = 3 19 57.71 41 30 14.8
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 32.8 +/- 20.2
  Background counts = 373.2
  Rate = 0.0004 +/- 0.0003

[Fri Sep 30 07:28:20 2011] Off-axis axis estimate = 6.04'
[Fri Sep 30 07:40:02 2011] Using EEF radius (= 1.65 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 07:40:02 2011] Initial guess for spatial extent in simple fitting = 1.65"
[Fri Sep 30 07:40:02 2011] source mask rpix=3.4, npix_max = 59, mask sum = 43, frac = 0.725
[Fri Sep 30 07:40:02 2011] Giving source the simple spatial ID 93 for pass 0, mean size = 1.65"
[Fri Sep 30 07:40:10 2011] fullrun_ccd1_acisf11715_pi14-548_cl_pass0_src93.ximg exists
[Fri Sep 30 07:40:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11715_pi14-548_cl_pass0_src93.csv
[Fri Sep 30 07:40:10 2011] fullrun_ccd1_acisf11715_pi14-548_cl_pass0_src93_1.ximg exists
[Fri Sep 30 07:40:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11715_pi14-548_cl_pass0_src93.csv
[Fri Sep 30 07:40:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11715_pi14-548_cl_pass0_src93_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11715_pi14-548_cl_pass0_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 07:40:17 2011] fullrun_ccd1_acisf11715_pi14-548_cl_pass0_tfrozen_src93.ximg exists
[Fri Sep 30 07:40:17 2011] fullrun_ccd1_acisf11715_pi14-548_cl_pass0_tfrozen_src93_1.ximg exists
[Fri Sep 30 07:40:17 2011] Fit fullrun_ccd1_acisf11715_pi14-548_cl_pass0_tfrozen_src93 appears to have run properly
[Fri Sep 30 07:40:57 2011] Spatial fit model total counts = 1859.420000, observed total counts = 1869.000000
[Fri Sep 30 07:40:57 2011] Offset between fit and detection position for source 70 = 8.534930 pixels
[Fri Sep 30 07:40:57 2011] 1864.460000 total counts/ 1427.110000 bgd. counts: snr = 11.577117
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 8.534930 pixels
  Position = (270.0, 615.0) = 3 19 57.49 41 30 11.4
  Extent = 3.3 (3.3-6.6)", rotation angle = 0
  Source counts = 437.4 +/- 43.2
  Background counts = 1427.1
  Rate = 0.006 +/- 0.0006
[Fri Sep 30 07:40:57 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 07:40:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 07:40:57 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 07:40:57 2011] Source does appear to be extended
[Fri Sep 30 07:40:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 07:41:36 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 07:41:36 2011] Initial guess for spatial extent in simple fitting = 3.30"
[Fri Sep 30 07:41:36 2011] source mask rpix=6.7, npix_max = 207, mask sum = 179, frac = 0.862
[Fri Sep 30 07:41:36 2011] Giving source the simple spatial ID 41 for pass 1, mean size = 3.30"
[Fri Sep 30 07:41:40 2011] fullrun_ccd1_acisf11715_pi14-548_cl_pass1_src41.ximg exists
[Fri Sep 30 07:41:40 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf11715_pi14-548_cl_pass1_src41.csv
[Fri Sep 30 07:41:40 2011] fullrun_ccd1_acisf11715_pi14-548_cl_pass1_src41_1.ximg exists
[Fri Sep 30 07:41:40 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf11715_pi14-548_cl_pass1_src41.csv
[Fri Sep 30 07:41:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11715_pi14-548_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11715_pi14-548_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 07:41:41 2011] fullrun_ccd1_acisf11715_pi14-548_cl_pass1_tfrozen_src41.ximg exists
[Fri Sep 30 07:41:41 2011] fullrun_ccd1_acisf11715_pi14-548_cl_pass1_tfrozen_src41_1.ximg exists
[Fri Sep 30 07:41:41 2011] Fit fullrun_ccd1_acisf11715_pi14-548_cl_pass1_tfrozen_src41 appears to have run properly
[Fri Sep 30 07:41:54 2011] Warning, spatial fit 41 centroid is now closest to src. 73
[Fri Sep 30 07:41:54 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 07:41:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 07:41:54 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 07:41:54 2011] Source does appear to be extended
[Fri Sep 30 07:41:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 07:41:54 2011] Source is confused with source 73
[Fri Sep 30 07:43:06 2011] Not overwriting source region fullrun_ccd1_acisf11715_pi14-548_pass1_cl_src70_src.reg
[Fri Sep 30 07:43:06 2011] Extracting stamp from image fullrun_ccd1_acisf11715_pi14-548_cl_sm2.00.img.gz, (119, 464) - (421, 766)
[Fri Sep 30 07:43:06 2011] Writing fullrun_ccd1_acisf11715_pi14-548_pass1_cl_src70.gif
[Fri Sep 30 07:45:26 2011] ../../acisf11715/products/events/fullrun_ccd1_acisf11715_pi14-548_pass1_cl_src70_src.evt and ../../acisf11715/products/events/fullrun_ccd1_acisf11715_pi14-548_pass1_cl_src70_bgd.evt exist, delete to re-create
[Fri Sep 30 07:45:26 2011] Size of ../../acisf11715/products/events/fullrun_ccd1_acisf11715_pi14-548_pass1_cl_src70_src.evt.gz[events] = 10601 counts
[Fri Sep 30 07:45:26 2011] Mean chipx,y = (77.55, 309.86)
[Fri Sep 30 07:45:26 2011] Mean tdetx,y = (4822.14, 4184.55)
[Fri Sep 30 07:45:26 2011] chipx,y range = (33.00-119.00, 266.00-353.00)
[Fri Sep 30 07:45:27 2011] Size of ../../acisf11715/products/events/fullrun_ccd1_acisf11715_pi14-548_pass1_cl_src70_bgd.evt.gz[events] = 124061 counts
[Fri Sep 30 07:45:27 2011] ../../acisf11715/products/images/fullrun_ccd1_acisf11715_pi14-548_pass1_cl_src70_src.img and ../../acisf11715/products/images/fullrun_ccd1_acisf11715_pi14-548_pass1_cl_src70_bgd.img exist, delete to re-create
[Fri Sep 30 07:45:27 2011] ../../acisf11715/products/spectra/fullrun_ccd1_acisf11715_pi14-548_pass1_cl_src70_src.pi and ../../acisf11715/products/spectra/fullrun_ccd1_acisf11715_pi14-548_pass1_cl_src70_bgd.pi exist, delete to re-create
[Fri Sep 30 07:45:31 2011] ../../acisf11715/products/lightcurves/fullrun_ccd1_acisf11715_pi14-548_pass1_cl_src70_src.lc and ../../acisf11715/products/lightcurves/fullrun_ccd1_acisf11715_pi14-548_pass1_cl_src70_bgd.lc exist, delete to re-create
[Fri Sep 30 07:46:00 2011] Keeping rmf generated by specextract
[Fri Sep 30 07:46:00 2011] 181.032
[Fri Sep 30 07:47:39 2011] Updating aperture counts using extracted products
[Fri Sep 30 07:47:39 2011] Error reading totcts from fullrun_ccd1_acisf11715_pi14-548_pass1_cl_src70_src.pi.gz
[Fri Sep 30 07:47:40 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 07:47:40 2011] Using photon index=1.80, rate=0.00596, arf fullrun_ccd1_acisf11715_pi14-548_pass1_cl_src70.arf
[Fri Sep 30 07:47:40 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 07:47:40 2011] Updating source flux to 7.4e-14
[Fri Sep 30 07:47:51 2011] Flag c found in src. 70 procflags, skipping spectral fitting