[Mon Oct 10 07:25:48 2011] Detection parameters:
  Position = (1151.1, 656.3) = 3 19 51.48 41 34 24.9
  Extent = 0.7" x 0.6", rotation angle = 41 degrees
  Source counts = 270.2 +/- 26.4
  Background counts = 426.8
  Rate = 0.003 +/- 0.0003

[Mon Oct 10 07:26:12 2011] Off-axis axis estimate = 1.96'
[Mon Oct 10 07:42:17 2011] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 07:42:17 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Mon Oct 10 07:42:17 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.803
[Mon Oct 10 07:42:17 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.43"
[Mon Oct 10 07:42:18 2011] fullrun_ccd3_acisf11714_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 10 07:42:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11714_pi14-548_cl_pass0_src1.csv
[Mon Oct 10 07:42:18 2011] fullrun_ccd3_acisf11714_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 10 07:42:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11714_pi14-548_cl_pass0_src1.csv
[Mon Oct 10 07:42:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11714_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11714_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 07:42:19 2011] fullrun_ccd3_acisf11714_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 10 07:42:19 2011] fullrun_ccd3_acisf11714_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 10 07:42:19 2011] Fit fullrun_ccd3_acisf11714_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 10 07:42:52 2011] Spatial fit model total counts = 786.645000, observed total counts = 782.000000
[Mon Oct 10 07:42:52 2011] Offset between fit and detection position for source 1 = 0.338329 pixels
[Mon Oct 10 07:42:52 2011] 786.657000 total counts/ 639.677000 bgd. counts: snr = 5.811361
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.338329 pixels
  Position = (1150.7, 656.4) = 3 19 51.52 41 34 24.7
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 147.0 +/- 28.0
  Background counts = 639.7
  Rate = 0.002 +/- 0.0003
[Mon Oct 10 07:42:52 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 07:42:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 07:42:52 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 07:42:52 2011] Source does appear to be extended
[Mon Oct 10 07:42:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 07:43:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 10 07:43:18 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 10 07:43:18 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Mon Oct 10 07:43:18 2011] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.060
[Mon Oct 10 07:43:18 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.71"
[Mon Oct 10 07:43:19 2011] fullrun_ccd3_acisf11714_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 10 07:43:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11714_pi14-548_cl_pass1_src1.csv
[Mon Oct 10 07:43:19 2011] fullrun_ccd3_acisf11714_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 10 07:43:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11714_pi14-548_cl_pass1_src1.csv
[Mon Oct 10 07:43:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11714_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11714_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 07:43:20 2011] fullrun_ccd3_acisf11714_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 10 07:43:20 2011] fullrun_ccd3_acisf11714_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 10 07:43:20 2011] Fit fullrun_ccd3_acisf11714_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 10 07:43:36 2011] Spatial fit model total counts = 764.066000, observed total counts = 764.000000
[Mon Oct 10 07:43:36 2011] Offset between fit and detection position for source 1 = 0.031996 pixels
[Mon Oct 10 07:43:36 2011] 764.821000 total counts/ 614.119000 bgd. counts: snr = 6.081248
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.031996 pixels
  Position = (1150.7, 656.4) = 3 19 51.52 41 34 24.7
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 150.7 +/- 27.7
  Background counts = 614.1
  Rate = 0.002 +/- 0.0003
[Mon Oct 10 07:43:36 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 07:43:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 07:43:36 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 07:43:36 2011] Source does appear to be extended
[Mon Oct 10 07:43:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 07:47:38 2011] Not overwriting source region fullrun_ccd3_acisf11714_pi14-548_pass1_cl_src1_src.reg
[Mon Oct 10 07:47:38 2011] Extracting stamp from image fullrun_ccd3_acisf11714_pi14-548_cl_sm2.00.img.gz, (1117, 623) - (1184, 690)
[Mon Oct 10 07:47:38 2011] Writing fullrun_ccd3_acisf11714_pi14-548_pass1_cl_src1.gif
[Mon Oct 10 07:47:39 2011] ../../acisf11714/products/events/fullrun_ccd3_acisf11714_pi14-548_pass1_cl_src1_src.evt and ../../acisf11714/products/events/fullrun_ccd3_acisf11714_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Oct 10 07:47:39 2011] Size of ../../acisf11714/products/events/fullrun_ccd3_acisf11714_pi14-548_pass1_cl_src1_src.evt.gz[events] = 437 counts
[Mon Oct 10 07:47:39 2011] Mean chipx,y = (825.78, 818.27)
[Mon Oct 10 07:47:39 2011] Mean tdetx,y = (4313.73, 3886.78)
[Mon Oct 10 07:47:39 2011] chipx,y range = (804.00-849.00, 797.00-839.00)
[Mon Oct 10 07:47:39 2011] Size of ../../acisf11714/products/events/fullrun_ccd3_acisf11714_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 2671 counts
[Mon Oct 10 07:47:39 2011] ../../acisf11714/products/images/fullrun_ccd3_acisf11714_pi14-548_pass1_cl_src1_src.img and ../../acisf11714/products/images/fullrun_ccd3_acisf11714_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Oct 10 07:47:39 2011] ../../acisf11714/products/spectra/fullrun_ccd3_acisf11714_pi14-548_pass1_cl_src1_src.pi and ../../acisf11714/products/spectra/fullrun_ccd3_acisf11714_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Oct 10 07:47:42 2011] ../../acisf11714/products/lightcurves/fullrun_ccd3_acisf11714_pi14-548_pass1_cl_src1_src.lc and ../../acisf11714/products/lightcurves/fullrun_ccd3_acisf11714_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Oct 10 07:48:36 2011] Keeping rmf generated by specextract
[Mon Oct 10 07:48:36 2011] 200.178
[Mon Oct 10 07:48:45 2011] Updating aperture counts using extracted products
[Mon Oct 10 07:48:45 2011] Error reading totcts from fullrun_ccd3_acisf11714_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Oct 10 07:48:46 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 07:48:46 2011] Using photon index=1.80, rate=0.00164, arf fullrun_ccd3_acisf11714_pi14-548_pass1_cl_src1.arf
[Mon Oct 10 07:48:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 07:48:46 2011] Updating source flux to 1.8e-14
[Mon Oct 10 07:55:04 2011] Reading fit data from acisf11714/analysis//spectral/fullrun_ccd3_acisf11714_pi14-548_pass1_cl_src1_pl.csv
[Mon Oct 10 07:55:04 2011] Spectral fit parameter nH value = 2.49486e+13
[Mon Oct 10 07:55:04 2011] Spectral fit parameter PhoIndex value = 2.21339
[Mon Oct 10 07:55:04 2011] Failed to get F(0.3-8.0) from acisf11714/analysis//spectral/fullrun_ccd3_acisf11714_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Oct 10 07:55:04 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 07:55:04 2011] Using Nh = 2.5e+13, photon index=2.21, rate=0.00164, arf fullrun_ccd3_acisf11714_pi14-548_pass1_cl_src1.arf
[Mon Oct 10 07:55:04 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 07:55:05 2011] Updating source flux to 2e-14