[Mon Oct 10 07:25:32 2011] Detection parameters:
  Position = (505.4, 889.4) = 3 19 54.04 41 29 24.3
  Extent = 0.5" x 0.5", rotation angle = 138 degrees
  Source counts = 34.3 +/- 14.2
  Background counts = 167.7
  Rate = 0.0004 +/- 0.0002

[Mon Oct 10 07:25:47 2011] Off-axis axis estimate = 4.83'
[Mon Oct 10 07:42:01 2011] Using EEF radius (= 1.11 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 07:42:01 2011] Initial guess for spatial extent in simple fitting = 1.11"
[Mon Oct 10 07:42:01 2011] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.818
[Mon Oct 10 07:42:01 2011] Giving source the simple spatial ID 87 for pass 0, mean size = 1.11"
[Mon Oct 10 07:42:04 2011] fullrun_ccd2_acisf11714_pi14-548_cl_pass0_src87.ximg exists
[Mon Oct 10 07:42:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11714_pi14-548_cl_pass0_src87.csv
[Mon Oct 10 07:42:05 2011] fullrun_ccd2_acisf11714_pi14-548_cl_pass0_src87_1.ximg exists
[Mon Oct 10 07:42:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11714_pi14-548_cl_pass0_src87.csv
[Mon Oct 10 07:42:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11714_pi14-548_cl_pass0_src87_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11714_pi14-548_cl_pass0_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 07:42:17 2011] fullrun_ccd2_acisf11714_pi14-548_cl_pass0_tfrozen_src87.ximg exists
[Mon Oct 10 07:42:17 2011] fullrun_ccd2_acisf11714_pi14-548_cl_pass0_tfrozen_src87_1.ximg exists
[Mon Oct 10 07:42:17 2011] Fit fullrun_ccd2_acisf11714_pi14-548_cl_pass0_tfrozen_src87 appears to have run properly
[Mon Oct 10 07:42:47 2011] Spatial fit model total counts = 1779.710000, observed total counts = 1780.000000
[Mon Oct 10 07:42:47 2011] Offset between fit and detection position for source 494 = 2.586496 pixels
[Mon Oct 10 07:42:47 2011] 1775.250000 total counts/ 1564.050000 bgd. counts: snr = 5.340336
Spatial fit parameters:
  Offset between fit and detection position for source 494 = 2.586496 pixels
  Position = (507.9, 890.1) = 3 19 53.95 41 29 24.4
  Extent = 2.1 (1.8-2.2)", rotation angle = 0
  Source counts = 211.2 +/- 42.1
  Background counts = 1564.0
  Rate = 0.002 +/- 0.0005
[Mon Oct 10 07:42:47 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 07:42:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 07:42:47 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 07:42:47 2011] Source does appear to be extended
[Mon Oct 10 07:42:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 07:43:16 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 10 07:43:16 2011] Initial guess for spatial extent in simple fitting = 2.08"
[Mon Oct 10 07:43:16 2011] source mask rpix=4.2, npix_max = 89, mask sum = 100, frac = 1.120
[Mon Oct 10 07:43:16 2011] Giving source the simple spatial ID 36 for pass 1, mean size = 2.08"
[Mon Oct 10 07:43:17 2011] fullrun_ccd2_acisf11714_pi14-548_cl_pass1_src36.ximg exists
[Mon Oct 10 07:43:18 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf11714_pi14-548_cl_pass1_src36.csv
[Mon Oct 10 07:43:18 2011] fullrun_ccd2_acisf11714_pi14-548_cl_pass1_src36_1.ximg exists
[Mon Oct 10 07:43:18 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf11714_pi14-548_cl_pass1_src36.csv
[Mon Oct 10 07:43:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11714_pi14-548_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11714_pi14-548_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 07:43:18 2011] fullrun_ccd2_acisf11714_pi14-548_cl_pass1_tfrozen_src36.ximg exists
[Mon Oct 10 07:43:18 2011] fullrun_ccd2_acisf11714_pi14-548_cl_pass1_tfrozen_src36_1.ximg exists
[Mon Oct 10 07:43:18 2011] Fit fullrun_ccd2_acisf11714_pi14-548_cl_pass1_tfrozen_src36 appears to have run properly
[Mon Oct 10 07:43:34 2011] Warning, spatial fit 36 centroid is now closest to src. 27
[Mon Oct 10 07:43:34 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 07:43:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 07:43:34 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 07:43:34 2011] Source does appear to be extended
[Mon Oct 10 07:43:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 07:45:37 2011] Not overwriting source region fullrun_ccd2_acisf11714_pi14-548_pass1_cl_src494_src.reg
[Mon Oct 10 07:45:37 2011] Extracting stamp from image fullrun_ccd2_acisf11714_pi14-548_cl_sm2.00.img.gz, (413, 795) - (603, 985)
[Mon Oct 10 07:45:37 2011] Writing fullrun_ccd2_acisf11714_pi14-548_pass1_cl_src494.gif
[Mon Oct 10 07:47:16 2011] ../../acisf11714/products/events/fullrun_ccd2_acisf11714_pi14-548_pass1_cl_src494_src.evt and ../../acisf11714/products/events/fullrun_ccd2_acisf11714_pi14-548_pass1_cl_src494_bgd.evt exist, delete to re-create
[Mon Oct 10 07:47:18 2011] Size of ../../acisf11714/products/events/fullrun_ccd2_acisf11714_pi14-548_pass1_cl_src494_src.evt.gz[events] = 5785 counts
[Mon Oct 10 07:47:18 2011] Mean chipx,y = (596.27, 783.05)
[Mon Oct 10 07:47:18 2011] Mean tdetx,y = (3844.05, 3489.73)
[Mon Oct 10 07:47:18 2011] chipx,y range = (562.00-629.00, 748.00-816.00)
[Mon Oct 10 07:47:19 2011] Size of ../../acisf11714/products/events/fullrun_ccd2_acisf11714_pi14-548_pass1_cl_src494_bgd.evt.gz[events] = 60975 counts
[Mon Oct 10 07:47:19 2011] ../../acisf11714/products/images/fullrun_ccd2_acisf11714_pi14-548_pass1_cl_src494_src.img and ../../acisf11714/products/images/fullrun_ccd2_acisf11714_pi14-548_pass1_cl_src494_bgd.img exist, delete to re-create
[Mon Oct 10 07:47:19 2011] ../../acisf11714/products/spectra/fullrun_ccd2_acisf11714_pi14-548_pass1_cl_src494_src.pi and ../../acisf11714/products/spectra/fullrun_ccd2_acisf11714_pi14-548_pass1_cl_src494_bgd.pi exist, delete to re-create
[Mon Oct 10 07:47:24 2011] ../../acisf11714/products/lightcurves/fullrun_ccd2_acisf11714_pi14-548_pass1_cl_src494_src.lc and ../../acisf11714/products/lightcurves/fullrun_ccd2_acisf11714_pi14-548_pass1_cl_src494_bgd.lc exist, delete to re-create
[Mon Oct 10 07:47:38 2011] Keeping rmf generated by specextract
[Mon Oct 10 07:47:38 2011] 180.776
[Mon Oct 10 07:48:44 2011] Updating aperture counts using extracted products
[Mon Oct 10 07:48:44 2011] Error reading totcts from fullrun_ccd2_acisf11714_pi14-548_pass1_cl_src494_src.pi.gz
[Mon Oct 10 07:48:45 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 07:48:45 2011] Using photon index=1.80, rate=0.0023, arf fullrun_ccd2_acisf11714_pi14-548_pass1_cl_src494.arf
[Mon Oct 10 07:48:45 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 07:48:45 2011] Updating source flux to 2.8e-14