[Mon Oct 10 07:24:24 2011] Detection parameters:
  Position = (617.1, 588.2) = 3 19 37.49 41 38 44.1
  Extent = 0.6" x 0.5", rotation angle = 48 degrees
  Source counts = 429.8 +/- 23.0
  Background counts = 100.2
  Rate = 0.005 +/- 0.0003

[Mon Oct 10 07:24:29 2011] Off-axis axis estimate = 5.14'
[Mon Oct 10 07:41:59 2011] Using EEF radius (= 1.24 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 07:41:59 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 10 07:41:59 2011] Initial guess for spatial extent in simple fitting = 1.24"
[Mon Oct 10 07:41:59 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.990
[Mon Oct 10 07:41:59 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.24"
[Mon Oct 10 07:42:00 2011] fullrun_ccd1_acisf11714_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 10 07:42:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11714_pi14-548_cl_pass0_src1.csv
[Mon Oct 10 07:42:00 2011] fullrun_ccd1_acisf11714_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 10 07:42:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11714_pi14-548_cl_pass0_src1.csv
[Mon Oct 10 07:42:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11714_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11714_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 07:42:00 2011] fullrun_ccd1_acisf11714_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 10 07:42:00 2011] fullrun_ccd1_acisf11714_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 10 07:42:00 2011] Fit fullrun_ccd1_acisf11714_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 10 07:42:33 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.582730 pixels away
[Mon Oct 10 07:42:33 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 07:42:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 07:42:33 2011] Assessing source extent using major
[Mon Oct 10 07:42:33 2011] Source does appear to be extended
[Mon Oct 10 07:42:33 2011] Computing asymmetry using major and minor axis, asym = 1.24
[Mon Oct 10 07:43:14 2011] Using EEF radius (= 1.24 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 07:43:14 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 10 07:43:14 2011] Initial guess for spatial extent in simple fitting = 1.24"
[Mon Oct 10 07:43:14 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.990
[Mon Oct 10 07:43:14 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.24"
[Mon Oct 10 07:43:15 2011] fullrun_ccd1_acisf11714_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 10 07:43:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11714_pi14-548_cl_pass1_src1.csv
[Mon Oct 10 07:43:15 2011] fullrun_ccd1_acisf11714_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 10 07:43:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11714_pi14-548_cl_pass1_src1.csv
[Mon Oct 10 07:43:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11714_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11714_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 07:43:15 2011] fullrun_ccd1_acisf11714_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 10 07:43:15 2011] fullrun_ccd1_acisf11714_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 10 07:43:15 2011] Fit fullrun_ccd1_acisf11714_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 10 07:43:29 2011] Spatial fit model total counts = 573.001000, observed total counts = 573.000000
[Mon Oct 10 07:43:29 2011] Offset between fit and detection position for source 1 = 0.555735 pixels
[Mon Oct 10 07:43:29 2011] 579.027000 total counts/ 215.082000 bgd. counts: snr = 24.816111
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.555735 pixels
  Position = (617.5, 588.5) = 3 19 37.49 41 38 44.1
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 363.9 +/- 24.1
  Background counts = 215.1
  Rate = 0.004 +/- 0.0003
[Mon Oct 10 07:43:29 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 07:43:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 07:43:29 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 07:43:29 2011] Source does appear to be extended
[Mon Oct 10 07:43:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 07:44:43 2011] Not overwriting source region fullrun_ccd1_acisf11714_pi14-548_pass1_cl_src1_src.reg
[Mon Oct 10 07:44:43 2011] Extracting stamp from image fullrun_ccd1_acisf11714_pi14-548_cl_sm2.00.img.gz, (581, 552) - (654, 625)
[Mon Oct 10 07:44:43 2011] Writing fullrun_ccd1_acisf11714_pi14-548_pass1_cl_src1.gif
[Mon Oct 10 07:44:44 2011] ../../acisf11714/products/events/fullrun_ccd1_acisf11714_pi14-548_pass1_cl_src1_src.evt and ../../acisf11714/products/events/fullrun_ccd1_acisf11714_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Oct 10 07:44:44 2011] Size of ../../acisf11714/products/events/fullrun_ccd1_acisf11714_pi14-548_pass1_cl_src1_src.evt.gz[events] = 449 counts
[Mon Oct 10 07:44:44 2011] Mean chipx,y = (343.75, 567.16)
[Mon Oct 10 07:44:44 2011] Mean tdetx,y = (4564.84, 4450.75)
[Mon Oct 10 07:44:44 2011] chipx,y range = (323.00-367.00, 547.00-589.00)
[Mon Oct 10 07:44:45 2011] Size of ../../acisf11714/products/events/fullrun_ccd1_acisf11714_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 619 counts
[Mon Oct 10 07:44:45 2011] ../../acisf11714/products/images/fullrun_ccd1_acisf11714_pi14-548_pass1_cl_src1_src.img and ../../acisf11714/products/images/fullrun_ccd1_acisf11714_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Oct 10 07:44:45 2011] ../../acisf11714/products/spectra/fullrun_ccd1_acisf11714_pi14-548_pass1_cl_src1_src.pi and ../../acisf11714/products/spectra/fullrun_ccd1_acisf11714_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Oct 10 07:44:47 2011] ../../acisf11714/products/lightcurves/fullrun_ccd1_acisf11714_pi14-548_pass1_cl_src1_src.lc and ../../acisf11714/products/lightcurves/fullrun_ccd1_acisf11714_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Oct 10 07:45:35 2011] Keeping rmf generated by specextract
[Mon Oct 10 07:45:35 2011] 191.235
[Mon Oct 10 07:48:42 2011] Updating aperture counts using extracted products
[Mon Oct 10 07:48:42 2011] Error reading totcts from fullrun_ccd1_acisf11714_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Oct 10 07:48:42 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 07:48:42 2011] Using photon index=1.80, rate=0.00396, arf fullrun_ccd1_acisf11714_pi14-548_pass1_cl_src1.arf
[Mon Oct 10 07:48:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 07:48:42 2011] Updating source flux to 4.6e-14
[Mon Oct 10 07:49:30 2011] Reading fit data from acisf11714/analysis//spectral/fullrun_ccd1_acisf11714_pi14-548_pass1_cl_src1_pl.csv
[Mon Oct 10 07:49:30 2011] Spectral fit parameter nH value = 1.01299e+22
[Mon Oct 10 07:49:30 2011] Spectral fit parameter PhoIndex value = 2.77871
[Mon Oct 10 07:49:30 2011] Failed to get F(0.3-8.0) from acisf11714/analysis//spectral/fullrun_ccd1_acisf11714_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Oct 10 07:49:30 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 07:49:30 2011] Using Nh = 1e+22, photon index=2.78, rate=0.00396, arf fullrun_ccd1_acisf11714_pi14-548_pass1_cl_src1.arf
[Mon Oct 10 07:49:30 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 07:49:31 2011] Updating source flux to 4.1e-14