[Fri Sep 30 21:12:28 2011] Detection parameters:
  Position = (1247.6, 904.4) = 3 19 37.51 41 38 44.3
  Extent = 0.6" x 0.6", rotation angle = 121 degrees
  Source counts = 586.2 +/- 25.7
  Background counts = 71.8
  Rate = 0.005 +/- 0.0002

[Fri Sep 30 21:12:36 2011] Off-axis axis estimate = 1.88'
[Fri Sep 30 21:28:14 2011] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 21:28:14 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Fri Sep 30 21:28:14 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.233
[Fri Sep 30 21:28:14 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.42"
[Fri Sep 30 21:28:16 2011] fullrun_ccd3_acisf11713_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 30 21:28:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11713_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 21:28:16 2011] fullrun_ccd3_acisf11713_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 30 21:28:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11713_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 21:28:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11713_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11713_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 21:28:17 2011] fullrun_ccd3_acisf11713_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 30 21:28:17 2011] fullrun_ccd3_acisf11713_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 30 21:28:17 2011] Fit fullrun_ccd3_acisf11713_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 30 21:28:57 2011] Spatial fit model total counts = 729.821000, observed total counts = 731.000000
[Fri Sep 30 21:28:57 2011] Offset between fit and detection position for source 1 = 0.557102 pixels
[Fri Sep 30 21:28:57 2011] 733.336000 total counts/ 175.101000 bgd. counts: snr = 42.186427
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.557102 pixels
  Position = (1248.1, 904.7) = 3 19 37.51 41 38 44.2
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 558.2 +/- 27.1
  Background counts = 175.1
  Rate = 0.005 +/- 0.0002
[Fri Sep 30 21:28:57 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 21:28:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 21:28:57 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 21:28:57 2011] Source does appear to be extended
[Fri Sep 30 21:28:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 21:29:36 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 21:29:36 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Fri Sep 30 21:29:36 2011] source mask rpix=0.9, npix_max = 8, mask sum = 6, frac = 0.747
[Fri Sep 30 21:29:36 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.45"
[Fri Sep 30 21:29:38 2011] fullrun_ccd3_acisf11713_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 30 21:29:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11713_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 21:29:38 2011] fullrun_ccd3_acisf11713_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 30 21:29:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11713_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 21:29:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11713_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11713_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 21:29:39 2011] fullrun_ccd3_acisf11713_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 30 21:29:39 2011] fullrun_ccd3_acisf11713_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 30 21:29:39 2011] Fit fullrun_ccd3_acisf11713_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 30 21:30:02 2011] Spatial fit model total counts = 726.859000, observed total counts = 726.000000
[Fri Sep 30 21:30:02 2011] Offset between fit and detection position for source 1 = 0.002777 pixels
[Fri Sep 30 21:30:02 2011] 730.471000 total counts/ 168.215000 bgd. counts: snr = 43.351261
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.002777 pixels
  Position = (1248.1, 904.7) = 3 19 37.51 41 38 44.2
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 562.3 +/- 27.0
  Background counts = 168.2
  Rate = 0.005 +/- 0.0002
[Fri Sep 30 21:30:02 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 21:30:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 21:30:02 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 21:30:02 2011] Source does appear to be extended
[Fri Sep 30 21:30:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 21:34:30 2011] Not overwriting source region fullrun_ccd3_acisf11713_pi14-548_pass1_cl_src1_src.reg
[Fri Sep 30 21:34:30 2011] Extracting stamp from image fullrun_ccd3_acisf11713_pi14-548_cl_sm2.00.img.gz, (1227, 884) - (1269, 925)
[Fri Sep 30 21:34:30 2011] Writing fullrun_ccd3_acisf11713_pi14-548_pass1_cl_src1.gif
[Fri Sep 30 21:34:31 2011] ../../acisf11713/products/events/fullrun_ccd3_acisf11713_pi14-548_pass1_cl_src1_src.evt and ../../acisf11713/products/events/fullrun_ccd3_acisf11713_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Sep 30 21:34:31 2011] Size of ../../acisf11713/products/events/fullrun_ccd3_acisf11713_pi14-548_pass1_cl_src1_src.evt.gz[events] = 591 counts
[Fri Sep 30 21:34:31 2011] Mean chipx,y = (970.46, 792.52)
[Fri Sep 30 21:34:31 2011] Mean tdetx,y = (4339.48, 4031.46)
[Fri Sep 30 21:34:31 2011] chipx,y range = (949.00-992.00, 772.00-813.00)
[Fri Sep 30 21:34:31 2011] Size of ../../acisf11713/products/events/fullrun_ccd3_acisf11713_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 291 counts
[Fri Sep 30 21:34:31 2011] ../../acisf11713/products/images/fullrun_ccd3_acisf11713_pi14-548_pass1_cl_src1_src.img and ../../acisf11713/products/images/fullrun_ccd3_acisf11713_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Sep 30 21:34:31 2011] ../../acisf11713/products/spectra/fullrun_ccd3_acisf11713_pi14-548_pass1_cl_src1_src.pi and ../../acisf11713/products/spectra/fullrun_ccd3_acisf11713_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Sep 30 21:34:34 2011] ../../acisf11713/products/lightcurves/fullrun_ccd3_acisf11713_pi14-548_pass1_cl_src1_src.lc and ../../acisf11713/products/lightcurves/fullrun_ccd3_acisf11713_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Sep 30 21:35:21 2011] Keeping rmf generated by specextract
[Fri Sep 30 21:35:21 2011] 200.701
[Fri Sep 30 21:35:58 2011] Updating aperture counts using extracted products
[Fri Sep 30 21:35:58 2011] Error reading totcts from fullrun_ccd3_acisf11713_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Sep 30 21:35:59 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 21:35:59 2011] Using photon index=1.80, rate=0.00501, arf fullrun_ccd3_acisf11713_pi14-548_pass1_cl_src1.arf
[Fri Sep 30 21:35:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 21:35:59 2011] Updating source flux to 5.6e-14
[Fri Sep 30 21:40:38 2011] Reading fit data from acisf11713/analysis//spectral/fullrun_ccd3_acisf11713_pi14-548_pass1_cl_src1_pl.csv
[Fri Sep 30 21:40:38 2011] Spectral fit parameter nH value = 8.60359e+21
[Fri Sep 30 21:40:38 2011] Spectral fit parameter PhoIndex value = 2.21565
[Fri Sep 30 21:40:38 2011] Failed to get F(0.3-8.0) from acisf11713/analysis//spectral/fullrun_ccd3_acisf11713_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Sep 30 21:40:38 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 21:40:38 2011] Using Nh = 8.6e+21, photon index=2.22, rate=0.00501, arf fullrun_ccd3_acisf11713_pi14-548_pass1_cl_src1.arf
[Fri Sep 30 21:40:38 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 21:40:38 2011] Updating source flux to 5.9e-14