[Fri Sep 30 21:11:57 2011] Detection parameters:
  Position = (295.4, 659.6) = 3 19 44.99 41 31 9.8
  Extent = 0.5" x 0.5", rotation angle = 58 degrees
  Source counts = 152.3 +/- 38.6
  Background counts = 1335.7
  Rate = 0.001 +/- 0.0003

[Fri Sep 30 21:12:27 2011] Off-axis axis estimate = 6.81'
[Fri Sep 30 21:28:03 2011] Using EEF radius (= 2.07 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 21:28:03 2011] Initial guess for spatial extent in simple fitting = 2.07"
[Fri Sep 30 21:28:03 2011] source mask rpix=4.2, npix_max = 88, mask sum = 81, frac = 0.914
[Fri Sep 30 21:28:03 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 2.07"
[Fri Sep 30 21:28:06 2011] fullrun_ccd2_acisf11713_pi14-548_cl_pass0_src29.ximg exists
[Fri Sep 30 21:28:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11713_pi14-548_cl_pass0_src29.csv
[Fri Sep 30 21:28:06 2011] fullrun_ccd2_acisf11713_pi14-548_cl_pass0_src29_1.ximg exists
[Fri Sep 30 21:28:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11713_pi14-548_cl_pass0_src29.csv
[Fri Sep 30 21:28:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11713_pi14-548_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11713_pi14-548_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 21:28:10 2011] fullrun_ccd2_acisf11713_pi14-548_cl_pass0_tfrozen_src29.ximg exists
[Fri Sep 30 21:28:10 2011] fullrun_ccd2_acisf11713_pi14-548_cl_pass0_tfrozen_src29_1.ximg exists
[Fri Sep 30 21:28:10 2011] Fit fullrun_ccd2_acisf11713_pi14-548_cl_pass0_tfrozen_src29 appears to have run properly
[Fri Sep 30 21:28:51 2011] Spatial fit model total counts = 16230.100000, observed total counts = 16225.000000
[Fri Sep 30 21:28:51 2011] Offset between fit and detection position for source 41 = 3.478290 pixels
[Fri Sep 30 21:28:51 2011] Warning, changing simple spatial fit ID from 29 to 12
[Fri Sep 30 21:28:51 2011] 15670.000043 total counts/ 15670.000000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 3.478290 pixels
  Position = (293.2, 662.2) = 3 19 45.11 41 31 10.8
  Extent = 4.4 (0.5-8.2)", rotation angle = 0
  Source counts = 0.0 +/- 125.2
  Background counts = 15670.0
  Rate = 4e-10 +/- 0.001
  Deleting source due to low Poisson probability