[Fri Sep 30 21:11:50 2011] Detection parameters:
  Position = (842.8, 319.3) = 3 19 25.07 41 40 26.2
  Extent = 0.7" x 0.5", rotation angle = 42 degrees
  Source counts = 191.4 +/- 15.0
  Background counts = 32.6
  Rate = 0.002 +/- 0.0001

[Fri Sep 30 21:11:52 2011] Off-axis axis estimate = 3.19'
[Fri Sep 30 21:28:01 2011] Using EEF radius (= 0.62 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 21:28:01 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 21:28:01 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Fri Sep 30 21:28:01 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.969
[Fri Sep 30 21:28:01 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.62"
[Fri Sep 30 21:28:02 2011] fullrun_ccd1_acisf11713_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 30 21:28:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11713_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 21:28:02 2011] fullrun_ccd1_acisf11713_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 30 21:28:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11713_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 21:28:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11713_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11713_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 21:28:02 2011] fullrun_ccd1_acisf11713_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 30 21:28:02 2011] fullrun_ccd1_acisf11713_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 30 21:28:02 2011] Fit fullrun_ccd1_acisf11713_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 30 21:28:34 2011] Spatial fit model total counts = 283.647000, observed total counts = 281.000000
[Fri Sep 30 21:28:34 2011] Offset between fit and detection position for source 7 = 0.620504 pixels
[Fri Sep 30 21:28:34 2011] 283.194000 total counts/ 106.329000 bgd. counts: snr = 17.152050
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.620504 pixels
  Position = (843.2, 319.8) = 3 19 25.08 41 40 26.2
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 176.9 +/- 16.8
  Background counts = 106.3
  Rate = 0.002 +/- 0.0001
[Fri Sep 30 21:28:34 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 21:28:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 21:28:34 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 21:28:34 2011] Source does appear to be extended
[Fri Sep 30 21:28:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 21:29:28 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 21:29:28 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 21:29:28 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Fri Sep 30 21:29:28 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.935
[Fri Sep 30 21:29:28 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.52"
[Fri Sep 30 21:29:30 2011] fullrun_ccd1_acisf11713_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 30 21:29:30 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf11713_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 21:29:30 2011] fullrun_ccd1_acisf11713_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 30 21:29:30 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf11713_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 21:29:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11713_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11713_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 21:29:30 2011] fullrun_ccd1_acisf11713_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 30 21:29:30 2011] fullrun_ccd1_acisf11713_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 30 21:29:30 2011] Fit fullrun_ccd1_acisf11713_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 30 21:29:52 2011] Spatial fit model total counts = 281.479000, observed total counts = 281.000000
[Fri Sep 30 21:29:52 2011] Offset between fit and detection position for source 7 = 0.007237 pixels
[Fri Sep 30 21:29:52 2011] 280.210000 total counts/ 102.498000 bgd. counts: snr = 17.553311
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.007237 pixels
  Position = (843.2, 319.8) = 3 19 25.08 41 40 26.2
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 177.7 +/- 16.7
  Background counts = 102.5
  Rate = 0.002 +/- 0.0001
[Fri Sep 30 21:29:52 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 21:29:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 21:29:52 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 21:29:52 2011] Source does appear to be extended
[Fri Sep 30 21:29:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 21:31:24 2011] Not overwriting source region fullrun_ccd1_acisf11713_pi14-548_pass1_cl_src7_src.reg
[Fri Sep 30 21:31:24 2011] Extracting stamp from image fullrun_ccd1_acisf11713_pi14-548_cl_sm2.00.img.gz, (819, 296) - (867, 344)
[Fri Sep 30 21:31:24 2011] Writing fullrun_ccd1_acisf11713_pi14-548_pass1_cl_src7.gif
[Fri Sep 30 21:31:25 2011] ../../acisf11713/products/events/fullrun_ccd1_acisf11713_pi14-548_pass1_cl_src7_src.evt and ../../acisf11713/products/events/fullrun_ccd1_acisf11713_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Fri Sep 30 21:31:26 2011] Size of ../../acisf11713/products/events/fullrun_ccd1_acisf11713_pi14-548_pass1_cl_src7_src.evt.gz[events] = 201 counts
[Fri Sep 30 21:31:26 2011] Mean chipx,y = (268.52, 868.67)
[Fri Sep 30 21:31:26 2011] Mean tdetx,y = (4263.33, 4375.52)
[Fri Sep 30 21:31:26 2011] chipx,y range = (245.00-288.00, 847.00-889.00)
[Fri Sep 30 21:31:26 2011] Size of ../../acisf11713/products/events/fullrun_ccd1_acisf11713_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 209 counts
[Fri Sep 30 21:31:26 2011] ../../acisf11713/products/images/fullrun_ccd1_acisf11713_pi14-548_pass1_cl_src7_src.img and ../../acisf11713/products/images/fullrun_ccd1_acisf11713_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Fri Sep 30 21:31:26 2011] ../../acisf11713/products/spectra/fullrun_ccd1_acisf11713_pi14-548_pass1_cl_src7_src.pi and ../../acisf11713/products/spectra/fullrun_ccd1_acisf11713_pi14-548_pass1_cl_src7_bgd.pi exist, delete to re-create
[Fri Sep 30 21:31:29 2011] ../../acisf11713/products/lightcurves/fullrun_ccd1_acisf11713_pi14-548_pass1_cl_src7_src.lc and ../../acisf11713/products/lightcurves/fullrun_ccd1_acisf11713_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Fri Sep 30 21:32:22 2011] Keeping rmf generated by specextract
[Fri Sep 30 21:32:22 2011] 197.273
[Fri Sep 30 21:35:53 2011] Updating aperture counts using extracted products
[Fri Sep 30 21:35:53 2011] Error reading totcts from fullrun_ccd1_acisf11713_pi14-548_pass1_cl_src7_src.pi.gz
[Fri Sep 30 21:35:54 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 21:35:54 2011] Using photon index=1.80, rate=0.00158, arf fullrun_ccd1_acisf11713_pi14-548_pass1_cl_src7.arf
[Fri Sep 30 21:35:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 21:35:54 2011] Updating source flux to 1.8e-14
[Fri Sep 30 21:36:22 2011] Reading fit data from acisf11713/analysis//spectral/fullrun_ccd1_acisf11713_pi14-548_pass1_cl_src7_pl.csv
[Fri Sep 30 21:36:22 2011] Spectral fit parameter nH value = 1.48691e+21
[Fri Sep 30 21:36:22 2011] Spectral fit parameter PhoIndex value = 2.01127
[Fri Sep 30 21:36:22 2011] Failed to get F(0.3-8.0) from acisf11713/analysis//spectral/fullrun_ccd1_acisf11713_pi14-548_pass1_cl_src7_pl.csv, possibly due to different flux energy range selected
[Fri Sep 30 21:36:22 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 21:36:22 2011] Using Nh = 1.5e+21, photon index=2.01, rate=0.00158, arf fullrun_ccd1_acisf11713_pi14-548_pass1_cl_src7.arf
[Fri Sep 30 21:36:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 21:36:22 2011] Updating source flux to 1.7e-14