[Fri Sep 30 21:11:51 2011] Detection parameters:
  Position = (810.7, 677.8) = 3 19 26.48 41 43 22.5
  Extent = 0.5" x 0.5", rotation angle = 130 degrees
  Source counts = 18.7 +/- 6.4
  Background counts = 22.3
  Rate = 0.0002 +/- 6e-05

[Fri Sep 30 21:11:52 2011] Off-axis axis estimate = 6.01'
[Fri Sep 30 21:28:01 2011] Using EEF radius (= 1.64 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 21:28:01 2011] Initial guess for spatial extent in simple fitting = 1.64"
[Fri Sep 30 21:28:01 2011] source mask rpix=3.3, npix_max = 58, mask sum = 44, frac = 0.751
[Fri Sep 30 21:28:01 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 1.64"
[Fri Sep 30 21:28:02 2011] fullrun_ccd1_acisf11713_pi14-548_cl_pass0_src15.ximg exists
[Fri Sep 30 21:28:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11713_pi14-548_cl_pass0_src15.csv
[Fri Sep 30 21:28:02 2011] fullrun_ccd1_acisf11713_pi14-548_cl_pass0_src15_1.ximg exists
[Fri Sep 30 21:28:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11713_pi14-548_cl_pass0_src15.csv
[Fri Sep 30 21:28:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11713_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11713_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 21:28:03 2011] fullrun_ccd1_acisf11713_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Fri Sep 30 21:28:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11713_pi14-548_cl_pass0_tfrozen_src15.csv
[Fri Sep 30 21:28:03 2011] fullrun_ccd1_acisf11713_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Sep 30 21:28:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11713_pi14-548_cl_pass0_tfrozen_src15.csv
[Fri Sep 30 21:28:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11713_pi14-548_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11713_pi14-548_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 21:28:34 2011] Spatial fit model total counts = 149.294000, observed total counts = 132.000000
[Fri Sep 30 21:28:34 2011] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Sep 30 21:28:34 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 21:28:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 21:28:34 2011] Assessing source extent using major
[Fri Sep 30 21:28:34 2011] Source does appear to be extended
[Fri Sep 30 21:28:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 21:28:34 2011] Deleting source due to low Poisson probability 1.0