[Fri Sep 30 21:11:46 2011] Detection parameters:
  Position = (167.8, 672.3) = 3 19 20.12 41 37 45.7
  Extent = 0.7" x 0.7", rotation angle = 8 degrees
  Source counts = 150.0 +/- 13.9
  Background counts = 43.0
  Rate = 0.001 +/- 0.0001

[Fri Sep 30 21:11:48 2011] Off-axis axis estimate = 1.96'
[Fri Sep 30 21:27:59 2011] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 21:27:59 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Fri Sep 30 21:27:59 2011] source mask rpix=0.9, npix_max = 7, mask sum = 7, frac = 0.938
[Fri Sep 30 21:27:59 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.43"
[Fri Sep 30 21:28:00 2011] fullrun_ccd0_acisf11713_pi14-548_cl_pass0_src3.ximg exists
[Fri Sep 30 21:28:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11713_pi14-548_cl_pass0_src3.csv
[Fri Sep 30 21:28:00 2011] fullrun_ccd0_acisf11713_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Sep 30 21:28:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11713_pi14-548_cl_pass0_src3.csv
[Fri Sep 30 21:28:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11713_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11713_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 21:28:00 2011] fullrun_ccd0_acisf11713_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Sep 30 21:28:00 2011] fullrun_ccd0_acisf11713_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Sep 30 21:28:00 2011] Fit fullrun_ccd0_acisf11713_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Sep 30 21:28:31 2011] Spatial fit model total counts = 332.968000, observed total counts = 350.000000
[Fri Sep 30 21:28:31 2011] Offset between fit and detection position for source 3 = 0.861083 pixels
[Fri Sep 30 21:28:31 2011] 331.120000 total counts/ 119.853000 bgd. counts: snr = 19.297774
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.861083 pixels
  Position = (168.5, 672.9) = 3 19 20.11 41 37 45.8
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 211.3 +/- 18.2
  Background counts = 119.9
  Rate = 0.002 +/- 0.0002
[Fri Sep 30 21:28:31 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 21:28:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 21:28:31 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 21:28:31 2011] Source does appear to be extended
[Fri Sep 30 21:28:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 21:29:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 21:29:25 2011] Initial guess for spatial extent in simple fitting = 0.51"
[Fri Sep 30 21:29:25 2011] source mask rpix=1.0, npix_max = 9, mask sum = 6, frac = 0.630
[Fri Sep 30 21:29:25 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.51"
[Fri Sep 30 21:29:27 2011] fullrun_ccd0_acisf11713_pi14-548_cl_pass1_src3.ximg exists
[Fri Sep 30 21:29:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11713_pi14-548_cl_pass1_src3.csv
[Fri Sep 30 21:29:27 2011] fullrun_ccd0_acisf11713_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Sep 30 21:29:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11713_pi14-548_cl_pass1_src3.csv
[Fri Sep 30 21:29:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11713_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11713_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 21:29:28 2011] fullrun_ccd0_acisf11713_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Sep 30 21:29:28 2011] fullrun_ccd0_acisf11713_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Sep 30 21:29:28 2011] Fit fullrun_ccd0_acisf11713_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Sep 30 21:29:50 2011] Spatial fit model total counts = 333.401000, observed total counts = 350.000000
[Fri Sep 30 21:29:50 2011] Offset between fit and detection position for source 3 = 0.001825 pixels
[Fri Sep 30 21:29:50 2011] 331.566000 total counts/ 120.260000 bgd. counts: snr = 19.268647
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.001825 pixels
  Position = (168.5, 672.9) = 3 19 20.11 41 37 45.8
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 211.3 +/- 18.2
  Background counts = 120.3
  Rate = 0.002 +/- 0.0002
[Fri Sep 30 21:29:50 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 21:29:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 21:29:50 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 21:29:50 2011] Source does appear to be extended
[Fri Sep 30 21:29:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 21:30:27 2011] Not overwriting source region fullrun_ccd0_acisf11713_pi14-548_pass1_cl_src3_src.reg
[Fri Sep 30 21:30:27 2011] Extracting stamp from image fullrun_ccd0_acisf11713_pi14-548_cl_sm2.00.img.gz, (145, 650) - (192, 696)
[Fri Sep 30 21:30:27 2011] Writing fullrun_ccd0_acisf11713_pi14-548_pass1_cl_src3.gif
[Fri Sep 30 21:30:35 2011] ../../acisf11713/products/events/fullrun_ccd0_acisf11713_pi14-548_pass1_cl_src3_src.evt and ../../acisf11713/products/events/fullrun_ccd0_acisf11713_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri Sep 30 21:30:35 2011] Size of ../../acisf11713/products/events/fullrun_ccd0_acisf11713_pi14-548_pass1_cl_src3_src.evt.gz[events] = 254 counts
[Fri Sep 30 21:30:35 2011] Mean chipx,y = (925.78, 902.76)
[Fri Sep 30 21:30:35 2011] Mean tdetx,y = (3963.76, 4206.22)
[Fri Sep 30 21:30:35 2011] chipx,y range = (909.00-950.00, 880.00-924.00)
[Fri Sep 30 21:30:35 2011] Size of ../../acisf11713/products/events/fullrun_ccd0_acisf11713_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 278 counts
[Fri Sep 30 21:30:35 2011] ../../acisf11713/products/images/fullrun_ccd0_acisf11713_pi14-548_pass1_cl_src3_src.img and ../../acisf11713/products/images/fullrun_ccd0_acisf11713_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri Sep 30 21:30:35 2011] ../../acisf11713/products/spectra/fullrun_ccd0_acisf11713_pi14-548_pass1_cl_src3_src.pi and ../../acisf11713/products/spectra/fullrun_ccd0_acisf11713_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri Sep 30 21:30:39 2011] ../../acisf11713/products/lightcurves/fullrun_ccd0_acisf11713_pi14-548_pass1_cl_src3_src.lc and ../../acisf11713/products/lightcurves/fullrun_ccd0_acisf11713_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri Sep 30 21:31:23 2011] Keeping rmf generated by specextract
[Fri Sep 30 21:31:24 2011] 202.872
[Fri Sep 30 21:35:52 2011] Updating aperture counts using extracted products
[Fri Sep 30 21:35:52 2011] Error reading totcts from fullrun_ccd0_acisf11713_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Sep 30 21:35:53 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 21:35:53 2011] Using photon index=1.80, rate=0.00188, arf fullrun_ccd0_acisf11713_pi14-548_pass1_cl_src3.arf
[Fri Sep 30 21:35:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 21:35:53 2011] Updating source flux to 2.1e-14
[Fri Sep 30 21:36:12 2011] Reading fit data from acisf11713/analysis//spectral/fullrun_ccd0_acisf11713_pi14-548_pass1_cl_src3_pl.csv
[Fri Sep 30 21:36:12 2011] Spectral fit parameter nH value = 6.20051e+21
[Fri Sep 30 21:36:12 2011] Spectral fit parameter PhoIndex value = 6.98977
[Fri Sep 30 21:36:12 2011] Failed to get F(0.3-8.0) from acisf11713/analysis//spectral/fullrun_ccd0_acisf11713_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Fri Sep 30 21:36:12 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 21:36:12 2011] Using Nh = 6.2e+21, photon index=6.99, rate=0.00188, arf fullrun_ccd0_acisf11713_pi14-548_pass1_cl_src3.arf
[Fri Sep 30 21:36:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 21:36:12 2011] Updating source flux to 1.5e-14