[Wed Oct  5 13:35:17 2011] Detection parameters:
  Position = (535.9, 932.1) = 9 40 46.57 7 45 9.5
  Extent = 0.7" x 0.5", rotation angle = 6 degrees
  Source counts = 15.4 +/- 4.0
  Background counts = 0.6
  Rate = 0.0006 +/- 0.0001

[Wed Oct  5 13:35:19 2011] Off-axis axis estimate = 2.69'
[Wed Oct  5 13:36:12 2011] Using EEF radius (= 0.52 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 13:36:12 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Wed Oct  5 13:36:12 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.920
[Wed Oct  5 13:36:12 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.52"
[Wed Oct  5 13:36:13 2011] fullrun_ccd3_acisf11712_pi14-548_cl_pass0_src5.ximg exists
[Wed Oct  5 13:36:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11712_pi14-548_cl_pass0_src5.csv
[Wed Oct  5 13:36:13 2011] fullrun_ccd3_acisf11712_pi14-548_cl_pass0_src5_1.ximg exists
[Wed Oct  5 13:36:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11712_pi14-548_cl_pass0_src5.csv
[Wed Oct  5 13:36:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11712_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11712_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 13:36:13 2011] fullrun_ccd3_acisf11712_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Wed Oct  5 13:36:13 2011] fullrun_ccd3_acisf11712_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Oct  5 13:36:13 2011] Fit fullrun_ccd3_acisf11712_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Oct  5 13:36:24 2011] Spatial fit model total counts = 20.604800, observed total counts = 22.000000
[Wed Oct  5 13:36:24 2011] Offset between fit and detection position for source 6 = 0.461040 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.461040 pixels
  Position = (536.2, 932.5) = 9 40 46.58 7 45 9.4
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 20.6 +/- 4.5
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Wed Oct  5 13:36:24 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 13:36:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 13:36:24 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 13:36:24 2011] Source does appear to be extended
[Wed Oct  5 13:36:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 13:37:03 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 13:37:03 2011] Initial guess for spatial extent in simple fitting = 0.70"
[Wed Oct  5 13:37:03 2011] source mask rpix=1.4, npix_max = 14, mask sum = 9, frac = 0.604
[Wed Oct  5 13:37:03 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.70"
[Wed Oct  5 13:37:04 2011] fullrun_ccd3_acisf11712_pi14-548_cl_pass1_src5.ximg exists
[Wed Oct  5 13:37:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11712_pi14-548_cl_pass1_src5.csv
[Wed Oct  5 13:37:04 2011] fullrun_ccd3_acisf11712_pi14-548_cl_pass1_src5_1.ximg exists
[Wed Oct  5 13:37:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11712_pi14-548_cl_pass1_src5.csv
[Wed Oct  5 13:37:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11712_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11712_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 13:37:04 2011] fullrun_ccd3_acisf11712_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Wed Oct  5 13:37:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11712_pi14-548_cl_pass1_tfrozen_src5.csv
[Wed Oct  5 13:37:04 2011] fullrun_ccd3_acisf11712_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Oct  5 13:37:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11712_pi14-548_cl_pass1_tfrozen_src5.csv
[Wed Oct  5 13:37:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11712_pi14-548_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11712_pi14-548_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 13:37:15 2011] Spatial fit model total counts = 19.438400, observed total counts = 22.000000
[Wed Oct  5 13:37:15 2011] Offset between fit and detection position for source 6 = 0.136890 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.136890 pixels
  Position = (536.2, 932.4) = 9 40 46.57 7 45 9.4
  Extent = 0.8 (0.6-0.9)", rotation angle = 0
  Source counts = 19.4 +/- 4.4
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0002
[Wed Oct  5 13:37:15 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 13:37:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 13:37:15 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 13:37:15 2011] Source does appear to be extended
[Wed Oct  5 13:37:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 13:56:19 2011] Not overwriting source region fullrun_ccd3_acisf11712_pi14-548_pass1_cl_src6_src.reg
[Wed Oct  5 13:56:19 2011] Extracting stamp from image fullrun_ccd3_acisf11712_pi14-548_cl_sm2.00.img.gz, (500, 897) - (572, 968)
[Wed Oct  5 13:56:19 2011] Writing fullrun_ccd3_acisf11712_pi14-548_pass1_cl_src6.gif
[Wed Oct  5 13:59:01 2011] ../../acisf11712/products/events/fullrun_ccd3_acisf11712_pi14-548_pass1_cl_src6_src.evt and ../../acisf11712/products/events/fullrun_ccd3_acisf11712_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Wed Oct  5 13:59:01 2011] Size of ../../acisf11712/products/events/fullrun_ccd3_acisf11712_pi14-548_pass1_cl_src6_src.evt.gz[events] = 22 counts
[Wed Oct  5 13:59:01 2011] Mean chipx,y = (531.82, 808.27)
[Wed Oct  5 13:59:01 2011] Mean tdetx,y = (4323.73, 3592.82)
[Wed Oct  5 13:59:01 2011] chipx,y range = (515.00-550.00, 793.00-825.00)
[Wed Oct  5 13:59:01 2011] Size of ../../acisf11712/products/events/fullrun_ccd3_acisf11712_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 15 counts
[Wed Oct  5 13:59:01 2011] ../../acisf11712/products/images/fullrun_ccd3_acisf11712_pi14-548_pass1_cl_src6_src.img and ../../acisf11712/products/images/fullrun_ccd3_acisf11712_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Wed Oct  5 13:59:01 2011] Not generating rmf since there are only 19 counts
[Wed Oct  5 13:59:01 2011] arf not found, will run specextract
[Wed Oct  5 13:59:37 2011] ../../acisf11712/products/spectra/fullrun_ccd3_acisf11712_pi14-548_pass1_cl_src6.warf not found
[Wed Oct  5 13:59:37 2011] ../../acisf11712/products/spectra/fullrun_ccd3_acisf11712_pi14-548_pass1_cl_src6.wrmf not found
[Wed Oct  5 13:59:37 2011] Removal of ../../acisf11712/products/spectra/fullrun_ccd3_acisf11712_pi14-548_pass1_cl_src6.soff failed
[Wed Oct  5 13:59:45 2011] ../../acisf11712/products/lightcurves/fullrun_ccd3_acisf11712_pi14-548_pass1_cl_src6_src.lc and ../../acisf11712/products/lightcurves/fullrun_ccd3_acisf11712_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Wed Oct  5 14:10:09 2011] Spectrum 6 has only 19 counts, deleting rmf
[Wed Oct  5 14:10:09 2011] 189.971
[Wed Oct  5 14:10:53 2011] Updating aperture counts using extracted products
[Wed Oct  5 14:10:53 2011] Error reading totcts from fullrun_ccd3_acisf11712_pi14-548_pass1_cl_src6_src.pi.gz
[Wed Oct  5 14:10:54 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 14:10:54 2011] Using photon index=1.80, rate=0.000724, arf fullrun_ccd3_acisf11712_pi14-548_pass1_cl_src6.arf
[Wed Oct  5 14:10:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 14:10:54 2011] Updating source flux to 8.9e-15
[Wed Oct  5 14:11:01 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct  5 14:11:02 2011] acisf11712/analysis//spectral/fullrun_ccd3_acisf11712_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete