[Wed Oct  5 13:35:18 2011] Detection parameters:
  Position = (643.0, 1131.7) = 9 40 43.02 7 46 47.7
  Extent = 0.9" x 0.5", rotation angle = 90 degrees
  Source counts = 12.2 +/- 3.6
  Background counts = 0.8
  Rate = 0.0005 +/- 0.0001

[Wed Oct  5 13:35:19 2011] Off-axis axis estimate = 3.60'
[Wed Oct  5 13:36:12 2011] Using EEF radius (= 0.72 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 13:36:12 2011] Initial guess for spatial extent in simple fitting = 0.72"
[Wed Oct  5 13:36:12 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.042
[Wed Oct  5 13:36:12 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 0.72"
[Wed Oct  5 13:36:13 2011] fullrun_ccd3_acisf11712_pi14-548_cl_pass0_src9.ximg exists
[Wed Oct  5 13:36:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11712_pi14-548_cl_pass0_src9.csv
[Wed Oct  5 13:36:13 2011] fullrun_ccd3_acisf11712_pi14-548_cl_pass0_src9_1.ximg exists
[Wed Oct  5 13:36:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11712_pi14-548_cl_pass0_src9.csv
[Wed Oct  5 13:36:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11712_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11712_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 13:36:13 2011] fullrun_ccd3_acisf11712_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Wed Oct  5 13:36:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11712_pi14-548_cl_pass0_tfrozen_src9.csv
[Wed Oct  5 13:36:13 2011] fullrun_ccd3_acisf11712_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Oct  5 13:36:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11712_pi14-548_cl_pass0_tfrozen_src9.csv
[Wed Oct  5 13:36:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11712_pi14-548_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11712_pi14-548_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 13:36:24 2011] Spatial fit model total counts = 13.377200, observed total counts = 16.000000
[Wed Oct  5 13:36:24 2011] Offset between fit and detection position for source 17 = 0.514178 pixels
[Wed Oct  5 13:36:24 2011] 14.319890 total counts/ 2.273990 bgd. counts: snr = 7.988127
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.514178 pixels
  Position = (643.5, 1131.9) = 9 40 43.02 7 46 47.5
  Extent = 0.7 (0.6-1.1)", rotation angle = 0
  Source counts = 12.0 +/- 3.8
  Background counts = 2.3
  Rate = 0.0004 +/- 0.0001
[Wed Oct  5 13:36:24 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 13:36:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 13:36:24 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 13:36:24 2011] Source does appear to be extended
[Wed Oct  5 13:36:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 13:37:03 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 13:37:03 2011] Initial guess for spatial extent in simple fitting = 0.74"
[Wed Oct  5 13:37:03 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.993
[Wed Oct  5 13:37:03 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.74"
[Wed Oct  5 13:37:04 2011] fullrun_ccd3_acisf11712_pi14-548_cl_pass1_src9.ximg exists
[Wed Oct  5 13:37:04 2011] fullrun_ccd3_acisf11712_pi14-548_cl_pass1_src9_1.ximg exists
[Wed Oct  5 13:37:04 2011] Fit fullrun_ccd3_acisf11712_pi14-548_cl_pass1_src9 appears to have run properly
[Wed Oct  5 13:37:04 2011] fullrun_ccd3_acisf11712_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Wed Oct  5 13:37:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11712_pi14-548_cl_pass1_tfrozen_src9.csv
[Wed Oct  5 13:37:04 2011] fullrun_ccd3_acisf11712_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Oct  5 13:37:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11712_pi14-548_cl_pass1_tfrozen_src9.csv
[Wed Oct  5 13:37:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11712_pi14-548_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11712_pi14-548_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 13:37:15 2011] Spatial fit model total counts = 15.425200, observed total counts = 17.000000
[Wed Oct  5 13:37:15 2011] Offset between fit and detection position for source 17 = 0.028577 pixels
[Wed Oct  5 13:37:15 2011] 16.345360 total counts/ 4.071460 bgd. counts: snr = 6.082855
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.028577 pixels
  Position = (643.5, 1131.9) = 9 40 43.02 7 46 47.5
  Extent = 0.7 (0.6-1.2)", rotation angle = 0
  Source counts = 12.3 +/- 4.0
  Background counts = 4.1
  Rate = 0.0005 +/- 0.0002
[Wed Oct  5 13:37:15 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 13:37:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 13:37:15 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 13:37:15 2011] Source does appear to be extended
[Wed Oct  5 13:37:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 13:56:19 2011] Not overwriting source region fullrun_ccd3_acisf11712_pi14-548_pass1_cl_src17_src.reg
[Wed Oct  5 13:56:19 2011] Extracting stamp from image fullrun_ccd3_acisf11712_pi14-548_cl_sm2.00.img.gz, (612, 1100) - (675, 1164)
[Wed Oct  5 13:56:19 2011] Writing fullrun_ccd3_acisf11712_pi14-548_pass1_cl_src17.gif
[Wed Oct  5 14:02:30 2011] ../../acisf11712/products/events/fullrun_ccd3_acisf11712_pi14-548_pass1_cl_src17_src.evt and ../../acisf11712/products/events/fullrun_ccd3_acisf11712_pi14-548_pass1_cl_src17_bgd.evt exist, delete to re-create
[Wed Oct  5 14:02:30 2011] Size of ../../acisf11712/products/events/fullrun_ccd3_acisf11712_pi14-548_pass1_cl_src17_src.evt.gz[events] = 13 counts
[Wed Oct  5 14:02:30 2011] Mean chipx,y = (347.62, 934.62)
[Wed Oct  5 14:02:30 2011] Mean tdetx,y = (4197.38, 3408.62)
[Wed Oct  5 14:02:30 2011] chipx,y range = (332.00-364.00, 918.00-954.00)
[Wed Oct  5 14:02:30 2011] Size of ../../acisf11712/products/events/fullrun_ccd3_acisf11712_pi14-548_pass1_cl_src17_bgd.evt.gz[events] = 13 counts
[Wed Oct  5 14:02:30 2011] ../../acisf11712/products/images/fullrun_ccd3_acisf11712_pi14-548_pass1_cl_src17_src.img and ../../acisf11712/products/images/fullrun_ccd3_acisf11712_pi14-548_pass1_cl_src17_bgd.img exist, delete to re-create
[Wed Oct  5 14:02:30 2011] Not generating rmf since there are only 12 counts
[Wed Oct  5 14:02:30 2011] arf not found, will run specextract
[Wed Oct  5 14:03:08 2011] ../../acisf11712/products/spectra/fullrun_ccd3_acisf11712_pi14-548_pass1_cl_src17.warf not found
[Wed Oct  5 14:03:08 2011] ../../acisf11712/products/spectra/fullrun_ccd3_acisf11712_pi14-548_pass1_cl_src17.wrmf not found
[Wed Oct  5 14:03:08 2011] Removal of ../../acisf11712/products/spectra/fullrun_ccd3_acisf11712_pi14-548_pass1_cl_src17.soff failed
[Wed Oct  5 14:03:15 2011] ../../acisf11712/products/lightcurves/fullrun_ccd3_acisf11712_pi14-548_pass1_cl_src17_src.lc and ../../acisf11712/products/lightcurves/fullrun_ccd3_acisf11712_pi14-548_pass1_cl_src17_bgd.lc exist, delete to re-create
[Wed Oct  5 14:10:09 2011] Spectrum 17 has only 12 counts, deleting rmf
[Wed Oct  5 14:10:09 2011] 186.686
[Wed Oct  5 14:10:53 2011] Updating aperture counts using extracted products
[Wed Oct  5 14:10:53 2011] Error reading totcts from fullrun_ccd3_acisf11712_pi14-548_pass1_cl_src17_src.pi.gz
[Wed Oct  5 14:10:54 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 14:10:54 2011] Using photon index=1.80, rate=0.000457, arf fullrun_ccd3_acisf11712_pi14-548_pass1_cl_src17.arf
[Wed Oct  5 14:10:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 14:10:54 2011] Updating source flux to 5.8e-15
[Wed Oct  5 14:11:01 2011] Source 17 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct  5 14:11:02 2011] acisf11712/analysis//spectral/fullrun_ccd3_acisf11712_pi14-548_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete