[Wed Oct  5 13:35:14 2011] Detection parameters:
  Position = (309.5, 859.5) = 9 41 9.13 7 52 6.4
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 54.8 +/- 7.8
  Background counts = 6.2
  Rate = 0.002 +/- 0.0003

[Wed Oct  5 13:35:16 2011] Off-axis axis estimate = 6.92'
[Wed Oct  5 13:36:11 2011] Using EEF radius (= 2.13 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 13:36:11 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 13:36:11 2011] Initial guess for spatial extent in simple fitting = 2.13"
[Wed Oct  5 13:36:11 2011] source mask rpix=4.3, npix_max = 93, mask sum = 58, frac = 0.620
[Wed Oct  5 13:36:11 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.13"
[Wed Oct  5 13:36:12 2011] fullrun_ccd2_acisf11712_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct  5 13:36:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11712_pi14-548_cl_pass0_src1.csv
[Wed Oct  5 13:36:12 2011] fullrun_ccd2_acisf11712_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct  5 13:36:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11712_pi14-548_cl_pass0_src1.csv
[Wed Oct  5 13:36:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11712_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11712_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 13:36:12 2011] fullrun_ccd2_acisf11712_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct  5 13:36:12 2011] fullrun_ccd2_acisf11712_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct  5 13:36:12 2011] Fit fullrun_ccd2_acisf11712_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct  5 13:36:20 2011] Spatial fit model total counts = 117.341000, observed total counts = 122.000000
[Wed Oct  5 13:36:20 2011] Offset between fit and detection position for source 2 = 1.850841 pixels
[Wed Oct  5 13:36:20 2011] 117.297600 total counts/ 34.087800 bgd. counts: snr = 14.251973
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.850841 pixels
  Position = (311.3, 859.1) = 9 41 9.09 7 52 5.9
  Extent = 1.9 (1.4-2.4)", rotation angle = 0
  Source counts = 83.2 +/- 10.8
  Background counts = 34.1
  Rate = 0.003 +/- 0.0004
[Wed Oct  5 13:36:20 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 13:36:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 13:36:20 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 13:36:20 2011] Source does appear to be extended
[Wed Oct  5 13:36:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 13:36:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 13:36:56 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 13:36:56 2011] Initial guess for spatial extent in simple fitting = 1.85"
[Wed Oct  5 13:36:56 2011] source mask rpix=3.8, npix_max = 72, mask sum = 52, frac = 0.715
[Wed Oct  5 13:36:56 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.85"
[Wed Oct  5 13:37:03 2011] fullrun_ccd2_acisf11712_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct  5 13:37:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11712_pi14-548_cl_pass1_src1.csv
[Wed Oct  5 13:37:03 2011] fullrun_ccd2_acisf11712_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct  5 13:37:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11712_pi14-548_cl_pass1_src1.csv
[Wed Oct  5 13:37:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11712_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11712_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 13:37:03 2011] fullrun_ccd2_acisf11712_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct  5 13:37:03 2011] fullrun_ccd2_acisf11712_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct  5 13:37:03 2011] Fit fullrun_ccd2_acisf11712_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct  5 13:37:13 2011] Spatial fit model total counts = 110.768000, observed total counts = 115.000000
[Wed Oct  5 13:37:13 2011] Offset between fit and detection position for source 2 = 0.389184 pixels
[Wed Oct  5 13:37:13 2011] 110.722800 total counts/ 33.377500 bgd. counts: snr = 13.387732
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.389184 pixels
  Position = (311.6, 858.8) = 9 41 9.08 7 52 5.8
  Extent = 1.7 (1.3-2.3)", rotation angle = 0
  Source counts = 77.3 +/- 10.5
  Background counts = 33.4
  Rate = 0.003 +/- 0.0004
[Wed Oct  5 13:37:13 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 13:37:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 13:37:13 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 13:37:13 2011] Source does appear to be extended
[Wed Oct  5 13:37:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 13:47:15 2011] Not overwriting source region fullrun_ccd2_acisf11712_pi14-548_pass1_cl_src2_src.reg
[Wed Oct  5 13:47:15 2011] Extracting stamp from image fullrun_ccd2_acisf11712_pi14-548_cl_sm2.00.img.gz, (233, 780) - (390, 938)
[Wed Oct  5 13:47:15 2011] Writing fullrun_ccd2_acisf11712_pi14-548_pass1_cl_src2.gif
[Wed Oct  5 13:47:17 2011] ../../acisf11712/products/events/fullrun_ccd2_acisf11712_pi14-548_pass1_cl_src2_src.evt and ../../acisf11712/products/events/fullrun_ccd2_acisf11712_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Wed Oct  5 13:47:17 2011] Size of ../../acisf11712/products/events/fullrun_ccd2_acisf11712_pi14-548_pass1_cl_src2_src.evt.gz[events] = 110 counts
[Wed Oct  5 13:47:17 2011] Mean chipx,y = (261.55, 198.23)
[Wed Oct  5 13:47:17 2011] Mean tdetx,y = (3259.23, 3824.45)
[Wed Oct  5 13:47:17 2011] chipx,y range = (236.00-287.00, 174.00-220.00)
[Wed Oct  5 13:47:17 2011] Size of ../../acisf11712/products/events/fullrun_ccd2_acisf11712_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 76 counts
[Wed Oct  5 13:47:17 2011] ../../acisf11712/products/images/fullrun_ccd2_acisf11712_pi14-548_pass1_cl_src2_src.img and ../../acisf11712/products/images/fullrun_ccd2_acisf11712_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Wed Oct  5 13:47:17 2011] Not generating rmf since there are only 77 counts
[Wed Oct  5 13:47:17 2011] arf not found, will run specextract
[Wed Oct  5 13:47:36 2011] ../../acisf11712/products/spectra/fullrun_ccd2_acisf11712_pi14-548_pass1_cl_src2.warf not found
[Wed Oct  5 13:47:36 2011] ../../acisf11712/products/spectra/fullrun_ccd2_acisf11712_pi14-548_pass1_cl_src2.wrmf not found
[Wed Oct  5 13:47:36 2011] Removal of ../../acisf11712/products/spectra/fullrun_ccd2_acisf11712_pi14-548_pass1_cl_src2.soff failed
[Wed Oct  5 13:47:45 2011] ../../acisf11712/products/lightcurves/fullrun_ccd2_acisf11712_pi14-548_pass1_cl_src2_src.lc and ../../acisf11712/products/lightcurves/fullrun_ccd2_acisf11712_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Wed Oct  5 13:56:18 2011] Spectrum 2 has only 77 counts, deleting rmf
[Wed Oct  5 13:56:18 2011] 166.179
[Wed Oct  5 14:10:53 2011] Updating aperture counts using extracted products
[Wed Oct  5 14:10:53 2011] Error reading totcts from fullrun_ccd2_acisf11712_pi14-548_pass1_cl_src2_src.pi.gz
[Wed Oct  5 14:10:53 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 14:10:53 2011] Using photon index=1.80, rate=0.00288, arf fullrun_ccd2_acisf11712_pi14-548_pass1_cl_src2.arf
[Wed Oct  5 14:10:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 14:10:53 2011] Updating source flux to 4e-14
[Wed Oct  5 14:11:00 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct  5 14:11:01 2011] acisf11712/analysis//spectral/fullrun_ccd2_acisf11712_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete