[Fri Sep 30 04:03:58 2011] Detection parameters:
  Position = (624.6, 359.0) = 21 35 21.10 -1 2 40.8
  Extent = 0.8" x 0.5", rotation angle = 59 degrees
  Source counts = 16.8 +/- 4.2
  Background counts = 1.2
  Rate = 0.0006 +/- 0.0002

[Fri Sep 30 04:04:00 2011] Off-axis axis estimate = 3.24'
[Fri Sep 30 04:05:34 2011] Using EEF radius (= 0.63 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 04:05:34 2011] Initial guess for spatial extent in simple fitting = 0.63"
[Fri Sep 30 04:05:34 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.945
[Fri Sep 30 04:05:34 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 0.63"
[Fri Sep 30 04:05:42 2011] fullrun_ccd3_acisf11710_pi14-548_cl_pass0_src9.ximg exists
[Fri Sep 30 04:05:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11710_pi14-548_cl_pass0_src9.csv
[Fri Sep 30 04:05:42 2011] fullrun_ccd3_acisf11710_pi14-548_cl_pass0_src9_1.ximg exists
[Fri Sep 30 04:05:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11710_pi14-548_cl_pass0_src9.csv
[Fri Sep 30 04:05:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11710_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11710_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 04:05:46 2011] fullrun_ccd3_acisf11710_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Fri Sep 30 04:05:46 2011] fullrun_ccd3_acisf11710_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Sep 30 04:05:46 2011] Fit fullrun_ccd3_acisf11710_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Sep 30 04:06:01 2011] Spatial fit model total counts = 20.475400, observed total counts = 21.000000
[Fri Sep 30 04:06:01 2011] Offset between fit and detection position for source 4 = 0.581035 pixels
[Fri Sep 30 04:06:01 2011] 20.509250 total counts/ 6.461150 bgd. counts: snr = 5.526659
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.581035 pixels
  Position = (624.8, 359.5) = 21 35 21.10 -1 2 40.8
  Extent = 0.6 (0.4-1.0)", rotation angle = 0
  Source counts = 14.0 +/- 4.5
  Background counts = 6.5
  Rate = 0.0005 +/- 0.0002
[Fri Sep 30 04:06:01 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 04:06:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 04:06:01 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 04:06:01 2011] Source does appear to be extended
[Fri Sep 30 04:06:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 04:06:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 04:06:43 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Fri Sep 30 04:06:43 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.978
[Fri Sep 30 04:06:43 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.62"
[Fri Sep 30 04:06:44 2011] fullrun_ccd3_acisf11710_pi14-548_cl_pass1_src9.ximg exists
[Fri Sep 30 04:06:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11710_pi14-548_cl_pass1_src9.csv
[Fri Sep 30 04:06:44 2011] fullrun_ccd3_acisf11710_pi14-548_cl_pass1_src9_1.ximg exists
[Fri Sep 30 04:06:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11710_pi14-548_cl_pass1_src9.csv
[Fri Sep 30 04:06:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11710_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11710_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 04:06:44 2011] fullrun_ccd3_acisf11710_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Fri Sep 30 04:06:44 2011] fullrun_ccd3_acisf11710_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Sep 30 04:06:44 2011] Fit fullrun_ccd3_acisf11710_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Fri Sep 30 04:06:57 2011] Spatial fit model total counts = 21.043700, observed total counts = 21.000000
[Fri Sep 30 04:06:57 2011] Offset between fit and detection position for source 4 = 0.033580 pixels
[Fri Sep 30 04:06:57 2011] 20.845290 total counts/ 6.222290 bgd. counts: snr = 5.862210
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.033580 pixels
  Position = (624.8, 359.5) = 21 35 21.10 -1 2 40.8
  Extent = 0.6 (0.4-1.1)", rotation angle = 0
  Source counts = 14.6 +/- 4.6
  Background counts = 6.2
  Rate = 0.0005 +/- 0.0002
[Fri Sep 30 04:06:57 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 04:06:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 04:06:57 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 04:06:57 2011] Source does appear to be extended
[Fri Sep 30 04:06:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 04:09:53 2011] Not overwriting source region fullrun_ccd3_acisf11710_pi14-548_pass1_cl_src4_src.reg
[Fri Sep 30 04:09:53 2011] Extracting stamp from image fullrun_ccd3_acisf11710_pi14-548_cl_sm2.00.img.gz, (596, 331) - (654, 388)
[Fri Sep 30 04:09:53 2011] Writing fullrun_ccd3_acisf11710_pi14-548_pass1_cl_src4.gif
[Fri Sep 30 04:10:26 2011] ../../acisf11710/products/events/fullrun_ccd3_acisf11710_pi14-548_pass1_cl_src4_src.evt and ../../acisf11710/products/events/fullrun_ccd3_acisf11710_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Fri Sep 30 04:10:26 2011] Size of ../../acisf11710/products/events/fullrun_ccd3_acisf11710_pi14-548_pass1_cl_src4_src.evt.gz[events] = 17 counts
[Fri Sep 30 04:10:26 2011] Mean chipx,y = (493.94, 743.71)
[Fri Sep 30 04:10:26 2011] Mean tdetx,y = (4388.29, 3554.94)
[Fri Sep 30 04:10:26 2011] chipx,y range = (482.00-511.00, 724.00-764.00)
[Fri Sep 30 04:10:26 2011] Size of ../../acisf11710/products/events/fullrun_ccd3_acisf11710_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 19 counts
[Fri Sep 30 04:10:26 2011] ../../acisf11710/products/images/fullrun_ccd3_acisf11710_pi14-548_pass1_cl_src4_src.img and ../../acisf11710/products/images/fullrun_ccd3_acisf11710_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Fri Sep 30 04:10:26 2011] ../../acisf11710/products/spectra/fullrun_ccd3_acisf11710_pi14-548_pass1_cl_src4_src.pi and ../../acisf11710/products/spectra/fullrun_ccd3_acisf11710_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Fri Sep 30 04:10:26 2011] Not generating rmf since there are only 14 counts
[Fri Sep 30 04:10:29 2011] ../../acisf11710/products/lightcurves/fullrun_ccd3_acisf11710_pi14-548_pass1_cl_src4_src.lc and ../../acisf11710/products/lightcurves/fullrun_ccd3_acisf11710_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Fri Sep 30 04:11:44 2011] 175.274
[Fri Sep 30 04:12:02 2011] Updating aperture counts using extracted products
[Fri Sep 30 04:12:02 2011] Error reading totcts from fullrun_ccd3_acisf11710_pi14-548_pass1_cl_src4_src.pi.gz
[Fri Sep 30 04:12:03 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 04:12:03 2011] Using photon index=1.80, rate=0.000548, arf fullrun_ccd3_acisf11710_pi14-548_pass1_cl_src4.arf
[Fri Sep 30 04:12:03 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 04:12:03 2011] Updating source flux to 7.3e-15
[Fri Sep 30 04:12:12 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting