[Fri Sep 30 04:03:59 2011] Detection parameters:
  Position = (994.0, 598.5) = 21 35 8.98 -1 0 43.0
  Extent = 0.5" x 0.5", rotation angle = 70 degrees
  Source counts = 12.0 +/- 3.6
  Background counts = 1.0
  Rate = 0.0005 +/- 0.0001

[Fri Sep 30 04:04:00 2011] Off-axis axis estimate = 3.85'
[Fri Sep 30 04:05:34 2011] Using EEF radius (= 0.79 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 04:05:34 2011] Initial guess for spatial extent in simple fitting = 0.79"
[Fri Sep 30 04:05:34 2011] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.134
[Fri Sep 30 04:05:34 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 0.79"
[Fri Sep 30 04:05:42 2011] fullrun_ccd3_acisf11710_pi14-548_cl_pass0_src15.ximg exists
[Fri Sep 30 04:05:42 2011] fullrun_ccd3_acisf11710_pi14-548_cl_pass0_src15_1.ximg exists
[Fri Sep 30 04:05:42 2011] Fit fullrun_ccd3_acisf11710_pi14-548_cl_pass0_src15 appears to have run properly
[Fri Sep 30 04:05:46 2011] fullrun_ccd3_acisf11710_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Fri Sep 30 04:05:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11710_pi14-548_cl_pass0_tfrozen_src15.csv
[Fri Sep 30 04:05:46 2011] fullrun_ccd3_acisf11710_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Sep 30 04:05:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11710_pi14-548_cl_pass0_tfrozen_src15.csv
[Fri Sep 30 04:05:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11710_pi14-548_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11710_pi14-548_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 04:06:01 2011] Spatial fit model total counts = 13.723400, observed total counts = 15.000000
[Fri Sep 30 04:06:01 2011] Offset between fit and detection position for source 15 = 0.694535 pixels
[Fri Sep 30 04:06:01 2011] 13.343415 total counts/ 0.262215 bgd. counts: snr = 25.545760
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.694535 pixels
  Position = (994.5, 599.0) = 21 35 8.98 -1 0 43.0
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 13.1 +/- 3.7
  Background counts = 0.3
  Rate = 0.0005 +/- 0.0001
[Fri Sep 30 04:06:01 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 04:06:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 04:06:01 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 04:06:01 2011] Source does appear to be extended
[Fri Sep 30 04:06:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 04:06:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 04:06:43 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Fri Sep 30 04:06:43 2011] source mask rpix=1.2, npix_max = 10, mask sum = 12, frac = 1.101
[Fri Sep 30 04:06:43 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.57"
[Fri Sep 30 04:06:44 2011] fullrun_ccd3_acisf11710_pi14-548_cl_pass1_src15.ximg exists
[Fri Sep 30 04:06:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11710_pi14-548_cl_pass1_src15.csv
[Fri Sep 30 04:06:44 2011] fullrun_ccd3_acisf11710_pi14-548_cl_pass1_src15_1.ximg exists
[Fri Sep 30 04:06:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11710_pi14-548_cl_pass1_src15.csv
[Fri Sep 30 04:06:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11710_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11710_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 04:06:44 2011] fullrun_ccd3_acisf11710_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Fri Sep 30 04:06:44 2011] fullrun_ccd3_acisf11710_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Fri Sep 30 04:06:44 2011] Fit fullrun_ccd3_acisf11710_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Fri Sep 30 04:06:57 2011] Spatial fit model total counts = 16.430900, observed total counts = 17.000000
[Fri Sep 30 04:06:57 2011] Offset between fit and detection position for source 15 = 0.202512 pixels
[Fri Sep 30 04:06:57 2011] 16.334720 total counts/ 4.472220 bgd. counts: snr = 5.609377
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.202512 pixels
  Position = (994.4, 598.8) = 21 35 8.98 -1 0 43.1
  Extent = 0.5 (0.3-0.8)", rotation angle = 0
  Source counts = 11.9 +/- 4.0
  Background counts = 4.5
  Rate = 0.0004 +/- 0.0002
[Fri Sep 30 04:06:57 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 04:06:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 04:06:57 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 04:06:57 2011] Source does appear to be extended
[Fri Sep 30 04:06:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 04:09:53 2011] Not overwriting source region fullrun_ccd3_acisf11710_pi14-548_pass1_cl_src15_src.reg
[Fri Sep 30 04:09:53 2011] Extracting stamp from image fullrun_ccd3_acisf11710_pi14-548_cl_sm2.00.img.gz, (972, 577) - (1017, 621)
[Fri Sep 30 04:09:53 2011] Writing fullrun_ccd3_acisf11710_pi14-548_pass1_cl_src15.gif
[Fri Sep 30 04:10:52 2011] ../../acisf11710/products/events/fullrun_ccd3_acisf11710_pi14-548_pass1_cl_src15_src.evt and ../../acisf11710/products/events/fullrun_ccd3_acisf11710_pi14-548_pass1_cl_src15_bgd.evt exist, delete to re-create
[Fri Sep 30 04:10:52 2011] Size of ../../acisf11710/products/events/fullrun_ccd3_acisf11710_pi14-548_pass1_cl_src15_src.evt.gz[events] = 13 counts
[Fri Sep 30 04:10:52 2011] Mean chipx,y = (902.00, 572.31)
[Fri Sep 30 04:10:52 2011] Mean tdetx,y = (4559.69, 3963.00)
[Fri Sep 30 04:10:52 2011] chipx,y range = (889.00-923.00, 556.00-588.00)
[Fri Sep 30 04:10:52 2011] Size of ../../acisf11710/products/events/fullrun_ccd3_acisf11710_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 12 counts
[Fri Sep 30 04:10:52 2011] ../../acisf11710/products/images/fullrun_ccd3_acisf11710_pi14-548_pass1_cl_src15_src.img and ../../acisf11710/products/images/fullrun_ccd3_acisf11710_pi14-548_pass1_cl_src15_bgd.img exist, delete to re-create
[Fri Sep 30 04:10:52 2011] ../../acisf11710/products/spectra/fullrun_ccd3_acisf11710_pi14-548_pass1_cl_src15_src.pi and ../../acisf11710/products/spectra/fullrun_ccd3_acisf11710_pi14-548_pass1_cl_src15_bgd.pi exist, delete to re-create
[Fri Sep 30 04:10:52 2011] Not generating rmf since there are only 11 counts
[Fri Sep 30 04:10:55 2011] ../../acisf11710/products/lightcurves/fullrun_ccd3_acisf11710_pi14-548_pass1_cl_src15_src.lc and ../../acisf11710/products/lightcurves/fullrun_ccd3_acisf11710_pi14-548_pass1_cl_src15_bgd.lc exist, delete to re-create
[Fri Sep 30 04:11:44 2011] 196.177
[Fri Sep 30 04:12:03 2011] Updating aperture counts using extracted products
[Fri Sep 30 04:12:03 2011] Error reading totcts from fullrun_ccd3_acisf11710_pi14-548_pass1_cl_src15_src.pi.gz
[Fri Sep 30 04:12:03 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 04:12:03 2011] Using photon index=1.80, rate=0.000445, arf fullrun_ccd3_acisf11710_pi14-548_pass1_cl_src15.arf
[Fri Sep 30 04:12:03 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 04:12:03 2011] Updating source flux to 5.2e-15
[Fri Sep 30 04:12:12 2011] Source 15 has fewer than 100.000000 counts, skipping spectral fitting