[Fri Sep 30 04:03:57 2011] Detection parameters:
  Position = (601.5, 690.7) = 21 35 15.65 -1 8 24.4
  Extent = 0.8" x 0.6", rotation angle = 133 degrees
  Source counts = 89.3 +/- 9.5
  Background counts = 1.7
  Rate = 0.003 +/- 0.0004

[Fri Sep 30 04:03:58 2011] Off-axis axis estimate = 4.06'
[Fri Sep 30 04:05:31 2011] Using EEF radius (= 0.85 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 04:05:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 04:05:31 2011] Initial guess for spatial extent in simple fitting = 0.85"
[Fri Sep 30 04:05:31 2011] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.261
[Fri Sep 30 04:05:31 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.85"
[Fri Sep 30 04:05:31 2011] fullrun_ccd2_acisf11710_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 30 04:05:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11710_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 04:05:31 2011] fullrun_ccd2_acisf11710_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 30 04:05:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11710_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 04:05:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11710_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11710_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 04:05:33 2011] fullrun_ccd2_acisf11710_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 30 04:05:33 2011] fullrun_ccd2_acisf11710_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 30 04:05:33 2011] Fit fullrun_ccd2_acisf11710_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 30 04:05:57 2011] Spatial fit model total counts = 91.723000, observed total counts = 92.000000
[Fri Sep 30 04:05:57 2011] Offset between fit and detection position for source 6 = 0.681183 pixels
[Fri Sep 30 04:05:57 2011] 91.919900 total counts/ 8.694200 bgd. counts: snr = 28.225565
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.681183 pixels
  Position = (602.1, 691.0) = 21 35 15.65 -1 8 24.5
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 83.2 +/- 9.6
  Background counts = 8.7
  Rate = 0.003 +/- 0.0004
[Fri Sep 30 04:05:57 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 04:05:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 04:05:57 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 04:05:57 2011] Source does appear to be extended
[Fri Sep 30 04:05:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 04:06:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 04:06:40 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 04:06:40 2011] Initial guess for spatial extent in simple fitting = 0.82"
[Fri Sep 30 04:06:40 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.849
[Fri Sep 30 04:06:40 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.82"
[Fri Sep 30 04:06:42 2011] fullrun_ccd2_acisf11710_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 30 04:06:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11710_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 04:06:42 2011] fullrun_ccd2_acisf11710_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 30 04:06:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11710_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 04:06:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11710_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11710_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 04:06:43 2011] fullrun_ccd2_acisf11710_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 30 04:06:43 2011] fullrun_ccd2_acisf11710_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 30 04:06:43 2011] Fit fullrun_ccd2_acisf11710_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 30 04:06:55 2011] Spatial fit model total counts = 89.857200, observed total counts = 91.000000
[Fri Sep 30 04:06:55 2011] Offset between fit and detection position for source 6 = 0.014183 pixels
[Fri Sep 30 04:06:55 2011] 90.521090 total counts/ 6.211190 bgd. counts: snr = 33.829156
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.014183 pixels
  Position = (602.1, 691.0) = 21 35 15.65 -1 8 24.5
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 84.3 +/- 9.5
  Background counts = 6.2
  Rate = 0.003 +/- 0.0004
[Fri Sep 30 04:06:55 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 04:06:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 04:06:55 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 04:06:55 2011] Source does appear to be extended
[Fri Sep 30 04:06:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 04:08:52 2011] Not overwriting source region fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src6_src.reg
[Fri Sep 30 04:08:52 2011] Extracting stamp from image fullrun_ccd2_acisf11710_pi14-548_cl_sm2.00.img.gz, (563, 652) - (641, 730)
[Fri Sep 30 04:08:52 2011] Writing fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src6.gif
[Fri Sep 30 04:08:56 2011] ../../acisf11710/products/events/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src6_src.evt and ../../acisf11710/products/events/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Fri Sep 30 04:08:56 2011] Size of ../../acisf11710/products/events/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src6_src.evt.gz[events] = 90 counts
[Fri Sep 30 04:08:56 2011] Mean chipx,y = (482.36, 608.51)
[Fri Sep 30 04:08:56 2011] Mean tdetx,y = (3669.51, 3603.64)
[Fri Sep 30 04:08:56 2011] chipx,y range = (461.00-498.00, 589.00-629.00)
[Fri Sep 30 04:08:56 2011] Size of ../../acisf11710/products/events/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 15 counts
[Fri Sep 30 04:08:56 2011] ../../acisf11710/products/images/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src6_src.img and ../../acisf11710/products/images/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Fri Sep 30 04:08:56 2011] ../../acisf11710/products/spectra/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src6_src.pi and ../../acisf11710/products/spectra/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Fri Sep 30 04:08:56 2011] Not generating rmf since there are only 84 counts
[Fri Sep 30 04:08:58 2011] ../../acisf11710/products/lightcurves/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src6_src.lc and ../../acisf11710/products/lightcurves/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Fri Sep 30 04:09:52 2011] 185.741
[Fri Sep 30 04:12:02 2011] Updating aperture counts using extracted products
[Fri Sep 30 04:12:02 2011] Error reading totcts from fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src6_src.pi.gz
[Fri Sep 30 04:12:02 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 04:12:02 2011] Using photon index=1.80, rate=0.00316, arf fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src6.arf
[Fri Sep 30 04:12:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 04:12:02 2011] Updating source flux to 3.9e-14
[Fri Sep 30 04:12:11 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep 30 04:12:12 2011] acisf11710/analysis//spectral/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete