[Fri Sep 30 04:03:57 2011] Detection parameters:
  Position = (1030.8, 1000.6) = 21 35 1.57 -1 5 51.9
  Extent = 0.5" x 0.5", rotation angle = 5 degrees
  Source counts = 40.2 +/- 6.4
  Background counts = 0.8
  Rate = 0.002 +/- 0.0002

[Fri Sep 30 04:03:58 2011] Off-axis axis estimate = 2.60'
[Fri Sep 30 04:05:31 2011] Using EEF radius (= 0.51 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 04:05:31 2011] Initial guess for spatial extent in simple fitting = 0.51"
[Fri Sep 30 04:05:31 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.960
[Fri Sep 30 04:05:31 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 0.51"
[Fri Sep 30 04:05:32 2011] fullrun_ccd2_acisf11710_pi14-548_cl_pass0_src4.ximg exists
[Fri Sep 30 04:05:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11710_pi14-548_cl_pass0_src4.csv
[Fri Sep 30 04:05:32 2011] fullrun_ccd2_acisf11710_pi14-548_cl_pass0_src4_1.ximg exists
[Fri Sep 30 04:05:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11710_pi14-548_cl_pass0_src4.csv
[Fri Sep 30 04:05:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11710_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11710_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 04:05:33 2011] fullrun_ccd2_acisf11710_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Fri Sep 30 04:05:33 2011] fullrun_ccd2_acisf11710_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Sep 30 04:05:33 2011] Fit fullrun_ccd2_acisf11710_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Sep 30 04:05:57 2011] Spatial fit model total counts = 55.390900, observed total counts = 55.000000
[Fri Sep 30 04:05:57 2011] Offset between fit and detection position for source 4 = 0.728119 pixels
[Fri Sep 30 04:05:57 2011] 58.266500 total counts/ 15.000100 bgd. counts: snr = 11.171299
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.728119 pixels
  Position = (1031.4, 1000.9) = 21 35 1.56 -1 5 52.0
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 43.3 +/- 7.6
  Background counts = 15.0
  Rate = 0.002 +/- 0.0003
[Fri Sep 30 04:05:57 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 04:05:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 04:05:57 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 04:05:57 2011] Source does appear to be extended
[Fri Sep 30 04:05:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 04:06:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 04:06:40 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Fri Sep 30 04:06:40 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.761
[Fri Sep 30 04:06:40 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 0.44"
[Fri Sep 30 04:06:43 2011] fullrun_ccd2_acisf11710_pi14-548_cl_pass1_src4.ximg exists
[Fri Sep 30 04:06:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11710_pi14-548_cl_pass1_src4.csv
[Fri Sep 30 04:06:43 2011] fullrun_ccd2_acisf11710_pi14-548_cl_pass1_src4_1.ximg exists
[Fri Sep 30 04:06:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11710_pi14-548_cl_pass1_src4.csv
[Fri Sep 30 04:06:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11710_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11710_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 04:06:43 2011] fullrun_ccd2_acisf11710_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Fri Sep 30 04:06:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11710_pi14-548_cl_pass1_tfrozen_src4.csv
[Fri Sep 30 04:06:43 2011] fullrun_ccd2_acisf11710_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Sep 30 04:06:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11710_pi14-548_cl_pass1_tfrozen_src4.csv
[Fri Sep 30 04:06:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11710_pi14-548_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11710_pi14-548_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 04:06:55 2011] Source 4 is offset by -2.146059 and -0.551825 pixels which is larger than
2 X fitted extent = 0.772622 x 0.637880, not incorporating fit results
[Fri Sep 30 04:06:55 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 04:06:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 04:06:55 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 04:06:55 2011] Source does appear to be extended
[Fri Sep 30 04:06:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 04:08:52 2011] Not overwriting source region fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src4_src.reg
[Fri Sep 30 04:08:52 2011] Extracting stamp from image fullrun_ccd2_acisf11710_pi14-548_cl_sm2.00.img.gz, (1011, 981) - (1052, 1021)
[Fri Sep 30 04:08:52 2011] Writing fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src4.gif
[Fri Sep 30 04:09:05 2011] ../../acisf11710/products/events/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src4_src.evt and ../../acisf11710/products/events/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Fri Sep 30 04:09:05 2011] Size of ../../acisf11710/products/events/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src4_src.evt.gz[events] = 49 counts
[Fri Sep 30 04:09:05 2011] Mean chipx,y = (13.84, 840.84)
[Fri Sep 30 04:09:05 2011] Mean tdetx,y = (3901.84, 4072.16)
[Fri Sep 30 04:09:05 2011] chipx,y range = (4.00-21.00, 824.00-857.00)
[Fri Sep 30 04:09:05 2011] Size of ../../acisf11710/products/events/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 2 counts
[Fri Sep 30 04:09:05 2011] ../../acisf11710/products/images/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src4_src.img and ../../acisf11710/products/images/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Fri Sep 30 04:09:05 2011] ../../acisf11710/products/spectra/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src4_src.pi and ../../acisf11710/products/spectra/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Fri Sep 30 04:09:05 2011] Not generating rmf since there are only 43 counts
[Fri Sep 30 04:09:09 2011] ../../acisf11710/products/lightcurves/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src4_src.lc and ../../acisf11710/products/lightcurves/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Fri Sep 30 04:09:52 2011] 106.502
[Fri Sep 30 04:12:02 2011] Updating aperture counts using extracted products
[Fri Sep 30 04:12:02 2011] Error reading totcts from fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src4_src.pi.gz
[Fri Sep 30 04:12:02 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 04:12:02 2011] Using photon index=1.80, rate=0.00162, arf fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src4.arf
[Fri Sep 30 04:12:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 04:12:02 2011] Updating source flux to 3.5e-14
[Fri Sep 30 04:12:11 2011] Flag b found in src. 4 procflags, skipping spectral fitting
[Fri Sep 30 04:12:11 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep 30 04:12:12 2011] acisf11710/analysis//spectral/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete