[Fri Sep 30 04:03:58 2011] Detection parameters:
  Position = (267.6, 896.4) = 21 35 26.60 -1 6 43.2
  Extent = 0.8" x 0.5", rotation angle = 111 degrees
  Source counts = 13.9 +/- 3.9
  Background counts = 1.1
  Rate = 0.0005 +/- 0.0001

[Fri Sep 30 04:03:58 2011] Off-axis axis estimate = 4.57'
[Fri Sep 30 04:05:31 2011] Using EEF radius (= 1.02 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 04:05:31 2011] Initial guess for spatial extent in simple fitting = 1.02"
[Fri Sep 30 04:05:31 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.949
[Fri Sep 30 04:05:31 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 1.02"
[Fri Sep 30 04:05:33 2011] fullrun_ccd2_acisf11710_pi14-548_cl_pass0_src9.ximg exists
[Fri Sep 30 04:05:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11710_pi14-548_cl_pass0_src9.csv
[Fri Sep 30 04:05:33 2011] fullrun_ccd2_acisf11710_pi14-548_cl_pass0_src9_1.ximg exists
[Fri Sep 30 04:05:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11710_pi14-548_cl_pass0_src9.csv
[Fri Sep 30 04:05:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11710_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11710_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 04:05:33 2011] fullrun_ccd2_acisf11710_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Fri Sep 30 04:05:33 2011] fullrun_ccd2_acisf11710_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Sep 30 04:05:33 2011] Fit fullrun_ccd2_acisf11710_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Sep 30 04:05:57 2011] Spatial fit model total counts = 18.271500, observed total counts = 19.000000
[Fri Sep 30 04:05:57 2011] Offset between fit and detection position for source 14 = 0.832673 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.832673 pixels
  Position = (267.9, 895.6) = 21 35 26.61 -1 6 43.8
  Extent = 1.2 (0.4-1.6)", rotation angle = 0
  Source counts = 18.4 +/- 4.3
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0002
[Fri Sep 30 04:05:57 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 04:05:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 04:05:57 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 04:05:57 2011] Source does appear to be extended
[Fri Sep 30 04:05:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 04:06:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 04:06:40 2011] Initial guess for spatial extent in simple fitting = 1.17"
[Fri Sep 30 04:06:40 2011] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.902
[Fri Sep 30 04:06:40 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 1.17"
[Fri Sep 30 04:06:43 2011] fullrun_ccd2_acisf11710_pi14-548_cl_pass1_src9.ximg exists
[Fri Sep 30 04:06:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11710_pi14-548_cl_pass1_src9.csv
[Fri Sep 30 04:06:43 2011] fullrun_ccd2_acisf11710_pi14-548_cl_pass1_src9_1.ximg exists
[Fri Sep 30 04:06:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11710_pi14-548_cl_pass1_src9.csv
[Fri Sep 30 04:06:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11710_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11710_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 04:06:43 2011] fullrun_ccd2_acisf11710_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Fri Sep 30 04:06:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11710_pi14-548_cl_pass1_tfrozen_src9.csv
[Fri Sep 30 04:06:43 2011] fullrun_ccd2_acisf11710_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Sep 30 04:06:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11710_pi14-548_cl_pass1_tfrozen_src9.csv
[Fri Sep 30 04:06:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11710_pi14-548_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11710_pi14-548_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 04:06:55 2011] Spatial fit model total counts = 17.287100, observed total counts = 19.000000
[Fri Sep 30 04:06:55 2011] Offset between fit and detection position for source 14 = 0.356498 pixels
[Fri Sep 30 04:06:55 2011] 17.500387 total counts/ 0.068087 bgd. counts: snr = 66.806948
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.356498 pixels
  Position = (268.1, 895.3) = 21 35 26.61 -1 6 44.0
  Extent = 1.1 (0.4-1.6)", rotation angle = 0
  Source counts = 17.4 +/- 4.2
  Background counts = 0.1
  Rate = 0.0007 +/- 0.0002
[Fri Sep 30 04:06:55 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 04:06:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 04:06:55 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 04:06:55 2011] Source does appear to be extended
[Fri Sep 30 04:06:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 04:08:53 2011] Not overwriting source region fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src14_src.reg
[Fri Sep 30 04:08:53 2011] Extracting stamp from image fullrun_ccd2_acisf11710_pi14-548_cl_sm2.00.img.gz, (219, 846) - (317, 945)
[Fri Sep 30 04:08:53 2011] Writing fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src14.gif
[Fri Sep 30 04:09:24 2011] ../../acisf11710/products/events/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src14_src.evt and ../../acisf11710/products/events/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src14_bgd.evt exist, delete to re-create
[Fri Sep 30 04:09:24 2011] Size of ../../acisf11710/products/events/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src14_src.evt.gz[events] = 18 counts
[Fri Sep 30 04:09:24 2011] Mean chipx,y = (771.56, 863.39)
[Fri Sep 30 04:09:24 2011] Mean tdetx,y = (3924.39, 3314.44)
[Fri Sep 30 04:09:24 2011] chipx,y range = (756.00-793.00, 851.00-880.00)
[Fri Sep 30 04:09:24 2011] Size of ../../acisf11710/products/events/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 29 counts
[Fri Sep 30 04:09:24 2011] ../../acisf11710/products/images/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src14_src.img and ../../acisf11710/products/images/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src14_bgd.img exist, delete to re-create
[Fri Sep 30 04:09:24 2011] ../../acisf11710/products/spectra/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src14_src.pi and ../../acisf11710/products/spectra/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src14_bgd.pi exist, delete to re-create
[Fri Sep 30 04:09:24 2011] Not generating rmf since there are only 17 counts
[Fri Sep 30 04:09:27 2011] ../../acisf11710/products/lightcurves/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src14_src.lc and ../../acisf11710/products/lightcurves/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src14_bgd.lc exist, delete to re-create
[Fri Sep 30 04:09:52 2011] 173.613
[Fri Sep 30 04:12:02 2011] Updating aperture counts using extracted products
[Fri Sep 30 04:12:02 2011] Error reading totcts from fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src14_src.pi.gz
[Fri Sep 30 04:12:02 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 04:12:02 2011] Using photon index=1.80, rate=0.000653, arf fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src14.arf
[Fri Sep 30 04:12:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 04:12:02 2011] Updating source flux to 8.7e-15
[Fri Sep 30 04:12:11 2011] Source 14 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep 30 04:12:12 2011] acisf11710/analysis//spectral/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete