[Fri Sep 30 04:03:56 2011] Detection parameters:
  Position = (450.7, 761.3) = 21 35 20.60 -1 7 49.6
  Extent = 1.0" x 0.5", rotation angle = 21 degrees
  Source counts = 23.0 +/- 4.9
  Background counts = 1.0
  Rate = 0.0009 +/- 0.0002

[Fri Sep 30 04:03:58 2011] Off-axis axis estimate = 4.13'
[Fri Sep 30 04:05:31 2011] Using EEF radius (= 0.87 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 04:05:31 2011] Initial guess for spatial extent in simple fitting = 0.87"
[Fri Sep 30 04:05:31 2011] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.212
[Fri Sep 30 04:05:31 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.87"
[Fri Sep 30 04:05:32 2011] fullrun_ccd2_acisf11710_pi14-548_cl_pass0_src5.ximg exists
[Fri Sep 30 04:05:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11710_pi14-548_cl_pass0_src5.csv
[Fri Sep 30 04:05:32 2011] fullrun_ccd2_acisf11710_pi14-548_cl_pass0_src5_1.ximg exists
[Fri Sep 30 04:05:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11710_pi14-548_cl_pass0_src5.csv
[Fri Sep 30 04:05:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11710_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11710_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 04:05:33 2011] fullrun_ccd2_acisf11710_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Fri Sep 30 04:05:33 2011] fullrun_ccd2_acisf11710_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Sep 30 04:05:33 2011] Fit fullrun_ccd2_acisf11710_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Sep 30 04:05:57 2011] Spatial fit model total counts = 24.289100, observed total counts = 26.000000
[Fri Sep 30 04:05:57 2011] Offset between fit and detection position for source 1 = 0.468894 pixels
[Fri Sep 30 04:05:57 2011] 24.798460 total counts/ 2.409660 bgd. counts: snr = 14.422911
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.468894 pixels
  Position = (450.8, 761.8) = 21 35 20.61 -1 7 49.6
  Extent = 1.0 (0.6-1.4)", rotation angle = 0
  Source counts = 22.4 +/- 5.0
  Background counts = 2.4
  Rate = 0.0008 +/- 0.0002
[Fri Sep 30 04:05:57 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 04:05:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 04:05:57 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 04:05:57 2011] Source does appear to be extended
[Fri Sep 30 04:05:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 04:06:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 04:06:40 2011] Initial guess for spatial extent in simple fitting = 0.97"
[Fri Sep 30 04:06:40 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.028
[Fri Sep 30 04:06:40 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.97"
[Fri Sep 30 04:06:43 2011] fullrun_ccd2_acisf11710_pi14-548_cl_pass1_src5.ximg exists
[Fri Sep 30 04:06:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11710_pi14-548_cl_pass1_src5.csv
[Fri Sep 30 04:06:43 2011] fullrun_ccd2_acisf11710_pi14-548_cl_pass1_src5_1.ximg exists
[Fri Sep 30 04:06:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11710_pi14-548_cl_pass1_src5.csv
[Fri Sep 30 04:06:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11710_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11710_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 04:06:43 2011] fullrun_ccd2_acisf11710_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Fri Sep 30 04:06:43 2011] fullrun_ccd2_acisf11710_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Sep 30 04:06:43 2011] Fit fullrun_ccd2_acisf11710_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Sep 30 04:06:55 2011] Spatial fit model total counts = 24.990800, observed total counts = 26.000000
[Fri Sep 30 04:06:55 2011] Offset between fit and detection position for source 1 = 0.163297 pixels
[Fri Sep 30 04:06:55 2011] 25.755660 total counts/ 3.982560 bgd. counts: snr = 10.910361
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.163297 pixels
  Position = (450.6, 761.7) = 21 35 20.62 -1 7 49.7
  Extent = 0.9 (0.6-1.3)", rotation angle = 0
  Source counts = 21.8 +/- 5.1
  Background counts = 4.0
  Rate = 0.0008 +/- 0.0002
[Fri Sep 30 04:06:55 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 04:06:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 04:06:55 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 04:06:55 2011] Source does appear to be extended
[Fri Sep 30 04:06:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 04:08:52 2011] Not overwriting source region fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src1_src.reg
[Fri Sep 30 04:08:52 2011] Extracting stamp from image fullrun_ccd2_acisf11710_pi14-548_cl_sm2.00.img.gz, (409, 720) - (492, 804)
[Fri Sep 30 04:08:52 2011] Writing fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src1.gif
[Fri Sep 30 04:09:09 2011] ../../acisf11710/products/events/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src1_src.evt and ../../acisf11710/products/events/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Sep 30 04:09:09 2011] Size of ../../acisf11710/products/events/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src1_src.evt.gz[events] = 25 counts
[Fri Sep 30 04:09:09 2011] Mean chipx,y = (616.64, 704.44)
[Fri Sep 30 04:09:09 2011] Mean tdetx,y = (3765.44, 3469.36)
[Fri Sep 30 04:09:09 2011] chipx,y range = (601.00-634.00, 688.00-721.00)
[Fri Sep 30 04:09:10 2011] Size of ../../acisf11710/products/events/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 18 counts
[Fri Sep 30 04:09:10 2011] ../../acisf11710/products/images/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src1_src.img and ../../acisf11710/products/images/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Sep 30 04:09:10 2011] ../../acisf11710/products/spectra/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src1_src.pi and ../../acisf11710/products/spectra/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Sep 30 04:09:10 2011] Not generating rmf since there are only 21 counts
[Fri Sep 30 04:09:13 2011] ../../acisf11710/products/lightcurves/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src1_src.lc and ../../acisf11710/products/lightcurves/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Sep 30 04:09:52 2011] 173.298
[Fri Sep 30 04:12:02 2011] Updating aperture counts using extracted products
[Fri Sep 30 04:12:02 2011] Error reading totcts from fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Sep 30 04:12:02 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 04:12:02 2011] Using photon index=1.80, rate=0.000816, arf fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src1.arf
[Fri Sep 30 04:12:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 04:12:02 2011] Updating source flux to 1.1e-14
[Fri Sep 30 04:12:11 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep 30 04:12:12 2011] acisf11710/analysis//spectral/fullrun_ccd2_acisf11710_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete