[Fri Sep 30 04:03:54 2011] Detection parameters:
  Position = (379.6, 323.8) = 21 34 55.41 -1 1 33.0
  Extent = 0.7" x 0.6", rotation angle = 29 degrees
  Source counts = 111.1 +/- 10.6
  Background counts = 1.9
  Rate = 0.004 +/- 0.0004

[Fri Sep 30 04:03:55 2011] Off-axis axis estimate = 4.82'
[Fri Sep 30 04:05:30 2011] Using EEF radius (= 1.11 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 04:05:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 04:05:30 2011] Initial guess for spatial extent in simple fitting = 1.11"
[Fri Sep 30 04:05:30 2011] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.986
[Fri Sep 30 04:05:30 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.11"
[Fri Sep 30 04:05:30 2011] fullrun_ccd1_acisf11710_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 30 04:05:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11710_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 04:05:30 2011] fullrun_ccd1_acisf11710_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 30 04:05:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11710_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 04:05:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11710_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11710_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 04:05:31 2011] fullrun_ccd1_acisf11710_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 30 04:05:31 2011] fullrun_ccd1_acisf11710_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 30 04:05:31 2011] Fit fullrun_ccd1_acisf11710_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 30 04:05:55 2011] Spatial fit model total counts = 111.548000, observed total counts = 119.000000
[Fri Sep 30 04:05:55 2011] Offset between fit and detection position for source 1 = 0.663611 pixels
[Fri Sep 30 04:05:55 2011] 112.931422 total counts/ 0.000422 bgd. counts: snr = 5494.557378
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.663611 pixels
  Position = (380.0, 324.3) = 21 34 55.41 -1 1 33.0
  Extent = 0.9 (0.8-1.0)", rotation angle = 0
  Source counts = 112.9 +/- 10.6
  Background counts = 0.0
  Rate = 0.004 +/- 0.0004
[Fri Sep 30 04:05:55 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 04:05:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 04:05:55 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 04:05:55 2011] Source does appear to be extended
[Fri Sep 30 04:05:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 04:06:33 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 04:06:33 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 04:06:33 2011] Initial guess for spatial extent in simple fitting = 0.87"
[Fri Sep 30 04:06:33 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.970
[Fri Sep 30 04:06:33 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.87"
[Fri Sep 30 04:06:36 2011] fullrun_ccd1_acisf11710_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 30 04:06:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11710_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 04:06:36 2011] fullrun_ccd1_acisf11710_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 30 04:06:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11710_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 04:06:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11710_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11710_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 04:06:40 2011] fullrun_ccd1_acisf11710_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 30 04:06:40 2011] fullrun_ccd1_acisf11710_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 30 04:06:40 2011] Fit fullrun_ccd1_acisf11710_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 30 04:06:53 2011] Spatial fit model total counts = 115.315000, observed total counts = 119.000000
[Fri Sep 30 04:06:53 2011] Offset between fit and detection position for source 1 = 0.017245 pixels
[Fri Sep 30 04:06:53 2011] 116.333650 total counts/ 2.639650 bgd. counts: snr = 69.978459
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.017245 pixels
  Position = (380.1, 324.3) = 21 34 55.41 -1 1 33.0
  Extent = 0.9 (0.8-1.0)", rotation angle = 0
  Source counts = 113.7 +/- 10.8
  Background counts = 2.6
  Rate = 0.004 +/- 0.0004
[Fri Sep 30 04:06:53 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 04:06:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 04:06:53 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 04:06:53 2011] Source does appear to be extended
[Fri Sep 30 04:06:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 04:07:55 2011] Not overwriting source region fullrun_ccd1_acisf11710_pi14-548_pass1_cl_src1_src.reg
[Fri Sep 30 04:07:55 2011] Extracting stamp from image fullrun_ccd1_acisf11710_pi14-548_cl_sm2.00.img.gz, (340, 284) - (420, 364)
[Fri Sep 30 04:07:55 2011] Writing fullrun_ccd1_acisf11710_pi14-548_pass1_cl_src1.gif
[Fri Sep 30 04:07:57 2011] ../../acisf11710/products/events/fullrun_ccd1_acisf11710_pi14-548_pass1_cl_src1_src.evt and ../../acisf11710/products/events/fullrun_ccd1_acisf11710_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Sep 30 04:07:57 2011] Size of ../../acisf11710/products/events/fullrun_ccd1_acisf11710_pi14-548_pass1_cl_src1_src.evt.gz[events] = 117 counts
[Fri Sep 30 04:07:57 2011] Mean chipx,y = (249.98, 742.72)
[Fri Sep 30 04:07:57 2011] Mean tdetx,y = (4389.28, 4356.98)
[Fri Sep 30 04:07:57 2011] chipx,y range = (229.00-270.00, 723.00-760.00)
[Fri Sep 30 04:07:57 2011] Size of ../../acisf11710/products/events/fullrun_ccd1_acisf11710_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 16 counts
[Fri Sep 30 04:07:57 2011] ../../acisf11710/products/images/fullrun_ccd1_acisf11710_pi14-548_pass1_cl_src1_src.img and ../../acisf11710/products/images/fullrun_ccd1_acisf11710_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Sep 30 04:07:57 2011] ../../acisf11710/products/spectra/fullrun_ccd1_acisf11710_pi14-548_pass1_cl_src1_src.pi and ../../acisf11710/products/spectra/fullrun_ccd1_acisf11710_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Sep 30 04:08:02 2011] ../../acisf11710/products/lightcurves/fullrun_ccd1_acisf11710_pi14-548_pass1_cl_src1_src.lc and ../../acisf11710/products/lightcurves/fullrun_ccd1_acisf11710_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Sep 30 04:08:52 2011] Keeping rmf generated by specextract
[Fri Sep 30 04:08:52 2011] 184.72
[Fri Sep 30 04:12:02 2011] Updating aperture counts using extracted products
[Fri Sep 30 04:12:02 2011] Error reading totcts from fullrun_ccd1_acisf11710_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Sep 30 04:12:02 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 04:12:02 2011] Using photon index=1.80, rate=0.00426, arf fullrun_ccd1_acisf11710_pi14-548_pass1_cl_src1.arf
[Fri Sep 30 04:12:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 04:12:02 2011] Updating source flux to 5.3e-14
[Fri Sep 30 04:12:11 2011] Reading fit data from acisf11710/analysis//spectral/fullrun_ccd1_acisf11710_pi14-548_pass1_cl_src1_pl.csv
[Fri Sep 30 04:12:11 2011] Spectral fit parameter nH value = 1.4896e+21
[Fri Sep 30 04:12:11 2011] Spectral fit parameter PhoIndex value = 1.76572
[Fri Sep 30 04:12:11 2011] Failed to get F(0.3-8.0) from acisf11710/analysis//spectral/fullrun_ccd1_acisf11710_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Sep 30 04:12:11 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 04:12:11 2011] Using Nh = 1.5e+21, photon index=1.77, rate=0.00426, arf fullrun_ccd1_acisf11710_pi14-548_pass1_cl_src1.arf
[Fri Sep 30 04:12:11 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 04:12:11 2011] Updating source flux to 5.2e-14