[Fri Sep 30 12:11:19 2011] Detection parameters:
  Position = (463.4, 39.7) = 17 44 16.86 32 54 33.0
  Extent = 0.7" x 0.5", rotation angle = 85 degrees
  Source counts = 68.6 +/- 8.6
  Background counts = 5.4
  Rate = 0.002 +/- 0.0002

[Fri Sep 30 12:11:19 2011] Off-axis axis estimate = 4.34'
[Fri Sep 30 12:12:59 2011] Using EEF radius (= 0.94 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 12:12:59 2011] Initial guess for spatial extent in simple fitting = 0.94"
[Fri Sep 30 12:12:59 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.077
[Fri Sep 30 12:12:59 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.94"
[Fri Sep 30 12:13:00 2011] fullrun_ccd7_acisf11708_pi14-548_cl_pass0_src10.ximg exists
[Fri Sep 30 12:13:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11708_pi14-548_cl_pass0_src10.csv
[Fri Sep 30 12:13:00 2011] fullrun_ccd7_acisf11708_pi14-548_cl_pass0_src10_1.ximg exists
[Fri Sep 30 12:13:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11708_pi14-548_cl_pass0_src10.csv
[Fri Sep 30 12:13:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11708_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11708_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 12:13:02 2011] fullrun_ccd7_acisf11708_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Fri Sep 30 12:13:02 2011] fullrun_ccd7_acisf11708_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Sep 30 12:13:02 2011] Fit fullrun_ccd7_acisf11708_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Sep 30 12:13:18 2011] Spatial fit model total counts = 69.843000, observed total counts = 74.000000
[Fri Sep 30 12:13:18 2011] Offset between fit and detection position for source 31 = 0.971091 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.971091 pixels
  Position = (464.4, 39.5) = 17 44 16.85 32 54 32.7
  Extent = 1.2 (1.0-1.4)", rotation angle = 0
  Source counts = 72.4 +/- 8.5
  Background counts = 0.0
  Rate = 0.002 +/- 0.0002
[Fri Sep 30 12:13:18 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 12:13:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 12:13:18 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 12:13:18 2011] Source does appear to be extended
[Fri Sep 30 12:13:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 12:13:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 12:13:39 2011] Initial guess for spatial extent in simple fitting = 1.20"
[Fri Sep 30 12:13:39 2011] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.871
[Fri Sep 30 12:13:39 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 1.20"
[Fri Sep 30 12:13:40 2011] fullrun_ccd7_acisf11708_pi14-548_cl_pass1_src10.ximg exists
[Fri Sep 30 12:13:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11708_pi14-548_cl_pass1_src10.csv
[Fri Sep 30 12:13:40 2011] fullrun_ccd7_acisf11708_pi14-548_cl_pass1_src10_1.ximg exists
[Fri Sep 30 12:13:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11708_pi14-548_cl_pass1_src10.csv
[Fri Sep 30 12:13:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11708_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11708_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 12:13:40 2011] fullrun_ccd7_acisf11708_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Fri Sep 30 12:13:40 2011] fullrun_ccd7_acisf11708_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Sep 30 12:13:40 2011] Fit fullrun_ccd7_acisf11708_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Fri Sep 30 12:13:50 2011] Spatial fit model total counts = 70.938900, observed total counts = 75.000000
[Fri Sep 30 12:13:50 2011] Offset between fit and detection position for source 31 = 0.033457 pixels
[Fri Sep 30 12:13:50 2011] 73.497980 total counts/ 0.000780 bgd. counts: snr = 2631.677577
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.033457 pixels
  Position = (464.4, 39.5) = 17 44 16.85 32 54 32.7
  Extent = 1.2 (1.0-1.4)", rotation angle = 0
  Source counts = 73.5 +/- 8.6
  Background counts = 0.0
  Rate = 0.002 +/- 0.0002
[Fri Sep 30 12:13:50 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 12:13:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 12:13:50 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 12:13:50 2011] Source does appear to be extended
[Fri Sep 30 12:13:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 12:16:57 2011] Not overwriting source region fullrun_ccd7_acisf11708_pi14-548_pass1_cl_src31_src.reg
[Fri Sep 30 12:16:57 2011] Extracting stamp from image fullrun_ccd7_acisf11708_pi14-548_cl_sm2.00.img.gz, (410, 0) - (519, 94)
[Fri Sep 30 12:16:57 2011] Writing fullrun_ccd7_acisf11708_pi14-548_pass1_cl_src31.gif
[Fri Sep 30 12:17:42 2011] ../../acisf11708/products/events/fullrun_ccd7_acisf11708_pi14-548_pass1_cl_src31_src.evt and ../../acisf11708/products/events/fullrun_ccd7_acisf11708_pi14-548_pass1_cl_src31_bgd.evt exist, delete to re-create
[Fri Sep 30 12:17:43 2011] Size of ../../acisf11708/products/events/fullrun_ccd7_acisf11708_pi14-548_pass1_cl_src31_src.evt.gz[events] = 79 counts
[Fri Sep 30 12:17:43 2011] Mean chipx,y = (23.92, 999.92)
[Fri Sep 30 12:17:43 2011] Mean tdetx,y = (3940.92, 2701.92)
[Fri Sep 30 12:17:43 2011] chipx,y range = (3.00-46.00, 978.00-1021.00)
[Fri Sep 30 12:17:43 2011] Size of ../../acisf11708/products/events/fullrun_ccd7_acisf11708_pi14-548_pass1_cl_src31_bgd.evt.gz[events] = 72 counts
[Fri Sep 30 12:17:43 2011] ../../acisf11708/products/images/fullrun_ccd7_acisf11708_pi14-548_pass1_cl_src31_src.img and ../../acisf11708/products/images/fullrun_ccd7_acisf11708_pi14-548_pass1_cl_src31_bgd.img exist, delete to re-create
[Fri Sep 30 12:17:43 2011] ../../acisf11708/products/spectra/fullrun_ccd7_acisf11708_pi14-548_pass1_cl_src31_src.pi and ../../acisf11708/products/spectra/fullrun_ccd7_acisf11708_pi14-548_pass1_cl_src31_bgd.pi exist, delete to re-create
[Fri Sep 30 12:17:43 2011] Not generating rmf since there are only 73 counts
[Fri Sep 30 12:17:50 2011] ../../acisf11708/products/lightcurves/fullrun_ccd7_acisf11708_pi14-548_pass1_cl_src31_src.lc and ../../acisf11708/products/lightcurves/fullrun_ccd7_acisf11708_pi14-548_pass1_cl_src31_bgd.lc exist, delete to re-create
[Fri Sep 30 12:18:15 2011] 205.213
[Fri Sep 30 12:18:20 2011] Updating aperture counts using extracted products
[Fri Sep 30 12:18:20 2011] Error reading totcts from fullrun_ccd7_acisf11708_pi14-548_pass1_cl_src31_src.pi.gz
[Fri Sep 30 12:18:20 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 12:18:20 2011] Using photon index=1.80, rate=0.00162, arf fullrun_ccd7_acisf11708_pi14-548_pass1_cl_src31.arf
[Fri Sep 30 12:18:20 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 12:18:20 2011] Updating source flux to 1.5e-14
[Fri Sep 30 12:18:33 2011] Source 31 has fewer than 100.000000 counts, skipping spectral fitting