[Fri Sep 23 13:56:31 2011] Detection parameters:
  Position = (495.6, 63.2) = 16 13 44.89 28 30 14.3
  Extent = 1.0" x 0.7", rotation angle = 156 degrees
  Source counts = 224.9 +/- 15.1
  Background counts = 3.1
  Rate = 0.05 +/- 0.003

[Fri Sep 23 13:56:31 2011] Off-axis axis estimate = 4.88'
[Fri Sep 23 13:57:20 2011] Using EEF radius (= 1.13 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 13:57:20 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 13:57:20 2011] Initial guess for spatial extent in simple fitting = 1.13"
[Fri Sep 23 13:57:20 2011] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.953
[Fri Sep 23 13:57:20 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.13"
[Fri Sep 23 13:57:20 2011] fullrun_ccd7_acisf11700_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 23 13:57:20 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf11700_pi14-548_cl_pass0_src1.csv
[Fri Sep 23 13:57:20 2011] fullrun_ccd7_acisf11700_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 23 13:57:20 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf11700_pi14-548_cl_pass0_src1.csv
[Fri Sep 23 13:57:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11700_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11700_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 13:57:21 2011] fullrun_ccd7_acisf11700_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 23 13:57:21 2011] fullrun_ccd7_acisf11700_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 23 13:57:21 2011] Fit fullrun_ccd7_acisf11700_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 23 13:57:27 2011] Spatial fit model total counts = 226.043000, observed total counts = 228.000000
[Fri Sep 23 13:57:27 2011] Offset between fit and detection position for source 10 = 0.758274 pixels
[Fri Sep 23 13:57:27 2011] 227.782270 total counts/ 3.191270 bgd. counts: snr = 125.721795
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.758274 pixels
  Position = (496.1, 63.7) = 16 13 44.89 28 30 14.3
  Extent = 1.3 (1.2-1.4)", rotation angle = 0
  Source counts = 224.6 +/- 15.1
  Background counts = 3.2
  Rate = 0.05 +/- 0.003
[Fri Sep 23 13:57:27 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 13:57:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 13:57:27 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 13:57:27 2011] Source does appear to be extended
[Fri Sep 23 13:57:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 13:57:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 13:57:43 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 13:57:43 2011] Initial guess for spatial extent in simple fitting = 1.33"
[Fri Sep 23 13:57:43 2011] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.878
[Fri Sep 23 13:57:43 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.33"
[Fri Sep 23 13:57:43 2011] fullrun_ccd7_acisf11700_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 23 13:57:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11700_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 13:57:43 2011] fullrun_ccd7_acisf11700_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 23 13:57:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11700_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 13:57:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11700_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11700_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 13:57:44 2011] fullrun_ccd7_acisf11700_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 23 13:57:44 2011] fullrun_ccd7_acisf11700_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 23 13:57:44 2011] Fit fullrun_ccd7_acisf11700_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 23 13:57:53 2011] Spatial fit model total counts = 227.073000, observed total counts = 228.000000
[Fri Sep 23 13:57:53 2011] Offset between fit and detection position for source 10 = 0.091425 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.091425 pixels
  Position = (496.1, 63.8) = 16 13 44.89 28 30 14.3
  Extent = 1.3 (1.3-1.5)", rotation angle = 0
  Source counts = 227.3 +/- 15.1
  Background counts = 0.0
  Rate = 0.05 +/- 0.003
[Fri Sep 23 13:57:53 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 13:57:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 13:57:53 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 13:57:53 2011] Source does appear to be extended
[Fri Sep 23 13:57:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 14:03:10 2011] Not overwriting source region fullrun_ccd7_acisf11700_pi14-548_pass1_cl_src10_src.reg
[Fri Sep 23 14:03:10 2011] Extracting stamp from image fullrun_ccd7_acisf11700_pi14-548_cl_sm2.00.img.gz, (435, 2) - (558, 125)
[Fri Sep 23 14:03:10 2011] Writing fullrun_ccd7_acisf11700_pi14-548_pass1_cl_src10.gif
[Fri Sep 23 14:03:10 2011] ../../acisf11700/products/events/fullrun_ccd7_acisf11700_pi14-548_pass1_cl_src10_src.evt and ../../acisf11700/products/events/fullrun_ccd7_acisf11700_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Fri Sep 23 14:03:10 2011] Size of ../../acisf11700/products/events/fullrun_ccd7_acisf11700_pi14-548_pass1_cl_src10_src.evt.gz[events] = 228 counts
[Fri Sep 23 14:03:10 2011] Mean chipx,y = (571.98, 43.86)
[Fri Sep 23 14:03:10 2011] Mean tdetx,y = (4488.98, 1745.86)
[Fri Sep 23 14:03:10 2011] chipx,y range = (549.00-595.00, 24.00-64.00)
[Fri Sep 23 14:03:10 2011] Size of ../../acisf11700/products/events/fullrun_ccd7_acisf11700_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 13 counts
[Fri Sep 23 14:03:10 2011] ../../acisf11700/products/images/fullrun_ccd7_acisf11700_pi14-548_pass1_cl_src10_src.img and ../../acisf11700/products/images/fullrun_ccd7_acisf11700_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Fri Sep 23 14:03:10 2011] rmf not found, will run specextract
[Fri Sep 23 14:03:10 2011] arf not found, will run specextract
[Fri Sep 23 14:03:18 2011] ../../acisf11700/products/spectra/fullrun_ccd7_acisf11700_pi14-548_pass1_cl_src10.warf not found
[Fri Sep 23 14:03:18 2011] ../../acisf11700/products/spectra/fullrun_ccd7_acisf11700_pi14-548_pass1_cl_src10.wrmf not found
[Fri Sep 23 14:03:18 2011] Removal of ../../acisf11700/products/spectra/fullrun_ccd7_acisf11700_pi14-548_pass1_cl_src10.soff failed
[Fri Sep 23 14:03:24 2011] ../../acisf11700/products/lightcurves/fullrun_ccd7_acisf11700_pi14-548_pass1_cl_src10_src.lc and ../../acisf11700/products/lightcurves/fullrun_ccd7_acisf11700_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Fri Sep 23 14:04:43 2011] Keeping rmf generated by specextract
[Fri Sep 23 14:04:43 2011] 211.689
[Fri Sep 23 14:04:45 2011] Updating aperture counts using extracted products
[Fri Sep 23 14:04:45 2011] Error reading totcts from fullrun_ccd7_acisf11700_pi14-548_pass1_cl_src10_src.pi.gz
[Fri Sep 23 14:04:45 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 14:04:45 2011] Using photon index=1.80, rate=0.0456, arf fullrun_ccd7_acisf11700_pi14-548_pass1_cl_src10.arf
[Fri Sep 23 14:04:45 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 14:04:45 2011] Updating source flux to 4.2e-13
[Fri Sep 23 14:04:54 2011] Reading fit data from acisf11700/analysis//spectral/fullrun_ccd7_acisf11700_pi14-548_pass1_cl_src10_pl.csv
[Fri Sep 23 14:04:54 2011] Spectral fit parameter nH value = 2.20828e+13
[Fri Sep 23 14:04:54 2011] Spectral fit parameter PhoIndex value = 1.82906
[Fri Sep 23 14:04:54 2011] Failed to get F(0.3-8.0) from acisf11700/analysis//spectral/fullrun_ccd7_acisf11700_pi14-548_pass1_cl_src10_pl.csv, possibly due to different flux energy range selected
[Fri Sep 23 14:04:54 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 14:04:54 2011] Using Nh = 2.2e+13, photon index=1.83, rate=0.0456, arf fullrun_ccd7_acisf11700_pi14-548_pass1_cl_src10.arf
[Fri Sep 23 14:04:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 14:04:54 2011] Updating source flux to 4.3e-13