[Mon Oct 17 00:16:13 2011] Detection parameters:
  Position = (694.1, 107.0) = 19 11 5.70 9 2 33.8
  Extent = 1.1" x 0.7", rotation angle = 162 degrees
  Source counts = 81.5 +/- 9.5
  Background counts = 9.5
  Rate = 0.002 +/- 0.0002

[Mon Oct 17 00:16:16 2011] Off-axis axis estimate = 3.69'
[Mon Oct 17 00:17:32 2011] Using EEF radius (= 0.74 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 00:17:32 2011] Initial guess for spatial extent in simple fitting = 0.74"
[Mon Oct 17 00:17:32 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.991
[Mon Oct 17 00:17:32 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 0.74"
[Mon Oct 17 00:17:35 2011] fullrun_ccd7_acisf00117_pi14-548_cl_pass0_src18.ximg exists
[Mon Oct 17 00:17:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00117_pi14-548_cl_pass0_src18.csv
[Mon Oct 17 00:17:35 2011] fullrun_ccd7_acisf00117_pi14-548_cl_pass0_src18_1.ximg exists
[Mon Oct 17 00:17:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00117_pi14-548_cl_pass0_src18.csv
[Mon Oct 17 00:17:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf00117_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf00117_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 00:17:39 2011] fullrun_ccd7_acisf00117_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Mon Oct 17 00:17:39 2011] fullrun_ccd7_acisf00117_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Mon Oct 17 00:17:39 2011] Fit fullrun_ccd7_acisf00117_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Mon Oct 17 00:17:58 2011] Spatial fit model total counts = 92.797500, observed total counts = 92.000000
[Mon Oct 17 00:17:58 2011] Offset between fit and detection position for source 4 = 0.600824 pixels
[Mon Oct 17 00:17:58 2011] 93.109800 total counts/ 11.047600 bgd. counts: snr = 24.689323
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.600824 pixels
  Position = (694.3, 107.6) = 19 11 5.71 9 2 33.9
  Extent = 1.0 (0.9-1.2)", rotation angle = 0
  Source counts = 82.1 +/- 9.6
  Background counts = 11.0
  Rate = 0.002 +/- 0.0002
[Mon Oct 17 00:17:58 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 00:17:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 00:17:58 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 00:17:58 2011] Source does appear to be extended
[Mon Oct 17 00:17:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 00:18:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 00:18:25 2011] Initial guess for spatial extent in simple fitting = 1.01"
[Mon Oct 17 00:18:25 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.965
[Mon Oct 17 00:18:25 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 1.01"
[Mon Oct 17 00:18:26 2011] fullrun_ccd7_acisf00117_pi14-548_cl_pass1_src13.ximg exists
[Mon Oct 17 00:18:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00117_pi14-548_cl_pass1_src13.csv
[Mon Oct 17 00:18:26 2011] fullrun_ccd7_acisf00117_pi14-548_cl_pass1_src13_1.ximg exists
[Mon Oct 17 00:18:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00117_pi14-548_cl_pass1_src13.csv
[Mon Oct 17 00:18:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf00117_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf00117_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 00:18:27 2011] fullrun_ccd7_acisf00117_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Mon Oct 17 00:18:27 2011] fullrun_ccd7_acisf00117_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Mon Oct 17 00:18:27 2011] Fit fullrun_ccd7_acisf00117_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Mon Oct 17 00:18:37 2011] Spatial fit model total counts = 91.988300, observed total counts = 92.000000
[Mon Oct 17 00:18:37 2011] Offset between fit and detection position for source 4 = 0.016739 pixels
[Mon Oct 17 00:18:37 2011] 92.259500 total counts/ 10.408600 bgd. counts: snr = 25.370399
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.016739 pixels
  Position = (694.3, 107.6) = 19 11 5.71 9 2 33.9
  Extent = 1.0 (0.9-1.2)", rotation angle = 0
  Source counts = 81.9 +/- 9.6
  Background counts = 10.4
  Rate = 0.002 +/- 0.0002
[Mon Oct 17 00:18:37 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 00:18:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 00:18:37 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 00:18:37 2011] Source does appear to be extended
[Mon Oct 17 00:18:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 00:19:28 2011] Not overwriting source region fullrun_ccd7_acisf00117_pi14-548_pass1_cl_src4_src.reg
[Mon Oct 17 00:19:28 2011] Extracting stamp from image fullrun_ccd7_acisf00117_pi14-548_cl_sm2.00.img.gz, (648, 61) - (741, 154)
[Mon Oct 17 00:19:28 2011] Writing fullrun_ccd7_acisf00117_pi14-548_pass1_cl_src4.gif
[Mon Oct 17 00:20:16 2011] ../../acisf00117/products/events/fullrun_ccd7_acisf00117_pi14-548_pass1_cl_src4_src.evt and ../../acisf00117/products/events/fullrun_ccd7_acisf00117_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Mon Oct 17 00:20:16 2011] Size of ../../acisf00117/products/events/fullrun_ccd7_acisf00117_pi14-548_pass1_cl_src4_src.evt.gz[events] = 90 counts
[Mon Oct 17 00:20:16 2011] Mean chipx,y = (344.16, 91.30)
[Mon Oct 17 00:20:16 2011] Mean tdetx,y = (4261.16, 1793.30)
[Mon Oct 17 00:20:16 2011] chipx,y range = (321.00-364.00, 71.00-107.00)
[Mon Oct 17 00:20:16 2011] Size of ../../acisf00117/products/events/fullrun_ccd7_acisf00117_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 150 counts
[Mon Oct 17 00:20:16 2011] ../../acisf00117/products/images/fullrun_ccd7_acisf00117_pi14-548_pass1_cl_src4_src.img and ../../acisf00117/products/images/fullrun_ccd7_acisf00117_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Mon Oct 17 00:20:16 2011] ../../acisf00117/products/spectra/fullrun_ccd7_acisf00117_pi14-548_pass1_cl_src4_src.pi and ../../acisf00117/products/spectra/fullrun_ccd7_acisf00117_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Mon Oct 17 00:20:16 2011] Not generating rmf since there are only 81 counts
[Mon Oct 17 00:20:18 2011] ../../acisf00117/products/lightcurves/fullrun_ccd7_acisf00117_pi14-548_pass1_cl_src4_src.lc and ../../acisf00117/products/lightcurves/fullrun_ccd7_acisf00117_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Mon Oct 17 00:21:38 2011] 234.909
[Mon Oct 17 00:21:42 2011] Updating aperture counts using extracted products
[Mon Oct 17 00:21:42 2011] Error reading totcts from fullrun_ccd7_acisf00117_pi14-548_pass1_cl_src4_src.pi.gz
[Mon Oct 17 00:21:42 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 00:21:42 2011] Using photon index=1.80, rate=0.00152, arf fullrun_ccd7_acisf00117_pi14-548_pass1_cl_src4.arf
[Mon Oct 17 00:21:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 00:21:42 2011] Updating source flux to 2.1e-14
[Mon Oct 17 00:21:54 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting