[Mon Oct 17 00:16:13 2011] Detection parameters:
  Position = (620.9, 601.5) = 19 11 8.14 9 6 37.1
  Extent = 1.1" x 1.1", rotation angle = 15 degrees
  Source counts = 463.5 +/- 30.0
  Background counts = 437.5
  Rate = 0.009 +/- 0.0006

[Mon Oct 17 00:16:16 2011] Off-axis axis estimate = 1.72'
[Mon Oct 17 00:17:32 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 00:17:32 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Mon Oct 17 00:17:32 2011] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.855
[Mon Oct 17 00:17:32 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.41"
[Mon Oct 17 00:17:33 2011] fullrun_ccd7_acisf00117_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 17 00:17:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00117_pi14-548_cl_pass0_src1.csv
[Mon Oct 17 00:17:33 2011] fullrun_ccd7_acisf00117_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 17 00:17:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00117_pi14-548_cl_pass0_src1.csv
[Mon Oct 17 00:17:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf00117_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf00117_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 00:17:39 2011] fullrun_ccd7_acisf00117_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 17 00:17:39 2011] fullrun_ccd7_acisf00117_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 17 00:17:39 2011] Fit fullrun_ccd7_acisf00117_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 17 00:17:58 2011] Spatial fit model total counts = 1178.590000, observed total counts = 1178.000000
[Mon Oct 17 00:17:58 2011] Offset between fit and detection position for source 1 = 2.871224 pixels
[Mon Oct 17 00:17:58 2011] 1177.862000 total counts/ 1020.410000 bgd. counts: snr = 4.929023
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.871224 pixels
  Position = (623.6, 602.2) = 19 11 8.06 9 6 37.2
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 157.5 +/- 34.3
  Background counts = 1020.4
  Rate = 0.003 +/- 0.0006
[Mon Oct 17 00:17:58 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 00:17:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 00:17:58 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 00:17:58 2011] Source does appear to be extended
[Mon Oct 17 00:17:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 00:18:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 00:18:25 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 17 00:18:25 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Mon Oct 17 00:18:25 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Mon Oct 17 00:18:25 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.50"
[Mon Oct 17 00:18:25 2011] fullrun_ccd7_acisf00117_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 17 00:18:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00117_pi14-548_cl_pass1_src1.csv
[Mon Oct 17 00:18:25 2011] fullrun_ccd7_acisf00117_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 17 00:18:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00117_pi14-548_cl_pass1_src1.csv
[Mon Oct 17 00:18:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf00117_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf00117_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 00:18:27 2011] fullrun_ccd7_acisf00117_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 17 00:18:27 2011] fullrun_ccd7_acisf00117_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 17 00:18:27 2011] Fit fullrun_ccd7_acisf00117_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 17 00:18:37 2011] Spatial fit model total counts = 2412.990000, observed total counts = 2413.000000
[Mon Oct 17 00:18:37 2011] Offset between fit and detection position for source 1 = 2.481852 pixels
[Mon Oct 17 00:18:37 2011] 2390.219000 total counts/ 1805.640000 bgd. counts: snr = 13.757123
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.481852 pixels
  Position = (625.6, 600.8) = 19 11 8.00 9 6 36.5
  Extent = 2.9 (2.6-3.0)", rotation angle = 0
  Source counts = 584.6 +/- 48.9
  Background counts = 1805.6
  Rate = 0.01 +/- 0.0009
[Mon Oct 17 00:18:37 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 00:18:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 00:18:37 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 00:18:37 2011] Source does appear to be extended
[Mon Oct 17 00:18:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 00:19:28 2011] Not overwriting source region fullrun_ccd7_acisf00117_pi14-548_pass1_cl_src1_src.reg
[Mon Oct 17 00:19:28 2011] Extracting stamp from image fullrun_ccd7_acisf00117_pi14-548_cl_sm2.00.img.gz, (495, 470) - (756, 732)
[Mon Oct 17 00:19:28 2011] Writing fullrun_ccd7_acisf00117_pi14-548_pass1_cl_src1.gif
[Mon Oct 17 00:19:30 2011] ../../acisf00117/products/events/fullrun_ccd7_acisf00117_pi14-548_pass1_cl_src1_src.evt and ../../acisf00117/products/events/fullrun_ccd7_acisf00117_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Oct 17 00:19:30 2011] Size of ../../acisf00117/products/events/fullrun_ccd7_acisf00117_pi14-548_pass1_cl_src1_src.evt.gz[events] = 5914 counts
[Mon Oct 17 00:19:30 2011] Mean chipx,y = (415.94, 580.98)
[Mon Oct 17 00:19:30 2011] Mean tdetx,y = (4332.94, 2282.98)
[Mon Oct 17 00:19:30 2011] chipx,y range = (377.00-456.00, 545.00-622.00)
[Mon Oct 17 00:19:30 2011] Size of ../../acisf00117/products/events/fullrun_ccd7_acisf00117_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 33800 counts
[Mon Oct 17 00:19:30 2011] ../../acisf00117/products/images/fullrun_ccd7_acisf00117_pi14-548_pass1_cl_src1_src.img and ../../acisf00117/products/images/fullrun_ccd7_acisf00117_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Oct 17 00:19:30 2011] ../../acisf00117/products/spectra/fullrun_ccd7_acisf00117_pi14-548_pass1_cl_src1_src.pi and ../../acisf00117/products/spectra/fullrun_ccd7_acisf00117_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Oct 17 00:19:37 2011] ../../acisf00117/products/lightcurves/fullrun_ccd7_acisf00117_pi14-548_pass1_cl_src1_src.lc and ../../acisf00117/products/lightcurves/fullrun_ccd7_acisf00117_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Oct 17 00:21:38 2011] Keeping rmf generated by specextract
[Mon Oct 17 00:21:38 2011] 246.592
[Mon Oct 17 00:21:42 2011] Updating aperture counts using extracted products
[Mon Oct 17 00:21:42 2011] Error reading totcts from fullrun_ccd7_acisf00117_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Oct 17 00:21:42 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 00:21:42 2011] Using photon index=1.80, rate=0.0109, arf fullrun_ccd7_acisf00117_pi14-548_pass1_cl_src1.arf
[Mon Oct 17 00:21:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 00:21:42 2011] Updating source flux to 1.4e-13
[Mon Oct 17 00:23:27 2011] Reading fit data from acisf00117/analysis//spectral/fullrun_ccd7_acisf00117_pi14-548_pass1_cl_src1_pl.csv
[Mon Oct 17 00:23:27 2011] Spectral fit parameter nH value = 4.36573e+22
[Mon Oct 17 00:23:27 2011] Spectral fit parameter PhoIndex value = 3.53441
[Mon Oct 17 00:23:27 2011] Failed to get F(0.3-8.0) from acisf00117/analysis//spectral/fullrun_ccd7_acisf00117_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Oct 17 00:23:27 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 00:23:27 2011] Using Nh = 4.4e+22, photon index=3.53, rate=0.0109, arf fullrun_ccd7_acisf00117_pi14-548_pass1_cl_src1.arf
[Mon Oct 17 00:23:27 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 00:23:27 2011] Updating source flux to 1.3e-13