[Mon Oct 17 00:16:12 2011] Detection parameters:
  Position = (964.7, 412.5) = 19 10 22.07 9 5 1.1
  Extent = 1.3" x 1.2", rotation angle = 19 degrees
  Source counts = 428.3 +/- 23.4
  Background counts = 117.7
  Rate = 0.008 +/- 0.0004

[Mon Oct 17 00:16:13 2011] Off-axis axis estimate = 9.79'
[Mon Oct 17 00:17:30 2011] Using EEF radius (= 4.24 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 00:17:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 17 00:17:30 2011] Initial guess for spatial extent in simple fitting = 4.24"
[Mon Oct 17 00:17:30 2011] source mask rpix=8.6, npix_max = 333, mask sum = 342, frac = 1.027
[Mon Oct 17 00:17:30 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 4.24"
[Mon Oct 17 00:17:30 2011] fullrun_ccd6_acisf00117_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 17 00:17:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00117_pi14-548_cl_pass0_src1.csv
[Mon Oct 17 00:17:30 2011] fullrun_ccd6_acisf00117_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 17 00:17:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00117_pi14-548_cl_pass0_src1.csv
[Mon Oct 17 00:17:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00117_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00117_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 00:17:31 2011] fullrun_ccd6_acisf00117_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 17 00:17:31 2011] fullrun_ccd6_acisf00117_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 17 00:17:31 2011] Fit fullrun_ccd6_acisf00117_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 17 00:17:48 2011] Spatial fit model total counts = 1002.010000, observed total counts = 994.000000
[Mon Oct 17 00:17:48 2011] Offset between fit and detection position for source 3 = 7.138990 pixels
[Mon Oct 17 00:17:48 2011] 1001.816000 total counts/ 145.263000 bgd. counts: snr = 71.068432
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 7.138990 pixels
  Position = (970.6, 416.5) = 19 10 21.89 9 5 2.8
  Extent = 5.6 (5.2-6.0)", rotation angle = 0
  Source counts = 856.6 +/- 31.7
  Background counts = 145.3
  Rate = 0.02 +/- 0.0006
[Mon Oct 17 00:17:48 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 00:17:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 00:17:48 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 00:17:48 2011] Source does appear to be extended
[Mon Oct 17 00:17:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 00:18:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 00:18:23 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 17 00:18:23 2011] Initial guess for spatial extent in simple fitting = 5.59"
[Mon Oct 17 00:18:23 2011] source mask rpix=11.4, npix_max = 562, mask sum = 506, frac = 0.899
[Mon Oct 17 00:18:23 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.59"
[Mon Oct 17 00:18:23 2011] fullrun_ccd6_acisf00117_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 17 00:18:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00117_pi14-548_cl_pass1_src1.csv
[Mon Oct 17 00:18:23 2011] fullrun_ccd6_acisf00117_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 17 00:18:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00117_pi14-548_cl_pass1_src1.csv
[Mon Oct 17 00:18:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00117_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00117_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 00:18:24 2011] fullrun_ccd6_acisf00117_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 17 00:18:24 2011] fullrun_ccd6_acisf00117_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 17 00:18:24 2011] Fit fullrun_ccd6_acisf00117_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 17 00:18:32 2011] Spatial fit model total counts = 1080.130000, observed total counts = 1072.000000
[Mon Oct 17 00:18:32 2011] Offset between fit and detection position for source 3 = 0.060303 pixels
[Mon Oct 17 00:18:32 2011] 1079.454000 total counts/ 179.293000 bgd. counts: snr = 67.226194
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.060303 pixels
  Position = (970.6, 416.4) = 19 10 21.89 9 5 2.8
  Extent = 5.8 (5.5-6.1)", rotation angle = 0
  Source counts = 900.2 +/- 32.9
  Background counts = 179.3
  Rate = 0.02 +/- 0.0006
[Mon Oct 17 00:18:32 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 00:18:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 00:18:32 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 00:18:32 2011] Source does appear to be extended
[Mon Oct 17 00:18:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 00:19:12 2011] Not overwriting source region fullrun_ccd6_acisf00117_pi14-548_pass1_cl_src3_src.reg
[Mon Oct 17 00:19:12 2011] Extracting stamp from image fullrun_ccd6_acisf00117_pi14-548_cl_sm2.00.img.gz, (707, 153) - (1055, 680)
[Mon Oct 17 00:19:12 2011] Writing fullrun_ccd6_acisf00117_pi14-548_pass1_cl_src3.gif
[Mon Oct 17 00:19:13 2011] ../../acisf00117/products/events/fullrun_ccd6_acisf00117_pi14-548_pass1_cl_src3_src.evt and ../../acisf00117/products/events/fullrun_ccd6_acisf00117_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Mon Oct 17 00:19:13 2011] Size of ../../acisf00117/products/events/fullrun_ccd6_acisf00117_pi14-548_pass1_cl_src3_src.evt.gz[events] = 1040 counts
[Mon Oct 17 00:19:13 2011] Mean chipx,y = (69.76, 403.83)
[Mon Oct 17 00:19:13 2011] Mean tdetx,y = (2944.76, 2105.83)
[Mon Oct 17 00:19:13 2011] chipx,y range = (11.00-124.00, 344.00-455.00)
[Mon Oct 17 00:19:13 2011] Size of ../../acisf00117/products/events/fullrun_ccd6_acisf00117_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 798 counts
[Mon Oct 17 00:19:13 2011] ../../acisf00117/products/images/fullrun_ccd6_acisf00117_pi14-548_pass1_cl_src3_src.img and ../../acisf00117/products/images/fullrun_ccd6_acisf00117_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Mon Oct 17 00:19:13 2011] ../../acisf00117/products/spectra/fullrun_ccd6_acisf00117_pi14-548_pass1_cl_src3_src.pi and ../../acisf00117/products/spectra/fullrun_ccd6_acisf00117_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Mon Oct 17 00:19:17 2011] ../../acisf00117/products/lightcurves/fullrun_ccd6_acisf00117_pi14-548_pass1_cl_src3_src.lc and ../../acisf00117/products/lightcurves/fullrun_ccd6_acisf00117_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Mon Oct 17 00:19:27 2011] Keeping rmf generated by specextract
[Mon Oct 17 00:19:27 2011] 155.599
[Mon Oct 17 00:21:42 2011] Updating aperture counts using extracted products
[Mon Oct 17 00:21:42 2011] Error reading totcts from fullrun_ccd6_acisf00117_pi14-548_pass1_cl_src3_src.pi.gz
[Mon Oct 17 00:21:42 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 00:21:42 2011] Using photon index=1.80, rate=0.0167, arf fullrun_ccd6_acisf00117_pi14-548_pass1_cl_src3.arf
[Mon Oct 17 00:21:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 00:21:42 2011] Updating source flux to 3.5e-13
[Mon Oct 17 00:21:54 2011] Reading fit data from acisf00117/analysis//spectral/fullrun_ccd6_acisf00117_pi14-548_pass1_cl_src3_pl.csv
[Mon Oct 17 00:21:54 2011] Spectral fit parameter nH value = 6.59069e+22
[Mon Oct 17 00:21:54 2011] Spectral fit parameter PhoIndex value = 1.69905
[Mon Oct 17 00:21:54 2011] Failed to get F(0.3-8.0) from acisf00117/analysis//spectral/fullrun_ccd6_acisf00117_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Mon Oct 17 00:21:54 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 00:21:54 2011] Using Nh = 6.6e+22, photon index=1.70, rate=0.0167, arf fullrun_ccd6_acisf00117_pi14-548_pass1_cl_src3.arf
[Mon Oct 17 00:21:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 00:21:54 2011] Updating source flux to 5.9e-13