[Fri Feb 24 16:45:15 2012] Detection parameters:
  Position = (540.3, 235.5) = 11 4 37.40 59 46 21.9
  Extent = 0.5" x 0.5", rotation angle = 68 degrees
  Source counts = 170.1 +/- 13.1
  Background counts = 0.9
  Rate = 0.02 +/- 0.002

[Fri Feb 24 16:45:16 2012] Off-axis axis estimate = 0.20'
[Fri Feb 24 16:58:52 2012] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 16:58:52 2012] Initial guess for spatial extent in simple fitting = 0.41"
[Fri Feb 24 16:58:52 2012] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.257
[Fri Feb 24 16:58:52 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.41"
[Fri Feb 24 17:01:54 2012] fullrun_ccd7_acisf11696_pi14-548_cl_pass0_src1.ximg exists
[Fri Feb 24 17:01:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11696_pi14-548_cl_pass0_src1.csv
[Fri Feb 24 17:01:54 2012] fullrun_ccd7_acisf11696_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Feb 24 17:01:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11696_pi14-548_cl_pass0_src1.csv
[Fri Feb 24 17:01:54 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11696_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11696_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 17:01:54 2012] fullrun_ccd7_acisf11696_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Feb 24 17:01:54 2012] fullrun_ccd7_acisf11696_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Feb 24 17:01:54 2012] Fit fullrun_ccd7_acisf11696_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Feb 24 17:01:57 2012] Spatial fit model total counts = 171.903000, observed total counts = 172.000000
[Fri Feb 24 17:01:57 2012] Offset between fit and detection position for source 3 = 0.699313 pixels
[Fri Feb 24 17:01:57 2012] 172.199100 total counts/ 12.672100 bgd. counts: snr = 44.813607
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.699313 pixels
  Position = (540.8, 236.0) = 11 4 37.40 59 46 21.9
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 159.5 +/- 13.1
  Background counts = 12.7
  Rate = 0.02 +/- 0.002
[Fri Feb 24 17:01:57 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 17:01:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 17:01:57 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 17:01:57 2012] Source does appear to be extended
[Fri Feb 24 17:01:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 17:13:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 24 17:13:24 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Fri Feb 24 17:13:24 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.898
[Fri Feb 24 17:13:24 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.39"
[Fri Feb 24 17:17:35 2012] fullrun_ccd7_acisf11696_pi14-548_cl_pass1_src1.ximg exists
[Fri Feb 24 17:17:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11696_pi14-548_cl_pass1_src1.csv
[Fri Feb 24 17:17:35 2012] fullrun_ccd7_acisf11696_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Feb 24 17:17:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11696_pi14-548_cl_pass1_src1.csv
[Fri Feb 24 17:17:35 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11696_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11696_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 17:17:35 2012] fullrun_ccd7_acisf11696_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Feb 24 17:17:35 2012] fullrun_ccd7_acisf11696_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Feb 24 17:17:35 2012] Fit fullrun_ccd7_acisf11696_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Feb 24 17:17:38 2012] Spatial fit model total counts = 171.956000, observed total counts = 172.000000
[Fri Feb 24 17:17:38 2012] Offset between fit and detection position for source 3 = 0.008910 pixels
[Fri Feb 24 17:17:38 2012] 172.000400 total counts/ 13.451400 bgd. counts: snr = 43.229455
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.008910 pixels
  Position = (540.8, 236.0) = 11 4 37.40 59 46 22.0
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 158.5 +/- 13.1
  Background counts = 13.5
  Rate = 0.02 +/- 0.002
[Fri Feb 24 17:17:38 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 17:17:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 17:17:38 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 17:17:38 2012] Source does appear to be extended
[Fri Feb 24 17:17:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 17:21:08 2012] Writing source region out to fullrun_ccd7_acisf11696_pi14-548_pass1_cl_src3_src.reg
[Fri Feb 24 17:21:08 2012] Extracting stamp from image fullrun_ccd7_acisf11696_pi14-548_cl_sm2.00.img.gz, (523, 219) - (558, 253)
[Fri Feb 24 17:21:08 2012] Writing fullrun_ccd7_acisf11696_pi14-548_pass1_cl_src3.gif
[Fri Feb 24 17:21:09 2012] Size of ../../acisf11696/products/events/fullrun_ccd7_acisf11696_pi14-548_pass1_cl_src3_src.evt.gz[events] = 164 counts
[Fri Feb 24 17:21:09 2012] Mean chipx,y = (178.51, 521.24)
[Fri Feb 24 17:21:09 2012] Mean tdetx,y = (4095.51, 2223.24)
[Fri Feb 24 17:21:09 2012] chipx,y range = (163.00-198.00, 503.00-541.00)
[Fri Feb 24 17:21:09 2012] Size of ../../acisf11696/products/events/fullrun_ccd7_acisf11696_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 3 counts
[Fri Feb 24 17:21:10 2012] rmf not found, will run specextract
[Fri Feb 24 17:21:10 2012] arf not found, will run specextract
[Fri Feb 24 17:21:18 2012] ../../acisf11696/products/spectra/fullrun_ccd7_acisf11696_pi14-548_pass1_cl_src3.warf not found
[Fri Feb 24 17:21:18 2012] ../../acisf11696/products/spectra/fullrun_ccd7_acisf11696_pi14-548_pass1_cl_src3.wrmf not found
[Fri Feb 24 17:21:18 2012] Removal of ../../acisf11696/products/spectra/fullrun_ccd7_acisf11696_pi14-548_pass1_cl_src3.soff failed
[Fri Feb 24 17:23:21 2012] Keeping rmf generated by specextract
[Fri Feb 24 17:23:21 2012] 233.395
[Fri Feb 24 17:23:23 2012] Updating aperture counts using extracted products
[Fri Feb 24 17:23:23 2012] Error reading totcts from fullrun_ccd7_acisf11696_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Feb 24 17:23:23 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 17:23:23 2012] Using photon index=1.80, rate=0.0192, arf fullrun_ccd7_acisf11696_pi14-548_pass1_cl_src3.arf
[Fri Feb 24 17:23:23 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 24 17:23:23 2012] Updating source flux to 1.4e-13
[Fri Feb 24 17:23:34 2012] Reading fit data from acisf11696/analysis//spectral/fullrun_ccd7_acisf11696_pi14-548_pass1_cl_src3_pl.csv
[Fri Feb 24 17:23:34 2012] Spectral fit parameter nH value = 5.49521e+13
[Fri Feb 24 17:23:34 2012] Spectral fit parameter PhoIndex value = 1.79599
[Fri Feb 24 17:23:34 2012] Failed to get F(0.3-8.0) from acisf11696/analysis//spectral/fullrun_ccd7_acisf11696_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Fri Feb 24 17:23:34 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 17:23:34 2012] Using Nh = 5.5e+13, photon index=1.80, rate=0.0192, arf fullrun_ccd7_acisf11696_pi14-548_pass1_cl_src3.arf
[Fri Feb 24 17:23:34 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 24 17:23:34 2012] Updating source flux to 1.4e-13