[Wed Oct 19 00:00:58 2011] Detection parameters:
  Position = (1088.0, 681.2) = 14 25 40.07 44 12 20.8
  Extent = 1.8" x 1.0", rotation angle = 165 degrees
  Source counts = 12.1 +/- 3.7
  Background counts = 1.9
  Rate = 0.002 +/- 0.0006

[Wed Oct 19 00:00:59 2011] Off-axis axis estimate = 5.81'
[Wed Oct 19 00:17:06 2011] Using EEF radius (= 1.54 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 00:17:06 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 00:17:06 2011] Initial guess for spatial extent in simple fitting = 1.54"
[Wed Oct 19 00:17:06 2011] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.064
[Wed Oct 19 00:17:06 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 1.54"
[Wed Oct 19 00:22:42 2011] fullrun_ccd7_acisf11694_pi14-548_cl_pass0_src6.ximg exists
[Wed Oct 19 00:22:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11694_pi14-548_cl_pass0_src6.csv
[Wed Oct 19 00:22:42 2011] fullrun_ccd7_acisf11694_pi14-548_cl_pass0_src6_1.ximg exists
[Wed Oct 19 00:22:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11694_pi14-548_cl_pass0_src6.csv
[Wed Oct 19 00:22:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11694_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11694_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 00:22:42 2011] fullrun_ccd7_acisf11694_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Wed Oct 19 00:22:42 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf11694_pi14-548_cl_pass0_tfrozen_src6.csv
[Wed Oct 19 00:22:42 2011] fullrun_ccd7_acisf11694_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Oct 19 00:22:42 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf11694_pi14-548_cl_pass0_tfrozen_src6.csv
[Wed Oct 19 00:22:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11694_pi14-548_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11694_pi14-548_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 00:22:45 2011] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 17.545070 pixels away
[Wed Oct 19 00:22:45 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 00:22:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 00:22:45 2011] Assessing source extent using major
[Wed Oct 19 00:22:45 2011] Source does appear to be extended
[Wed Oct 19 00:22:45 2011] Computing asymmetry using major and minor axis, asym = 1.71
[Wed Oct 19 00:22:45 2011] Source is asymmetric
[Wed Oct 19 00:48:35 2011] Using EEF radius (= 1.54 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 00:48:35 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 00:48:35 2011] Initial guess for spatial extent in simple fitting = 1.54"
[Wed Oct 19 00:48:35 2011] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.064
[Wed Oct 19 00:48:35 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 1.54"
[Wed Oct 19 00:54:44 2011] fullrun_ccd7_acisf11694_pi14-548_cl_pass1_src6.ximg exists
[Wed Oct 19 00:54:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11694_pi14-548_cl_pass1_src6.csv
[Wed Oct 19 00:54:44 2011] fullrun_ccd7_acisf11694_pi14-548_cl_pass1_src6_1.ximg exists
[Wed Oct 19 00:54:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11694_pi14-548_cl_pass1_src6.csv
[Wed Oct 19 00:54:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11694_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11694_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 00:54:44 2011] fullrun_ccd7_acisf11694_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Wed Oct 19 00:54:44 2011] fullrun_ccd7_acisf11694_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Oct 19 00:54:44 2011] Fit fullrun_ccd7_acisf11694_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Wed Oct 19 00:54:47 2011] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 18.244009 pixels away
[Wed Oct 19 00:54:47 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 00:54:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 00:54:47 2011] Assessing source extent using major
[Wed Oct 19 00:54:47 2011] Source does appear to be extended
[Wed Oct 19 00:54:47 2011] Computing asymmetry using major and minor axis, asym = 1.71
[Wed Oct 19 00:54:47 2011] Source is asymmetric
[Wed Oct 19 00:57:03 2011] Writing source region out to fullrun_ccd7_acisf11694_pi14-548_pass1_cl_src10_src.reg
[Wed Oct 19 00:57:03 2011] Extracting stamp from image fullrun_ccd7_acisf11694_pi14-548_cl_sm2.00.img.gz, (1008, 601) - (1168, 761)
[Wed Oct 19 00:57:03 2011] Writing fullrun_ccd7_acisf11694_pi14-548_pass1_cl_src10.gif
[Wed Oct 19 00:58:26 2011] Size of ../../acisf11694/products/events/fullrun_ccd7_acisf11694_pi14-548_pass1_cl_src10_src.evt.gz[events] = 14 counts
[Wed Oct 19 00:58:26 2011] Mean chipx,y = (853.07, 716.07)
[Wed Oct 19 00:58:26 2011] Mean tdetx,y = (4770.07, 2418.07)
[Wed Oct 19 00:58:26 2011] chipx,y range = (840.00-870.00, 689.00-727.00)
[Wed Oct 19 00:58:26 2011] Size of ../../acisf11694/products/events/fullrun_ccd7_acisf11694_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 38 counts
[Wed Oct 19 00:58:27 2011] Not generating rmf since there are only 12 counts
[Wed Oct 19 00:58:27 2011] arf not found, will run specextract
[Wed Oct 19 00:58:35 2011] ../../acisf11694/products/spectra/fullrun_ccd7_acisf11694_pi14-548_pass1_cl_src10.warf not found
[Wed Oct 19 00:58:35 2011] ../../acisf11694/products/spectra/fullrun_ccd7_acisf11694_pi14-548_pass1_cl_src10.wrmf not found
[Wed Oct 19 00:58:35 2011] Removal of ../../acisf11694/products/spectra/fullrun_ccd7_acisf11694_pi14-548_pass1_cl_src10.soff failed
[Wed Oct 19 01:00:45 2011] Spectrum 10 has only 12 counts, deleting rmf
[Wed Oct 19 01:00:45 2011] 212.172
[Wed Oct 19 01:00:46 2011] Updating aperture counts using extracted products
[Wed Oct 19 01:00:46 2011] Error reading totcts from fullrun_ccd7_acisf11694_pi14-548_pass1_cl_src10_src.pi.gz
[Wed Oct 19 01:00:46 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 01:00:46 2011] Using photon index=1.80, rate=0.00202, arf fullrun_ccd7_acisf11694_pi14-548_pass1_cl_src10.arf
[Wed Oct 19 01:00:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 01:00:46 2011] Updating source flux to 1.6e-14
[Wed Oct 19 01:00:53 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Oct 19 01:00:54 2011] acisf11694/analysis//spectral/fullrun_ccd7_acisf11694_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete