[Tue Feb 28 00:23:45 2012] Detection parameters:
  Position = (715.8, 146.8) = 2 59 55.44 -10 56 42.3
  Extent = 4.0" x 1.9", rotation angle = 24 degrees
  Source counts = 23.3 +/- 5.5
  Background counts = 6.7
  Rate = 0.002 +/- 0.0006

[Tue Feb 28 00:23:45 2012] Off-axis axis estimate = 10.13'
[Tue Feb 28 00:39:15 2012] Using EEF radius (= 4.55 ")to estimate initial spatial extent for simple fitting
[Tue Feb 28 00:39:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 28 00:39:15 2012] Initial guess for spatial extent in simple fitting = 4.55"
[Tue Feb 28 00:39:15 2012] source mask rpix=9.2, npix_max = 379, mask sum = 400, frac = 1.053
[Tue Feb 28 00:39:15 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 4.55"
[Tue Feb 28 00:47:06 2012] fullrun_ccd3_acisf11683_pi14-548_cl_pass0_src3.ximg exists
[Tue Feb 28 00:47:06 2012] fullrun_ccd3_acisf11683_pi14-548_cl_pass0_src3_1.ximg exists
[Tue Feb 28 00:47:06 2012] Fit fullrun_ccd3_acisf11683_pi14-548_cl_pass0_src3 appears to have run properly
[Tue Feb 28 00:47:06 2012] fullrun_ccd3_acisf11683_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Tue Feb 28 00:47:06 2012] fullrun_ccd3_acisf11683_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Feb 28 00:47:06 2012] Fit fullrun_ccd3_acisf11683_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Feb 28 00:47:11 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 52.994671 pixels away
[Tue Feb 28 00:47:11 2012] Vigneting correction estimate = 1.000000
[Tue Feb 28 00:47:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 28 00:47:11 2012] Assessing source extent using major
[Tue Feb 28 00:47:11 2012] Source does appear to be extended
[Tue Feb 28 00:47:11 2012] Computing asymmetry using major and minor axis, asym = 2.10
[Tue Feb 28 00:47:11 2012] Source is asymmetric
[Tue Feb 28 00:59:53 2012] Using EEF radius (= 4.55 ")to estimate initial spatial extent for simple fitting
[Tue Feb 28 00:59:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 28 00:59:53 2012] Initial guess for spatial extent in simple fitting = 4.55"
[Tue Feb 28 00:59:53 2012] source mask rpix=9.2, npix_max = 379, mask sum = 400, frac = 1.053
[Tue Feb 28 00:59:53 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.55"
[Tue Feb 28 01:13:09 2012] fullrun_ccd3_acisf11683_pi14-548_cl_pass1_src3.ximg exists
[Tue Feb 28 01:13:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11683_pi14-548_cl_pass1_src3.csv
[Tue Feb 28 01:13:09 2012] fullrun_ccd3_acisf11683_pi14-548_cl_pass1_src3_1.ximg exists
[Tue Feb 28 01:13:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11683_pi14-548_cl_pass1_src3.csv
[Tue Feb 28 01:13:09 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11683_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11683_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 28 01:13:09 2012] fullrun_ccd3_acisf11683_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Tue Feb 28 01:13:09 2012] fullrun_ccd3_acisf11683_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Feb 28 01:13:09 2012] Fit fullrun_ccd3_acisf11683_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Feb 28 01:13:14 2012] Spatial fit model total counts = 37.999000, observed total counts = 38.000000
[Tue Feb 28 01:13:14 2012] Offset between fit and detection position for source 10 = 1.670044 pixels
[Tue Feb 28 01:13:14 2012] 38.119600 total counts/ 17.462300 bgd. counts: snr = 4.943367
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.670044 pixels
  Position = (715.5, 148.4) = 2 59 55.46 -10 56 41.8
  Extent = 2.6 (1.9-3.5)", rotation angle = 0
  Source counts = 20.7 +/- 6.2
  Background counts = 17.5
  Rate = 0.002 +/- 0.0006
[Tue Feb 28 01:13:14 2012] Vigneting correction estimate = 1.000000
[Tue Feb 28 01:13:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 28 01:13:14 2012] Assessing source extent using major axis lower bound
[Tue Feb 28 01:13:14 2012] Source does appear to be extended
[Tue Feb 28 01:13:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 28 01:27:28 2012] Writing source region out to fullrun_ccd3_acisf11683_pi14-548_pass1_cl_src10_src.reg
[Tue Feb 28 01:27:28 2012] Extracting stamp from image fullrun_ccd3_acisf11683_pi14-548_cl_sm2.00.img.gz, (596, 29) - (835, 268)
[Tue Feb 28 01:27:28 2012] Writing fullrun_ccd3_acisf11683_pi14-548_pass1_cl_src10.gif
[Tue Feb 28 01:28:38 2012] Size of ../../acisf11683/products/events/fullrun_ccd3_acisf11683_pi14-548_pass1_cl_src10_src.evt.gz[events] = 27 counts
[Tue Feb 28 01:28:38 2012] Mean chipx,y = (138.48, 88.22)
[Tue Feb 28 01:28:38 2012] Mean tdetx,y = (5043.78, 3199.48)
[Tue Feb 28 01:28:38 2012] chipx,y range = (111.00-164.00, 65.00-114.00)
[Tue Feb 28 01:28:38 2012] Size of ../../acisf11683/products/events/fullrun_ccd3_acisf11683_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 51 counts
[Tue Feb 28 01:28:39 2012] Not generating rmf since there are only 20 counts
[Tue Feb 28 01:28:39 2012] arf not found, will run specextract
[Tue Feb 28 01:28:55 2012] ../../acisf11683/products/spectra/fullrun_ccd3_acisf11683_pi14-548_pass1_cl_src10.warf not found
[Tue Feb 28 01:28:55 2012] ../../acisf11683/products/spectra/fullrun_ccd3_acisf11683_pi14-548_pass1_cl_src10.wrmf not found
[Tue Feb 28 01:28:55 2012] Removal of ../../acisf11683/products/spectra/fullrun_ccd3_acisf11683_pi14-548_pass1_cl_src10.soff failed
[Tue Feb 28 01:31:03 2012] Spectrum 10 has only 21 counts, deleting rmf
[Tue Feb 28 01:31:03 2012] 155.683
[Tue Feb 28 01:31:06 2012] Updating aperture counts using extracted products
[Tue Feb 28 01:31:06 2012] Error reading totcts from fullrun_ccd3_acisf11683_pi14-548_pass1_cl_src10_src.pi.gz
[Tue Feb 28 01:31:06 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 28 01:31:06 2012] Using photon index=1.80, rate=0.00208, arf fullrun_ccd3_acisf11683_pi14-548_pass1_cl_src10.arf
[Tue Feb 28 01:31:06 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 28 01:31:06 2012] Updating source flux to 3.2e-14
[Tue Feb 28 01:31:11 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting