[Mon Oct 10 01:59:47 2011] Detection parameters:
  Position = (518.5, 924.7) = 1 51 29.02 -5 25 28.0
  Extent = 1.0" x 0.5", rotation angle = 88 degrees
  Source counts = 10.4 +/- 3.6
  Background counts = 2.6
  Rate = 0.001 +/- 0.0004

[Mon Oct 10 01:59:48 2011] Off-axis axis estimate = 8.46'
[Mon Oct 10 02:00:24 2011] Using EEF radius (= 3.16 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 02:00:24 2011] Initial guess for spatial extent in simple fitting = 3.16"
[Mon Oct 10 02:00:24 2011] source mask rpix=6.4, npix_max = 191, mask sum = 168, frac = 0.875
[Mon Oct 10 02:00:24 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 3.16"
[Mon Oct 10 02:00:24 2011] fullrun_ccd2_acisf11681_pi14-548_cl_pass0_src3.ximg exists
[Mon Oct 10 02:00:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11681_pi14-548_cl_pass0_src3.csv
[Mon Oct 10 02:00:24 2011] fullrun_ccd2_acisf11681_pi14-548_cl_pass0_src3_1.ximg exists
[Mon Oct 10 02:00:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11681_pi14-548_cl_pass0_src3.csv
[Mon Oct 10 02:00:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11681_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11681_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 02:00:24 2011] fullrun_ccd2_acisf11681_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Mon Oct 10 02:00:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11681_pi14-548_cl_pass0_tfrozen_src3.csv
[Mon Oct 10 02:00:24 2011] fullrun_ccd2_acisf11681_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Oct 10 02:00:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11681_pi14-548_cl_pass0_tfrozen_src3.csv
[Mon Oct 10 02:00:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11681_pi14-548_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11681_pi14-548_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 02:00:30 2011] Spatial fit model total counts = 17.067900, observed total counts = 19.000000
[Mon Oct 10 02:00:30 2011] Offset between fit and detection position for source 8 = 1.319587 pixels
[Mon Oct 10 02:00:30 2011] 16.887830 total counts/ 10.743700 bgd. counts: snr = 1.874491
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 1.319587 pixels
  Position = (519.2, 925.8) = 1 51 29.01 -5 25 27.7
  Extent = 1.5 (1.5-3.0)" x 0.5 (0.2-1.5)", rotation angle = 90 (89-90) degrees
  Source counts = 6.1 +/- 4.1
  Background counts = 10.7
  Rate = 0.0006 +/- 0.0004
  Deleting source due to low Poisson probability