[Thu Sep 29 05:03:59 2011] Detection parameters:
  Position = (584.5, 939.5) = 4 25 5.72 75 22 23.7
  Extent = 2.7" x 2.1", rotation angle = 18 degrees
  Source counts = 167.8 +/- 13.7
  Background counts = 20.2
  Rate = 0.01 +/- 0.0009

[Thu Sep 29 05:04:00 2011] Off-axis axis estimate = 7.52'
[Thu Sep 29 05:04:48 2011] Using EEF radius (= 2.50 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 05:04:48 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 29 05:04:48 2011] Initial guess for spatial extent in simple fitting = 2.50"
[Thu Sep 29 05:04:48 2011] source mask rpix=5.1, npix_max = 124, mask sum = 121, frac = 0.969
[Thu Sep 29 05:04:48 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.50"
[Thu Sep 29 05:04:49 2011] fullrun_ccd6_acisf11673_pi14-548_cl_pass0_src1.ximg exists
[Thu Sep 29 05:04:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11673_pi14-548_cl_pass0_src1.csv
[Thu Sep 29 05:04:49 2011] fullrun_ccd6_acisf11673_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Sep 29 05:04:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11673_pi14-548_cl_pass0_src1.csv
[Thu Sep 29 05:04:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11673_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11673_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 05:04:49 2011] fullrun_ccd6_acisf11673_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep 29 05:04:49 2011] fullrun_ccd6_acisf11673_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep 29 05:04:49 2011] Fit fullrun_ccd6_acisf11673_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep 29 05:04:56 2011] Spatial fit model total counts = 189.787000, observed total counts = 190.000000
[Thu Sep 29 05:04:56 2011] Offset between fit and detection position for source 1 = 0.486518 pixels
[Thu Sep 29 05:04:56 2011] 190.137310 total counts/ 8.981310 bgd. counts: snr = 60.448131
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.486518 pixels
  Position = (584.9, 939.8) = 4 25 5.73 75 22 23.6
  Extent = 3.2 (2.8-3.5)", rotation angle = 0
  Source counts = 181.2 +/- 13.8
  Background counts = 9.0
  Rate = 0.01 +/- 0.0009
[Thu Sep 29 05:04:56 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 05:04:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 05:04:56 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 05:04:56 2011] Source does appear to be extended
[Thu Sep 29 05:04:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 05:05:16 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 05:05:16 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 29 05:05:16 2011] Initial guess for spatial extent in simple fitting = 3.21"
[Thu Sep 29 05:05:16 2011] source mask rpix=6.5, npix_max = 196, mask sum = 196, frac = 0.995
[Thu Sep 29 05:05:16 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.21"
[Thu Sep 29 05:05:17 2011] fullrun_ccd6_acisf11673_pi14-548_cl_pass1_src1.ximg exists
[Thu Sep 29 05:05:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11673_pi14-548_cl_pass1_src1.csv
[Thu Sep 29 05:05:17 2011] fullrun_ccd6_acisf11673_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Sep 29 05:05:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11673_pi14-548_cl_pass1_src1.csv
[Thu Sep 29 05:05:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11673_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11673_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 05:05:17 2011] fullrun_ccd6_acisf11673_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep 29 05:05:17 2011] fullrun_ccd6_acisf11673_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep 29 05:05:17 2011] Fit fullrun_ccd6_acisf11673_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep 29 05:05:27 2011] Spatial fit model total counts = 195.764000, observed total counts = 194.000000
[Thu Sep 29 05:05:27 2011] Offset between fit and detection position for source 1 = 0.218009 pixels
[Thu Sep 29 05:05:27 2011] 195.942000 total counts/ 11.620000 bgd. counts: snr = 54.072209
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.218009 pixels
  Position = (584.9, 940.0) = 4 25 5.73 75 22 23.7
  Extent = 3.2 (2.9-3.5)", rotation angle = 0
  Source counts = 184.3 +/- 14.0
  Background counts = 11.6
  Rate = 0.01 +/- 0.0009
[Thu Sep 29 05:05:27 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 05:05:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 05:05:27 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 05:05:27 2011] Source does appear to be extended
[Thu Sep 29 05:05:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 05:06:09 2011] Not overwriting source region fullrun_ccd6_acisf11673_pi14-548_pass1_cl_src1_src.reg
[Thu Sep 29 05:06:09 2011] Extracting stamp from image fullrun_ccd6_acisf11673_pi14-548_cl_sm2.00.img.gz, (440, 795) - (730, 1085)
[Thu Sep 29 05:06:09 2011] Writing fullrun_ccd6_acisf11673_pi14-548_pass1_cl_src1.gif
[Thu Sep 29 05:06:11 2011] ../../acisf11673/products/events/fullrun_ccd6_acisf11673_pi14-548_pass1_cl_src1_src.evt and ../../acisf11673/products/events/fullrun_ccd6_acisf11673_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Sep 29 05:06:11 2011] Size of ../../acisf11673/products/events/fullrun_ccd6_acisf11673_pi14-548_pass1_cl_src1_src.evt.gz[events] = 192 counts
[Thu Sep 29 05:06:11 2011] Mean chipx,y = (341.60, 281.90)
[Thu Sep 29 05:06:11 2011] Mean tdetx,y = (3216.60, 1983.90)
[Thu Sep 29 05:06:11 2011] chipx,y range = (302.00-372.00, 249.00-312.00)
[Thu Sep 29 05:06:11 2011] Size of ../../acisf11673/products/events/fullrun_ccd6_acisf11673_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 149 counts
[Thu Sep 29 05:06:11 2011] ../../acisf11673/products/images/fullrun_ccd6_acisf11673_pi14-548_pass1_cl_src1_src.img and ../../acisf11673/products/images/fullrun_ccd6_acisf11673_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Sep 29 05:06:11 2011] ../../acisf11673/products/spectra/fullrun_ccd6_acisf11673_pi14-548_pass1_cl_src1_src.pi and ../../acisf11673/products/spectra/fullrun_ccd6_acisf11673_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Sep 29 05:06:15 2011] ../../acisf11673/products/lightcurves/fullrun_ccd6_acisf11673_pi14-548_pass1_cl_src1_src.lc and ../../acisf11673/products/lightcurves/fullrun_ccd6_acisf11673_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Sep 29 05:07:16 2011] Keeping rmf generated by specextract
[Thu Sep 29 05:07:16 2011] 178.326
[Thu Sep 29 05:08:51 2011] Updating aperture counts using extracted products
[Thu Sep 29 05:08:51 2011] Error reading totcts from fullrun_ccd6_acisf11673_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Sep 29 05:08:52 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 05:08:52 2011] Using photon index=1.80, rate=0.0124, arf fullrun_ccd6_acisf11673_pi14-548_pass1_cl_src1.arf
[Thu Sep 29 05:08:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 05:08:52 2011] Updating source flux to 1.5e-13
[Thu Sep 29 05:09:05 2011] Reading fit data from acisf11673/analysis//spectral/fullrun_ccd6_acisf11673_pi14-548_pass1_cl_src1_pl.csv
[Thu Sep 29 05:09:05 2011] Spectral fit parameter nH value = 6.64534e+12
[Thu Sep 29 05:09:05 2011] Spectral fit parameter PhoIndex value = 1.85227
[Thu Sep 29 05:09:05 2011] Failed to get F(0.3-8.0) from acisf11673/analysis//spectral/fullrun_ccd6_acisf11673_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Sep 29 05:09:05 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 05:09:05 2011] Using Nh = 6.6e+12, photon index=1.85, rate=0.0124, arf fullrun_ccd6_acisf11673_pi14-548_pass1_cl_src1.arf
[Thu Sep 29 05:09:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 05:09:05 2011] Updating source flux to 1.5e-13