[Wed Feb 15 13:13:51 2012] Detection parameters:
  Position = (581.4, 705.2) = 13 7 47.84 55 41 1.8
  Extent = 0.6" x 0.5", rotation angle = 163 degrees
  Source counts = 127.7 +/- 11.4
  Background counts = 2.3
  Rate = 0.009 +/- 0.0008

[Wed Feb 15 13:13:52 2012] Off-axis axis estimate = 3.13'
[Wed Feb 15 13:40:28 2012] Using EEF radius (= 0.61 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 13:40:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 15 13:40:28 2012] Initial guess for spatial extent in simple fitting = 0.61"
[Wed Feb 15 13:40:28 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.001
[Wed Feb 15 13:40:28 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.61"
[Wed Feb 15 13:51:25 2012] fullrun_ccd7_acisf11665_pi14-548_cl_pass0_src1.ximg exists
[Wed Feb 15 13:51:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11665_pi14-548_cl_pass0_src1.csv
[Wed Feb 15 13:51:25 2012] fullrun_ccd7_acisf11665_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Feb 15 13:51:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11665_pi14-548_cl_pass0_src1.csv
[Wed Feb 15 13:51:25 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11665_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11665_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 13:51:25 2012] fullrun_ccd7_acisf11665_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Feb 15 13:51:25 2012] fullrun_ccd7_acisf11665_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Feb 15 13:51:25 2012] Fit fullrun_ccd7_acisf11665_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Feb 15 13:51:30 2012] Spatial fit model total counts = 129.459000, observed total counts = 130.000000
[Wed Feb 15 13:51:30 2012] Offset between fit and detection position for source 2 = 0.725003 pixels
[Wed Feb 15 13:51:30 2012] 129.948350 total counts/ 7.583350 bgd. counts: snr = 44.435151
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.725003 pixels
  Position = (581.9, 705.7) = 13 7 47.84 55 41 1.8
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 122.4 +/- 11.4
  Background counts = 7.6
  Rate = 0.009 +/- 0.0008
[Wed Feb 15 13:51:30 2012] Vigneting correction estimate = 1.000000
[Wed Feb 15 13:51:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 15 13:51:30 2012] Assessing source extent using major axis lower bound
[Wed Feb 15 13:51:30 2012] Source does appear to be extended
[Wed Feb 15 13:51:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 14:13:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 15 14:13:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 15 14:13:59 2012] Initial guess for spatial extent in simple fitting = 0.63"
[Wed Feb 15 14:13:59 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.950
[Wed Feb 15 14:13:59 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.63"
[Wed Feb 15 14:24:34 2012] fullrun_ccd7_acisf11665_pi14-548_cl_pass1_src1.ximg exists
[Wed Feb 15 14:24:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11665_pi14-548_cl_pass1_src1.csv
[Wed Feb 15 14:24:34 2012] fullrun_ccd7_acisf11665_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Feb 15 14:24:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11665_pi14-548_cl_pass1_src1.csv
[Wed Feb 15 14:24:34 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11665_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11665_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 14:24:34 2012] fullrun_ccd7_acisf11665_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Feb 15 14:24:34 2012] fullrun_ccd7_acisf11665_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Feb 15 14:24:34 2012] Fit fullrun_ccd7_acisf11665_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Feb 15 14:24:38 2012] Spatial fit model total counts = 130.917000, observed total counts = 131.000000
[Wed Feb 15 14:24:38 2012] Offset between fit and detection position for source 2 = 0.006239 pixels
[Wed Feb 15 14:24:38 2012] 131.336720 total counts/ 8.806720 bgd. counts: snr = 41.289093
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.006239 pixels
  Position = (581.9, 705.7) = 13 7 47.84 55 41 1.8
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 122.5 +/- 11.5
  Background counts = 8.8
  Rate = 0.009 +/- 0.0008
[Wed Feb 15 14:24:38 2012] Vigneting correction estimate = 1.000000
[Wed Feb 15 14:24:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 15 14:24:38 2012] Assessing source extent using major axis lower bound
[Wed Feb 15 14:24:38 2012] Source does appear to be extended
[Wed Feb 15 14:24:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 14:31:48 2012] Writing source region out to fullrun_ccd7_acisf11665_pi14-548_pass1_cl_src2_src.reg
[Wed Feb 15 14:31:48 2012] Extracting stamp from image fullrun_ccd7_acisf11665_pi14-548_cl_sm2.00.img.gz, (553, 677) - (611, 734)
[Wed Feb 15 14:31:48 2012] Writing fullrun_ccd7_acisf11665_pi14-548_pass1_cl_src2.gif
[Wed Feb 15 14:31:50 2012] Size of ../../acisf11665/products/events/fullrun_ccd7_acisf11665_pi14-548_pass1_cl_src2_src.evt.gz[events] = 125 counts
[Wed Feb 15 14:31:50 2012] Mean chipx,y = (543.30, 350.22)
[Wed Feb 15 14:31:50 2012] Mean tdetx,y = (4460.30, 2052.22)
[Wed Feb 15 14:31:50 2012] chipx,y range = (525.00-561.00, 332.00-368.00)
[Wed Feb 15 14:31:50 2012] Size of ../../acisf11665/products/events/fullrun_ccd7_acisf11665_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 14 counts
[Wed Feb 15 14:31:51 2012] rmf not found, will run specextract
[Wed Feb 15 14:31:51 2012] arf not found, will run specextract
[Wed Feb 15 14:31:58 2012] ../../acisf11665/products/spectra/fullrun_ccd7_acisf11665_pi14-548_pass1_cl_src2.warf not found
[Wed Feb 15 14:31:58 2012] ../../acisf11665/products/spectra/fullrun_ccd7_acisf11665_pi14-548_pass1_cl_src2.wrmf not found
[Wed Feb 15 14:31:58 2012] Removal of ../../acisf11665/products/spectra/fullrun_ccd7_acisf11665_pi14-548_pass1_cl_src2.soff failed
[Wed Feb 15 14:35:58 2012] Keeping rmf generated by specextract
[Wed Feb 15 14:35:58 2012] 226.582
[Wed Feb 15 14:36:00 2012] Updating aperture counts using extracted products
[Wed Feb 15 14:36:00 2012] Error reading totcts from fullrun_ccd7_acisf11665_pi14-548_pass1_cl_src2_src.pi.gz
[Wed Feb 15 14:36:00 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 15 14:36:00 2012] Using photon index=1.80, rate=0.00894, arf fullrun_ccd7_acisf11665_pi14-548_pass1_cl_src2.arf
[Wed Feb 15 14:36:00 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 15 14:36:00 2012] Updating source flux to 6.9e-14
[Wed Feb 15 14:36:09 2012] Reading fit data from acisf11665/analysis//spectral/fullrun_ccd7_acisf11665_pi14-548_pass1_cl_src2_pl.csv
[Wed Feb 15 14:36:09 2012] Spectral fit parameter nH value = 1.59611e+20
[Wed Feb 15 14:36:09 2012] Spectral fit parameter PhoIndex value = 1.71436
[Wed Feb 15 14:36:09 2012] Failed to get F(0.3-8.0) from acisf11665/analysis//spectral/fullrun_ccd7_acisf11665_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Feb 15 14:36:09 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 15 14:36:09 2012] Using Nh = 1.6e+20, photon index=1.71, rate=0.00894, arf fullrun_ccd7_acisf11665_pi14-548_pass1_cl_src2.arf
[Wed Feb 15 14:36:09 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 15 14:36:09 2012] Updating source flux to 7.1e-14