[Fri Sep 30 06:33:07 2011] Detection parameters: Position = (184.9, 933.2) = 12 0 57.52 48 40 10.4 Extent = 1.3" x 1.0", rotation angle = 111 degrees Source counts = 12.6 +/- 4.0 Background counts = 3.4 Rate = 0.0009 +/- 0.0003 [Fri Sep 30 06:33:07 2011] Off-axis axis estimate = 6.02' [Fri Sep 30 06:33:53 2011] Using EEF radius (= 1.64 ")to estimate initial spatial extent for simple fitting [Fri Sep 30 06:33:53 2011] Initial guess for spatial extent in simple fitting = 1.64" [Fri Sep 30 06:33:53 2011] source mask rpix=3.3, npix_max = 58, mask sum = 64, frac = 1.086 [Fri Sep 30 06:33:53 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 1.64" [Fri Sep 30 06:33:54 2011] fullrun_ccd7_acisf11664_pi14-548_cl_pass0_src6.ximg exists [Fri Sep 30 06:33:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11664_pi14-548_cl_pass0_src6.csv [Fri Sep 30 06:33:54 2011] fullrun_ccd7_acisf11664_pi14-548_cl_pass0_src6_1.ximg exists [Fri Sep 30 06:33:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11664_pi14-548_cl_pass0_src6.csv [Fri Sep 30 06:33:54 2011] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf11664_pi14-548_cl_pass0_src6_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf11664_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Sep 30 06:33:54 2011] fullrun_ccd7_acisf11664_pi14-548_cl_pass0_tfrozen_src6.ximg exists [Fri Sep 30 06:33:54 2011] fullrun_ccd7_acisf11664_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists [Fri Sep 30 06:33:54 2011] Fit fullrun_ccd7_acisf11664_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly [Fri Sep 30 06:34:01 2011] Spatial fit model total counts = 20.648200, observed total counts = 21.000000 [Fri Sep 30 06:34:01 2011] Offset between fit and detection position for source 8 = 1.549545 pixels [Fri Sep 30 06:34:01 2011] 20.654630 total counts/ 14.801800 bgd. counts: snr = 1.521278 Spatial fit parameters: Offset between fit and detection position for source 8 = 1.549545 pixels Position = (184.7, 931.7) = 12 0 57.56 48 40 9.4 Extent = 0.5 (0.4-0.7)", rotation angle = 0 Source counts = 5.9 +/- 4.5 Background counts = 14.8 Rate = 0.0004 +/- 0.0003 Deleting source due to low Poisson probability