[Wed Sep 28 19:40:07 2011] Detection parameters:
  Position = (980.4, 629.8) = 14 28 8.90 -2 31 24.9
  Extent = 0.5" x 0.5", rotation angle = 94 degrees
  Source counts = 32.9 +/- 5.7
  Background counts = 0.1
  Rate = 0.007 +/- 0.001

[Wed Sep 28 19:40:08 2011] Off-axis axis estimate = 3.02'
[Wed Sep 28 19:40:36 2011] Using EEF radius (= 0.58 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 19:40:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 28 19:40:36 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Wed Sep 28 19:40:36 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.053
[Wed Sep 28 19:40:36 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.58"
[Wed Sep 28 19:40:36 2011] fullrun_ccd3_acisf11641_pi14-548_cl_pass0_src1.ximg exists
[Wed Sep 28 19:40:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11641_pi14-548_cl_pass0_src1.csv
[Wed Sep 28 19:40:36 2011] fullrun_ccd3_acisf11641_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Sep 28 19:40:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11641_pi14-548_cl_pass0_src1.csv
[Wed Sep 28 19:40:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11641_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11641_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 19:40:36 2011] fullrun_ccd3_acisf11641_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 28 19:40:36 2011] fullrun_ccd3_acisf11641_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 28 19:40:36 2011] Fit fullrun_ccd3_acisf11641_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 28 19:40:40 2011] Spatial fit model total counts = 33.419900, observed total counts = 33.000000
[Wed Sep 28 19:40:40 2011] Offset between fit and detection position for source 2 = 0.809354 pixels
[Wed Sep 28 19:40:40 2011] 33.328855 total counts/ 0.839955 bgd. counts: snr = 35.449246
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.809354 pixels
  Position = (981.0, 630.4) = 14 28 8.90 -2 31 24.8
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 32.5 +/- 5.8
  Background counts = 0.8
  Rate = 0.007 +/- 0.001
[Wed Sep 28 19:40:40 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 19:40:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 19:40:40 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 19:40:40 2011] Source does appear to be extended
[Wed Sep 28 19:40:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 19:40:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 19:40:53 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Wed Sep 28 19:40:53 2011] source mask rpix=1.0, npix_max = 8, mask sum = 6, frac = 0.703
[Wed Sep 28 19:40:53 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.47"
[Wed Sep 28 19:40:54 2011] fullrun_ccd3_acisf11641_pi14-548_cl_pass1_src1.ximg exists
[Wed Sep 28 19:40:54 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11641_pi14-548_cl_pass1_src1.csv
[Wed Sep 28 19:40:54 2011] fullrun_ccd3_acisf11641_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Sep 28 19:40:54 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11641_pi14-548_cl_pass1_src1.csv
[Wed Sep 28 19:40:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11641_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11641_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 19:40:54 2011] fullrun_ccd3_acisf11641_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 28 19:40:54 2011] fullrun_ccd3_acisf11641_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 28 19:40:54 2011] Fit fullrun_ccd3_acisf11641_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 28 19:40:59 2011] Spatial fit model total counts = 33.003600, observed total counts = 33.000000
[Wed Sep 28 19:40:59 2011] Offset between fit and detection position for source 2 = 0.023703 pixels
[Wed Sep 28 19:40:59 2011] 32.847418 total counts/ 0.447218 bgd. counts: snr = 48.449361
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.023703 pixels
  Position = (981.0, 630.4) = 14 28 8.90 -2 31 24.8
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 32.4 +/- 5.7
  Background counts = 0.4
  Rate = 0.006 +/- 0.001
[Wed Sep 28 19:40:59 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 19:40:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 19:40:59 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 19:40:59 2011] Source does appear to be extended
[Wed Sep 28 19:40:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 19:44:21 2011] Not overwriting source region fullrun_ccd3_acisf11641_pi14-548_pass1_cl_src2_src.reg
[Wed Sep 28 19:44:21 2011] Extracting stamp from image fullrun_ccd3_acisf11641_pi14-548_cl_sm2.00.img.gz, (959, 608) - (1003, 653)
[Wed Sep 28 19:44:21 2011] Writing fullrun_ccd3_acisf11641_pi14-548_pass1_cl_src2.gif
[Wed Sep 28 19:44:22 2011] ../../acisf11641/products/events/fullrun_ccd3_acisf11641_pi14-548_pass1_cl_src2_src.evt and ../../acisf11641/products/events/fullrun_ccd3_acisf11641_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Wed Sep 28 19:44:22 2011] Size of ../../acisf11641/products/events/fullrun_ccd3_acisf11641_pi14-548_pass1_cl_src2_src.evt.gz[events] = 33 counts
[Wed Sep 28 19:44:22 2011] Mean chipx,y = (636.70, 827.06)
[Wed Sep 28 19:44:22 2011] Mean tdetx,y = (4304.94, 3697.70)
[Wed Sep 28 19:44:22 2011] chipx,y range = (623.00-656.00, 813.00-846.00)
[Wed Sep 28 19:44:22 2011] Size of ../../acisf11641/products/events/fullrun_ccd3_acisf11641_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 2 counts
[Wed Sep 28 19:44:22 2011] ../../acisf11641/products/images/fullrun_ccd3_acisf11641_pi14-548_pass1_cl_src2_src.img and ../../acisf11641/products/images/fullrun_ccd3_acisf11641_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Wed Sep 28 19:44:22 2011] Not generating rmf since there are only 32 counts
[Wed Sep 28 19:44:22 2011] arf not found, will run specextract
[Wed Sep 28 19:44:55 2011] ../../acisf11641/products/spectra/fullrun_ccd3_acisf11641_pi14-548_pass1_cl_src2.warf not found
[Wed Sep 28 19:44:55 2011] ../../acisf11641/products/spectra/fullrun_ccd3_acisf11641_pi14-548_pass1_cl_src2.wrmf not found
[Wed Sep 28 19:44:55 2011] Removal of ../../acisf11641/products/spectra/fullrun_ccd3_acisf11641_pi14-548_pass1_cl_src2.soff failed
[Wed Sep 28 19:45:00 2011] ../../acisf11641/products/lightcurves/fullrun_ccd3_acisf11641_pi14-548_pass1_cl_src2_src.lc and ../../acisf11641/products/lightcurves/fullrun_ccd3_acisf11641_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Wed Sep 28 19:46:47 2011] Spectrum 2 has only 32 counts, deleting rmf
[Wed Sep 28 19:46:47 2011] 179.916
[Wed Sep 28 19:46:49 2011] Updating aperture counts using extracted products
[Wed Sep 28 19:46:49 2011] Error reading totcts from fullrun_ccd3_acisf11641_pi14-548_pass1_cl_src2_src.pi.gz
[Wed Sep 28 19:46:49 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 19:46:49 2011] Using photon index=1.80, rate=0.00649, arf fullrun_ccd3_acisf11641_pi14-548_pass1_cl_src2.arf
[Wed Sep 28 19:46:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 19:46:49 2011] Updating source flux to 8.3e-14
[Wed Sep 28 19:46:53 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Sep 28 19:46:54 2011] acisf11641/analysis//spectral/fullrun_ccd3_acisf11641_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete