[Sun Feb 26 16:54:06 2012] Detection parameters:
  Position = (1005.7, 423.1) = 16 39 12.04 29 42 50.4
  Extent = 0.8" x 0.6", rotation angle = 137 degrees
  Source counts = 204.3 +/- 15.0
  Background counts = 20.7
  Rate = 0.007 +/- 0.0005

[Sun Feb 26 16:54:07 2012] Off-axis axis estimate = 7.64'
[Sun Feb 26 17:17:25 2012] Using EEF radius (= 2.59 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 17:17:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 26 17:17:25 2012] Initial guess for spatial extent in simple fitting = 2.59"
[Sun Feb 26 17:17:25 2012] source mask rpix=5.3, npix_max = 132, mask sum = 132, frac = 0.996
[Sun Feb 26 17:17:25 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 2.59"
[Sun Feb 26 17:32:35 2012] fullrun_ccd6_acisf11592_pi14-548_cl_pass0_src1.ximg exists
[Sun Feb 26 17:32:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11592_pi14-548_cl_pass0_src1.csv
[Sun Feb 26 17:32:35 2012] fullrun_ccd6_acisf11592_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Feb 26 17:32:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11592_pi14-548_cl_pass0_src1.csv
[Sun Feb 26 17:32:35 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11592_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11592_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 17:32:35 2012] fullrun_ccd6_acisf11592_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Feb 26 17:32:35 2012] fullrun_ccd6_acisf11592_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Feb 26 17:32:35 2012] Fit fullrun_ccd6_acisf11592_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Feb 26 17:45:37 2012] Spatial fit model total counts = 424.142000, observed total counts = 428.000000
[Sun Feb 26 17:45:37 2012] Offset between fit and detection position for source 1 = 3.882201 pixels
[Sun Feb 26 17:45:37 2012] 425.114230 total counts/ 8.560230 bgd. counts: snr = 142.373313
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 3.882201 pixels
  Position = (1008.5, 420.5) = 16 39 11.95 29 42 48.8
  Extent = 3.4 (3.1-3.7)", rotation angle = 0
  Source counts = 416.6 +/- 20.6
  Background counts = 8.6
  Rate = 0.01 +/- 0.0007
[Sun Feb 26 17:45:37 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 17:45:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 17:45:37 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 17:45:37 2012] Source does appear to be extended
[Sun Feb 26 17:45:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 17:45:37 2012] Source is confused with source 19
[Sun Feb 26 18:08:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 18:08:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 26 18:08:13 2012] Initial guess for spatial extent in simple fitting = 3.41"
[Sun Feb 26 18:08:13 2012] source mask rpix=6.9, npix_max = 221, mask sum = 225, frac = 1.017
[Sun Feb 26 18:08:13 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 3.41"
[Sun Feb 26 18:27:20 2012] fullrun_ccd6_acisf11592_pi14-548_cl_pass1_src1.ximg exists
[Sun Feb 26 18:27:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11592_pi14-548_cl_pass1_src1.csv
[Sun Feb 26 18:27:20 2012] fullrun_ccd6_acisf11592_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Feb 26 18:27:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11592_pi14-548_cl_pass1_src1.csv
[Sun Feb 26 18:27:20 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11592_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11592_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 18:27:20 2012] fullrun_ccd6_acisf11592_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Feb 26 18:27:20 2012] fullrun_ccd6_acisf11592_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Feb 26 18:27:20 2012] Fit fullrun_ccd6_acisf11592_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Feb 26 18:39:17 2012] Spatial fit model total counts = 446.171000, observed total counts = 446.000000
[Sun Feb 26 18:39:17 2012] Offset between fit and detection position for source 1 = 0.186651 pixels
[Sun Feb 26 18:39:17 2012] 446.324600 total counts/ 26.222600 bgd. counts: snr = 82.038342
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.186651 pixels
  Position = (1008.6, 420.6) = 16 39 11.95 29 42 48.9
  Extent = 3.4 (3.1-3.6)", rotation angle = 0
  Source counts = 420.1 +/- 21.1
  Background counts = 26.2
  Rate = 0.01 +/- 0.0007
[Sun Feb 26 18:39:17 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 18:39:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 18:39:17 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 18:39:17 2012] Source does appear to be extended
[Sun Feb 26 18:39:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 18:42:55 2012] Writing source region out to fullrun_ccd6_acisf11592_pi14-548_pass1_cl_src1_src.reg
[Sun Feb 26 18:42:55 2012] Extracting stamp from image fullrun_ccd6_acisf11592_pi14-548_cl_sm2.00.img.gz, (854, 266) - (1163, 575)
[Sun Feb 26 18:42:55 2012] Writing fullrun_ccd6_acisf11592_pi14-548_pass1_cl_src1.gif
[Sun Feb 26 18:42:57 2012] Size of ../../acisf11592/products/events/fullrun_ccd6_acisf11592_pi14-548_pass1_cl_src1_src.evt.gz[events] = 439 counts
[Sun Feb 26 18:42:57 2012] Mean chipx,y = (405.23, 944.52)
[Sun Feb 26 18:42:57 2012] Mean tdetx,y = (3280.23, 2646.52)
[Sun Feb 26 18:42:57 2012] chipx,y range = (370.00-441.00, 912.00-979.00)
[Sun Feb 26 18:42:57 2012] Size of ../../acisf11592/products/events/fullrun_ccd6_acisf11592_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 255 counts
[Sun Feb 26 18:42:58 2012] rmf not found, will run specextract
[Sun Feb 26 18:42:58 2012] arf not found, will run specextract
[Sun Feb 26 18:43:33 2012] ../../acisf11592/products/spectra/fullrun_ccd6_acisf11592_pi14-548_pass1_cl_src1.warf not found
[Sun Feb 26 18:43:33 2012] ../../acisf11592/products/spectra/fullrun_ccd6_acisf11592_pi14-548_pass1_cl_src1.wrmf not found
[Sun Feb 26 18:43:33 2012] Removal of ../../acisf11592/products/spectra/fullrun_ccd6_acisf11592_pi14-548_pass1_cl_src1.soff failed
[Sun Feb 26 18:51:15 2012] Keeping rmf generated by specextract
[Sun Feb 26 18:51:15 2012] 172.853
[Sun Feb 26 18:55:41 2012] Updating aperture counts using extracted products
[Sun Feb 26 18:55:41 2012] Error reading totcts from fullrun_ccd6_acisf11592_pi14-548_pass1_cl_src1_src.pi.gz
[Sun Feb 26 18:55:41 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 18:55:41 2012] Using photon index=1.80, rate=0.0141, arf fullrun_ccd6_acisf11592_pi14-548_pass1_cl_src1.arf
[Sun Feb 26 18:55:41 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Feb 26 18:55:41 2012] Updating source flux to 1.8e-13
[Sun Feb 26 18:55:53 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Sun Feb 26 18:55:57 2012] Reading fit data from acisf11592/analysis//spectral/fullrun_ccd6_acisf11592_pi14-548_pass1_cl_src1_pl.csv
[Sun Feb 26 18:55:57 2012] Spectral fit parameter nH value = 2.55356e+14
[Sun Feb 26 18:55:57 2012] Spectral fit parameter PhoIndex value = 1.60077
[Sun Feb 26 18:55:57 2012] Failed to get F(0.3-8.0) from acisf11592/analysis//spectral/fullrun_ccd6_acisf11592_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Feb 26 18:55:57 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 18:55:57 2012] Using Nh = 2.6e+14, photon index=1.60, rate=0.0141, arf fullrun_ccd6_acisf11592_pi14-548_pass1_cl_src1.arf
[Sun Feb 26 18:55:57 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Feb 26 18:55:57 2012] Updating source flux to 2e-13