[Mon Feb 27 15:11:03 2012] Detection parameters:
  Position = (707.6, 892.3) = 10 47 2.57 54 5 51.4
  Extent = 0.7" x 0.5", rotation angle = 138 degrees
  Source counts = 24.2 +/- 5.0
  Background counts = 0.8
  Rate = 0.002 +/- 0.0003

[Mon Feb 27 15:11:04 2012] Off-axis axis estimate = 3.61'
[Mon Feb 27 15:34:21 2012] Using EEF radius (= 0.72 ")to estimate initial spatial extent for simple fitting
[Mon Feb 27 15:34:21 2012] Initial guess for spatial extent in simple fitting = 0.72"
[Mon Feb 27 15:34:21 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.035
[Mon Feb 27 15:34:21 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 0.72"
[Mon Feb 27 15:51:45 2012] fullrun_ccd7_acisf11584_pi14-548_cl_pass0_src6.ximg exists
[Mon Feb 27 15:51:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11584_pi14-548_cl_pass0_src6.csv
[Mon Feb 27 15:51:45 2012] fullrun_ccd7_acisf11584_pi14-548_cl_pass0_src6_1.ximg exists
[Mon Feb 27 15:51:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11584_pi14-548_cl_pass0_src6.csv
[Mon Feb 27 15:51:45 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11584_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11584_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 15:51:45 2012] fullrun_ccd7_acisf11584_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Mon Feb 27 15:51:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11584_pi14-548_cl_pass0_tfrozen_src6.csv
[Mon Feb 27 15:51:45 2012] fullrun_ccd7_acisf11584_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Feb 27 15:51:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11584_pi14-548_cl_pass0_tfrozen_src6.csv
[Mon Feb 27 15:51:45 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11584_pi14-548_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11584_pi14-548_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 15:51:50 2012] Spatial fit model total counts = 23.818200, observed total counts = 26.000000
[Mon Feb 27 15:51:50 2012] Offset between fit and detection position for source 5 = 0.765947 pixels
[Mon Feb 27 15:51:50 2012] 23.781032 total counts/ 0.006232 bgd. counts: snr = 301.169139
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.765947 pixels
  Position = (708.0, 893.0) = 10 47 2.58 54 5 51.4
  Extent = 0.9 (0.7-1.2)" x 0.5 (0.4-0.7)", rotation angle = 218 (192-241) degrees
  Source counts = 23.8 +/- 4.9
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Mon Feb 27 15:51:50 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 15:51:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 15:51:50 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 15:51:50 2012] Source does appear to be extended
[Mon Feb 27 15:51:50 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.01
[Mon Feb 27 16:16:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 27 16:16:48 2012] Initial guess for spatial extent in simple fitting = 0.71"
[Mon Feb 27 16:16:48 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.070
[Mon Feb 27 16:16:48 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 0.71"
[Mon Feb 27 16:34:17 2012] fullrun_ccd7_acisf11584_pi14-548_cl_pass1_src6.ximg exists
[Mon Feb 27 16:34:17 2012] fullrun_ccd7_acisf11584_pi14-548_cl_pass1_src6_1.ximg exists
[Mon Feb 27 16:34:17 2012] Fit fullrun_ccd7_acisf11584_pi14-548_cl_pass1_src6 appears to have run properly
[Mon Feb 27 16:34:17 2012] fullrun_ccd7_acisf11584_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Mon Feb 27 16:34:17 2012] fullrun_ccd7_acisf11584_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Mon Feb 27 16:34:17 2012] Fit fullrun_ccd7_acisf11584_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Mon Feb 27 16:34:22 2012] Spatial fit model total counts = 23.332900, observed total counts = 25.000000
[Mon Feb 27 16:34:22 2012] Offset between fit and detection position for source 5 = 0.231150 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.231150 pixels
  Position = (708.2, 892.9) = 10 47 2.57 54 5 51.4
  Extent = 0.9 (0.7-1.2)" x 0.5 (0.4-0.7)", rotation angle = 44 (22-62) degrees
  Source counts = 23.3 +/- 4.8
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Mon Feb 27 16:34:22 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 16:34:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 16:34:22 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 16:34:22 2012] Source does appear to be extended
[Mon Feb 27 16:34:22 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.06
[Mon Feb 27 16:44:11 2012] Writing source region out to fullrun_ccd7_acisf11584_pi14-548_pass1_cl_src5_src.reg
[Mon Feb 27 16:44:11 2012] Extracting stamp from image fullrun_ccd7_acisf11584_pi14-548_cl_sm2.00.img.gz, (665, 850) - (751, 936)
[Mon Feb 27 16:44:11 2012] Writing fullrun_ccd7_acisf11584_pi14-548_pass1_cl_src5.gif
[Mon Feb 27 16:45:34 2012] Size of ../../acisf11584/products/events/fullrun_ccd7_acisf11584_pi14-548_pass1_cl_src5_src.evt.gz[events] = 24 counts
[Mon Feb 27 16:45:34 2012] Mean chipx,y = (534.62, 227.38)
[Mon Feb 27 16:45:34 2012] Mean tdetx,y = (4451.62, 1929.38)
[Mon Feb 27 16:45:34 2012] chipx,y range = (515.00-551.00, 207.00-240.00)
[Mon Feb 27 16:45:34 2012] Size of ../../acisf11584/products/events/fullrun_ccd7_acisf11584_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 36 counts
[Mon Feb 27 16:45:35 2012] Not generating rmf since there are only 23 counts
[Mon Feb 27 16:45:35 2012] arf not found, will run specextract
[Mon Feb 27 16:45:42 2012] ../../acisf11584/products/spectra/fullrun_ccd7_acisf11584_pi14-548_pass1_cl_src5.warf not found
[Mon Feb 27 16:45:42 2012] ../../acisf11584/products/spectra/fullrun_ccd7_acisf11584_pi14-548_pass1_cl_src5.wrmf not found
[Mon Feb 27 16:45:42 2012] Removal of ../../acisf11584/products/spectra/fullrun_ccd7_acisf11584_pi14-548_pass1_cl_src5.soff failed
[Mon Feb 27 16:51:20 2012] Spectrum 5 has only 23 counts, deleting rmf
[Mon Feb 27 16:51:20 2012] 224.105
[Mon Feb 27 16:51:23 2012] Updating aperture counts using extracted products
[Mon Feb 27 16:51:23 2012] Error reading totcts from fullrun_ccd7_acisf11584_pi14-548_pass1_cl_src5_src.pi.gz
[Mon Feb 27 16:51:23 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 16:51:23 2012] Using photon index=1.80, rate=0.0015, arf fullrun_ccd7_acisf11584_pi14-548_pass1_cl_src5.arf
[Mon Feb 27 16:51:23 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Feb 27 16:51:23 2012] Updating source flux to 1.2e-14
[Mon Feb 27 16:51:28 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Feb 27 16:51:29 2012] acisf11584/analysis//spectral/fullrun_ccd7_acisf11584_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete