[Tue Oct 18 12:29:58 2011] Detection parameters:
  Position = (783.1, 850.0) = 5 40 50.75 -28 39 49.0
  Extent = 0.5" x 0.5", rotation angle = 128 degrees
  Source counts = 18.3 +/- 4.4
  Background counts = 0.7
  Rate = 0.0008 +/- 0.0002

[Tue Oct 18 12:29:59 2011] Off-axis axis estimate = 1.58'
[Tue Oct 18 12:30:39 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 12:30:39 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Tue Oct 18 12:30:39 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.585
[Tue Oct 18 12:30:39 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 0.40"
[Tue Oct 18 12:30:40 2011] fullrun_ccd7_acisf11580_pi14-548_cl_pass0_src14.ximg exists
[Tue Oct 18 12:30:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11580_pi14-548_cl_pass0_src14.csv
[Tue Oct 18 12:30:40 2011] fullrun_ccd7_acisf11580_pi14-548_cl_pass0_src14_1.ximg exists
[Tue Oct 18 12:30:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11580_pi14-548_cl_pass0_src14.csv
[Tue Oct 18 12:30:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11580_pi14-548_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11580_pi14-548_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 12:30:41 2011] fullrun_ccd7_acisf11580_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Tue Oct 18 12:30:41 2011] fullrun_ccd7_acisf11580_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Tue Oct 18 12:30:41 2011] Fit fullrun_ccd7_acisf11580_pi14-548_cl_pass0_tfrozen_src14 appears to have run properly
[Tue Oct 18 12:30:49 2011] Spatial fit model total counts = 23.813700, observed total counts = 24.000000
[Tue Oct 18 12:30:49 2011] Offset between fit and detection position for source 11 = 0.674686 pixels
[Tue Oct 18 12:30:49 2011] 24.118220 total counts/ 5.848720 bgd. counts: snr = 7.554335
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.674686 pixels
  Position = (783.5, 850.5) = 5 40 50.75 -28 39 49.0
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 18.3 +/- 4.9
  Background counts = 5.8
  Rate = 0.0008 +/- 0.0002
[Tue Oct 18 12:30:49 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 12:30:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 12:30:49 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 12:30:49 2011] Source does appear to be extended
[Tue Oct 18 12:30:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 12:31:06 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 12:31:06 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Tue Oct 18 12:31:06 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.250
[Tue Oct 18 12:31:06 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 0.41"
[Tue Oct 18 12:31:07 2011] fullrun_ccd7_acisf11580_pi14-548_cl_pass1_src14.ximg exists
[Tue Oct 18 12:31:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11580_pi14-548_cl_pass1_src14.csv
[Tue Oct 18 12:31:07 2011] fullrun_ccd7_acisf11580_pi14-548_cl_pass1_src14_1.ximg exists
[Tue Oct 18 12:31:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11580_pi14-548_cl_pass1_src14.csv
[Tue Oct 18 12:31:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11580_pi14-548_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11580_pi14-548_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 12:31:08 2011] fullrun_ccd7_acisf11580_pi14-548_cl_pass1_tfrozen_src14.ximg exists
[Tue Oct 18 12:31:08 2011] fullrun_ccd7_acisf11580_pi14-548_cl_pass1_tfrozen_src14_1.ximg exists
[Tue Oct 18 12:31:08 2011] Fit fullrun_ccd7_acisf11580_pi14-548_cl_pass1_tfrozen_src14 appears to have run properly
[Tue Oct 18 12:31:15 2011] Spatial fit model total counts = 23.439600, observed total counts = 24.000000
[Tue Oct 18 12:31:15 2011] Offset between fit and detection position for source 11 = 0.026071 pixels
[Tue Oct 18 12:31:15 2011] 23.740740 total counts/ 5.770840 bgd. counts: snr = 7.480423
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.026071 pixels
  Position = (783.5, 850.5) = 5 40 50.75 -28 39 49.0
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 18.0 +/- 4.9
  Background counts = 5.8
  Rate = 0.0008 +/- 0.0002
[Tue Oct 18 12:31:15 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 12:31:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 12:31:15 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 12:31:15 2011] Source does appear to be extended
[Tue Oct 18 12:31:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 12:32:32 2011] Not overwriting source region fullrun_ccd7_acisf11580_pi14-548_pass1_cl_src11_src.reg
[Tue Oct 18 12:32:32 2011] Extracting stamp from image fullrun_ccd7_acisf11580_pi14-548_cl_sm2.00.img.gz, (764, 831) - (803, 870)
[Tue Oct 18 12:32:33 2011] Writing fullrun_ccd7_acisf11580_pi14-548_pass1_cl_src11.gif
[Tue Oct 18 12:33:11 2011] ../../acisf11580/products/events/fullrun_ccd7_acisf11580_pi14-548_pass1_cl_src11_src.evt and ../../acisf11580/products/events/fullrun_ccd7_acisf11580_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Tue Oct 18 12:33:11 2011] Size of ../../acisf11580/products/events/fullrun_ccd7_acisf11580_pi14-548_pass1_cl_src11_src.evt.gz[events] = 19 counts
[Tue Oct 18 12:33:11 2011] Mean chipx,y = (374.00, 553.16)
[Tue Oct 18 12:33:11 2011] Mean tdetx,y = (4291.00, 2255.16)
[Tue Oct 18 12:33:11 2011] chipx,y range = (356.00-390.00, 536.00-572.00)
[Tue Oct 18 12:33:11 2011] Size of ../../acisf11580/products/events/fullrun_ccd7_acisf11580_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 9 counts
[Tue Oct 18 12:33:11 2011] ../../acisf11580/products/images/fullrun_ccd7_acisf11580_pi14-548_pass1_cl_src11_src.img and ../../acisf11580/products/images/fullrun_ccd7_acisf11580_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Tue Oct 18 12:33:11 2011] ../../acisf11580/products/spectra/fullrun_ccd7_acisf11580_pi14-548_pass1_cl_src11_src.pi and ../../acisf11580/products/spectra/fullrun_ccd7_acisf11580_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Tue Oct 18 12:33:11 2011] Not generating rmf since there are only 17 counts
[Tue Oct 18 12:33:14 2011] ../../acisf11580/products/lightcurves/fullrun_ccd7_acisf11580_pi14-548_pass1_cl_src11_src.lc and ../../acisf11580/products/lightcurves/fullrun_ccd7_acisf11580_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Tue Oct 18 12:33:52 2011] 233.263
[Tue Oct 18 12:33:55 2011] Updating aperture counts using extracted products
[Tue Oct 18 12:33:55 2011] Error reading totcts from fullrun_ccd7_acisf11580_pi14-548_pass1_cl_src11_src.pi.gz
[Tue Oct 18 12:33:55 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 12:33:55 2011] Using photon index=1.80, rate=0.00079, arf fullrun_ccd7_acisf11580_pi14-548_pass1_cl_src11.arf
[Tue Oct 18 12:33:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 12:33:55 2011] Updating source flux to 5.9e-15
[Tue Oct 18 12:34:02 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting