[Tue Oct 18 12:29:56 2011] Detection parameters: Position = (505.6, 1150.5) = 5 40 34.18 -28 31 9.7 Extent = 1.8" x 1.6", rotation angle = 99 degrees Source counts = 159.0 +/- 13.4 Background counts = 20.0 Rate = 0.007 +/- 0.0006 [Tue Oct 18 12:29:56 2011] Off-axis axis estimate = 8.21' [Tue Oct 18 12:30:38 2011] Using EEF radius (= 2.98 ")to estimate initial spatial extent for simple fitting [Tue Oct 18 12:30:38 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Tue Oct 18 12:30:38 2011] Initial guess for spatial extent in simple fitting = 2.98" [Tue Oct 18 12:30:38 2011] source mask rpix=6.1, npix_max = 172, mask sum = 169, frac = 0.982 [Tue Oct 18 12:30:38 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.98" [Tue Oct 18 12:30:39 2011] fullrun_ccd6_acisf11580_pi14-548_cl_pass0_src1.ximg exists [Tue Oct 18 12:30:39 2011] fullrun_ccd6_acisf11580_pi14-548_cl_pass0_src1_1.ximg exists [Tue Oct 18 12:30:39 2011] Fit fullrun_ccd6_acisf11580_pi14-548_cl_pass0_src1 appears to have run properly [Tue Oct 18 12:30:39 2011] fullrun_ccd6_acisf11580_pi14-548_cl_pass0_tfrozen_src1.ximg exists [Tue Oct 18 12:30:39 2011] fullrun_ccd6_acisf11580_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists [Tue Oct 18 12:30:39 2011] Fit fullrun_ccd6_acisf11580_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly [Tue Oct 18 12:30:45 2011] Spatial fit model total counts = 188.795000, observed total counts = 189.000000 [Tue Oct 18 12:30:45 2011] Offset between fit and detection position for source 2 = 1.545612 pixels [Tue Oct 18 12:30:45 2011] 189.247600 total counts/ 18.971600 bgd. counts: snr = 39.093221 Spatial fit parameters: Offset between fit and detection position for source 2 = 1.545612 pixels Position = (505.9, 1152.0) = 5 40 34.19 -28 31 9.2 Extent = 3.7 (3.2-4.3)", rotation angle = 0 Source counts = 170.3 +/- 13.8 Background counts = 19.0 Rate = 0.007 +/- 0.0006 [Tue Oct 18 12:30:45 2011] Vigneting correction estimate = 1.000000 [Tue Oct 18 12:30:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Oct 18 12:30:45 2011] Assessing source extent using major axis lower bound [Tue Oct 18 12:30:45 2011] Source does appear to be extended [Tue Oct 18 12:30:45 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Oct 18 12:31:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Tue Oct 18 12:31:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Tue Oct 18 12:31:05 2011] Initial guess for spatial extent in simple fitting = 3.69" [Tue Oct 18 12:31:05 2011] source mask rpix=7.5, npix_max = 256, mask sum = 256, frac = 0.999 [Tue Oct 18 12:31:05 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.69" [Tue Oct 18 12:31:06 2011] fullrun_ccd6_acisf11580_pi14-548_cl_pass1_src1.ximg exists [Tue Oct 18 12:31:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11580_pi14-548_cl_pass1_src1.csv [Tue Oct 18 12:31:06 2011] fullrun_ccd6_acisf11580_pi14-548_cl_pass1_src1_1.ximg exists [Tue Oct 18 12:31:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11580_pi14-548_cl_pass1_src1.csv [Tue Oct 18 12:31:06 2011] It looks like the fit did not converge You should probably delete fullrun_ccd6_acisf11580_pi14-548_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd6_acisf11580_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Oct 18 12:31:06 2011] fullrun_ccd6_acisf11580_pi14-548_cl_pass1_tfrozen_src1.ximg exists [Tue Oct 18 12:31:06 2011] fullrun_ccd6_acisf11580_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists [Tue Oct 18 12:31:06 2011] Fit fullrun_ccd6_acisf11580_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly [Tue Oct 18 12:31:12 2011] Spatial fit model total counts = 198.768000, observed total counts = 199.000000 [Tue Oct 18 12:31:12 2011] Offset between fit and detection position for source 2 = 0.518325 pixels [Tue Oct 18 12:31:12 2011] 198.364700 total counts/ 23.662700 bgd. counts: snr = 35.914161 Spatial fit parameters: Offset between fit and detection position for source 2 = 0.518325 pixels Position = (506.1, 1152.5) = 5 40 34.18 -28 31 8.9 Extent = 3.7 (3.4-4.2)", rotation angle = 0 Source counts = 174.7 +/- 14.1 Background counts = 23.7 Rate = 0.008 +/- 0.0006 [Tue Oct 18 12:31:12 2011] Vigneting correction estimate = 1.000000 [Tue Oct 18 12:31:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Oct 18 12:31:12 2011] Assessing source extent using major axis lower bound [Tue Oct 18 12:31:12 2011] Source does appear to be extended [Tue Oct 18 12:31:12 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Oct 18 12:31:54 2011] Not overwriting source region fullrun_ccd6_acisf11580_pi14-548_pass1_cl_src2_src.reg [Tue Oct 18 12:31:54 2011] Extracting stamp from image fullrun_ccd6_acisf11580_pi14-548_cl_sm2.00.img.gz, (336, 983) - (676, 1322) [Tue Oct 18 12:31:54 2011] Writing fullrun_ccd6_acisf11580_pi14-548_pass1_cl_src2.gif [Tue Oct 18 12:31:55 2011] ../../acisf11580/products/events/fullrun_ccd6_acisf11580_pi14-548_pass1_cl_src2_src.evt and ../../acisf11580/products/events/fullrun_ccd6_acisf11580_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create [Tue Oct 18 12:31:55 2011] Size of ../../acisf11580/products/events/fullrun_ccd6_acisf11580_pi14-548_pass1_cl_src2_src.evt.gz[events] = 191 counts [Tue Oct 18 12:31:55 2011] Mean chipx,y = (353.51, 984.68) [Tue Oct 18 12:31:55 2011] Mean tdetx,y = (3228.51, 2686.68) [Tue Oct 18 12:31:55 2011] chipx,y range = (317.00-393.00, 945.00-1022.00) [Tue Oct 18 12:31:55 2011] Size of ../../acisf11580/products/events/fullrun_ccd6_acisf11580_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 135 counts [Tue Oct 18 12:31:55 2011] ../../acisf11580/products/images/fullrun_ccd6_acisf11580_pi14-548_pass1_cl_src2_src.img and ../../acisf11580/products/images/fullrun_ccd6_acisf11580_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create [Tue Oct 18 12:31:55 2011] ../../acisf11580/products/spectra/fullrun_ccd6_acisf11580_pi14-548_pass1_cl_src2_src.pi and ../../acisf11580/products/spectra/fullrun_ccd6_acisf11580_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create [Tue Oct 18 12:31:57 2011] ../../acisf11580/products/lightcurves/fullrun_ccd6_acisf11580_pi14-548_pass1_cl_src2_src.lc and ../../acisf11580/products/lightcurves/fullrun_ccd6_acisf11580_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create [Tue Oct 18 12:32:32 2011] Keeping rmf generated by specextract [Tue Oct 18 12:32:32 2011] 169.034 [Tue Oct 18 12:33:54 2011] Updating aperture counts using extracted products [Tue Oct 18 12:33:54 2011] Error reading totcts from fullrun_ccd6_acisf11580_pi14-548_pass1_cl_src2_src.pi.gz [Tue Oct 18 12:33:54 2011] Calculating source flux in energy range 0.30-8.00 [Tue Oct 18 12:33:54 2011] Using photon index=1.80, rate=0.00768, arf fullrun_ccd6_acisf11580_pi14-548_pass1_cl_src2.arf [Tue Oct 18 12:33:54 2011] Assuming count rate is from the 0.20-8.00 bandpass [Tue Oct 18 12:33:54 2011] Updating source flux to 1e-13 [Tue Oct 18 12:34:02 2011] Reading fit data from acisf11580/analysis//spectral/fullrun_ccd6_acisf11580_pi14-548_pass1_cl_src2_pl.csv [Tue Oct 18 12:34:02 2011] Spectral fit parameter nH value = 9.74012e+20 [Tue Oct 18 12:34:02 2011] Spectral fit parameter PhoIndex value = 1.90812 [Tue Oct 18 12:34:02 2011] Failed to get F(0.3-8.0) from acisf11580/analysis//spectral/fullrun_ccd6_acisf11580_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected [Tue Oct 18 12:34:02 2011] Calculating source flux in energy range 0.30-8.00 [Tue Oct 18 12:34:02 2011] Using Nh = 9.7e+20, photon index=1.91, rate=0.00768, arf fullrun_ccd6_acisf11580_pi14-548_pass1_cl_src2.arf [Tue Oct 18 12:34:02 2011] Assuming count rate is from the 0.20-8.00 bandpass [Tue Oct 18 12:34:02 2011] Updating source flux to 9.7e-14