[Tue Oct 18 12:29:56 2011] Detection parameters:
  Position = (559.7, 220.1) = 5 40 32.15 -28 38 47.4
  Extent = 0.6" x 0.5", rotation angle = 133 degrees
  Source counts = 13.5 +/- 3.7
  Background counts = 0.5
  Rate = 0.0006 +/- 0.0002

[Tue Oct 18 12:29:56 2011] Off-axis axis estimate = 2.70'
[Tue Oct 18 12:30:38 2011] Using EEF radius (= 0.52 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 12:30:38 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Tue Oct 18 12:30:38 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.917
[Tue Oct 18 12:30:38 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 0.52"
[Tue Oct 18 12:30:39 2011] fullrun_ccd6_acisf11580_pi14-548_cl_pass0_src7.ximg exists
[Tue Oct 18 12:30:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11580_pi14-548_cl_pass0_src7.csv
[Tue Oct 18 12:30:39 2011] fullrun_ccd6_acisf11580_pi14-548_cl_pass0_src7_1.ximg exists
[Tue Oct 18 12:30:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11580_pi14-548_cl_pass0_src7.csv
[Tue Oct 18 12:30:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11580_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11580_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 12:30:39 2011] fullrun_ccd6_acisf11580_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Tue Oct 18 12:30:39 2011] fullrun_ccd6_acisf11580_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Oct 18 12:30:39 2011] Fit fullrun_ccd6_acisf11580_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Tue Oct 18 12:30:45 2011] Spatial fit model total counts = 16.338700, observed total counts = 17.000000
[Tue Oct 18 12:30:45 2011] Offset between fit and detection position for source 15 = 0.685484 pixels
[Tue Oct 18 12:30:45 2011] 17.069110 total counts/ 4.853510 bgd. counts: snr = 5.544812
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.685484 pixels
  Position = (559.9, 220.8) = 5 40 32.16 -28 38 47.3
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 12.2 +/- 4.1
  Background counts = 4.9
  Rate = 0.0005 +/- 0.0002
[Tue Oct 18 12:30:45 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 12:30:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 12:30:45 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 12:30:45 2011] Source does appear to be extended
[Tue Oct 18 12:30:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 12:31:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 12:31:05 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Tue Oct 18 12:31:05 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.128
[Tue Oct 18 12:31:05 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 0.56"
[Tue Oct 18 12:31:06 2011] fullrun_ccd6_acisf11580_pi14-548_cl_pass1_src6.ximg exists
[Tue Oct 18 12:31:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11580_pi14-548_cl_pass1_src6.csv
[Tue Oct 18 12:31:06 2011] fullrun_ccd6_acisf11580_pi14-548_cl_pass1_src6_1.ximg exists
[Tue Oct 18 12:31:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11580_pi14-548_cl_pass1_src6.csv
[Tue Oct 18 12:31:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11580_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11580_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 12:31:06 2011] fullrun_ccd6_acisf11580_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Tue Oct 18 12:31:06 2011] fullrun_ccd6_acisf11580_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Tue Oct 18 12:31:06 2011] Fit fullrun_ccd6_acisf11580_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Tue Oct 18 12:31:12 2011] Spatial fit model total counts = 17.957500, observed total counts = 18.000000
[Tue Oct 18 12:31:12 2011] Offset between fit and detection position for source 15 = 0.021473 pixels
[Tue Oct 18 12:31:12 2011] 18.502630 total counts/ 6.236530 bgd. counts: snr = 4.911736
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.021473 pixels
  Position = (559.9, 220.8) = 5 40 32.16 -28 38 47.3
  Extent = 0.5 (0.4-0.8)", rotation angle = 0
  Source counts = 12.3 +/- 4.3
  Background counts = 6.2
  Rate = 0.0005 +/- 0.0002
[Tue Oct 18 12:31:12 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 12:31:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 12:31:12 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 12:31:12 2011] Source does appear to be extended
[Tue Oct 18 12:31:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 12:31:54 2011] Not overwriting source region fullrun_ccd6_acisf11580_pi14-548_pass1_cl_src15_src.reg
[Tue Oct 18 12:31:54 2011] Extracting stamp from image fullrun_ccd6_acisf11580_pi14-548_cl_sm2.00.img.gz, (535, 196) - (584, 245)
[Tue Oct 18 12:31:54 2011] Writing fullrun_ccd6_acisf11580_pi14-548_pass1_cl_src15.gif
[Tue Oct 18 12:32:08 2011] ../../acisf11580/products/events/fullrun_ccd6_acisf11580_pi14-548_pass1_cl_src15_src.evt and ../../acisf11580/products/events/fullrun_ccd6_acisf11580_pi14-548_pass1_cl_src15_bgd.evt exist, delete to re-create
[Tue Oct 18 12:32:09 2011] Size of ../../acisf11580/products/events/fullrun_ccd6_acisf11580_pi14-548_pass1_cl_src15_src.evt.gz[events] = 13 counts
[Tue Oct 18 12:32:09 2011] Mean chipx,y = (977.15, 288.92)
[Tue Oct 18 12:32:09 2011] Mean tdetx,y = (3852.15, 1990.92)
[Tue Oct 18 12:32:09 2011] chipx,y range = (962.00-990.00, 271.00-305.00)
[Tue Oct 18 12:32:09 2011] Size of ../../acisf11580/products/events/fullrun_ccd6_acisf11580_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 8 counts
[Tue Oct 18 12:32:09 2011] ../../acisf11580/products/images/fullrun_ccd6_acisf11580_pi14-548_pass1_cl_src15_src.img and ../../acisf11580/products/images/fullrun_ccd6_acisf11580_pi14-548_pass1_cl_src15_bgd.img exist, delete to re-create
[Tue Oct 18 12:32:09 2011] ../../acisf11580/products/spectra/fullrun_ccd6_acisf11580_pi14-548_pass1_cl_src15_src.pi and ../../acisf11580/products/spectra/fullrun_ccd6_acisf11580_pi14-548_pass1_cl_src15_bgd.pi exist, delete to re-create
[Tue Oct 18 12:32:09 2011] Not generating rmf since there are only 12 counts
[Tue Oct 18 12:32:11 2011] ../../acisf11580/products/lightcurves/fullrun_ccd6_acisf11580_pi14-548_pass1_cl_src15_src.lc and ../../acisf11580/products/lightcurves/fullrun_ccd6_acisf11580_pi14-548_pass1_cl_src15_bgd.lc exist, delete to re-create
[Tue Oct 18 12:32:32 2011] 205.587
[Tue Oct 18 12:33:54 2011] Updating aperture counts using extracted products
[Tue Oct 18 12:33:54 2011] Error reading totcts from fullrun_ccd6_acisf11580_pi14-548_pass1_cl_src15_src.pi.gz
[Tue Oct 18 12:33:55 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 12:33:55 2011] Using photon index=1.80, rate=0.000539, arf fullrun_ccd6_acisf11580_pi14-548_pass1_cl_src15.arf
[Tue Oct 18 12:33:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 12:33:55 2011] Updating source flux to 5.9e-15
[Tue Oct 18 12:33:59 2011] Source 15 has fewer than 100.000000 counts, skipping spectral fitting