[Tue Oct 18 12:29:54 2011] Detection parameters:
  Position = (797.3, 276.9) = 5 41 31.06 -28 37 36.2
  Extent = 3.6" x 2.2", rotation angle = 169 degrees
  Source counts = 20.5 +/- 5.2
  Background counts = 6.5
  Rate = 0.0009 +/- 0.0002

[Tue Oct 18 12:29:54 2011] Off-axis axis estimate = 10.34'
[Tue Oct 18 12:30:36 2011] Using EEF radius (= 4.74 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 12:30:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct 18 12:30:36 2011] Initial guess for spatial extent in simple fitting = 4.74"
[Tue Oct 18 12:30:36 2011] source mask rpix=9.6, npix_max = 411, mask sum = 400, frac = 0.972
[Tue Oct 18 12:30:36 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 4.74"
[Tue Oct 18 12:30:37 2011] fullrun_ccd3_acisf11580_pi14-548_cl_pass0_src1.ximg exists
[Tue Oct 18 12:30:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11580_pi14-548_cl_pass0_src1.csv
[Tue Oct 18 12:30:37 2011] fullrun_ccd3_acisf11580_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Oct 18 12:30:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11580_pi14-548_cl_pass0_src1.csv
[Tue Oct 18 12:30:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11580_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11580_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 12:30:37 2011] fullrun_ccd3_acisf11580_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Oct 18 12:30:37 2011] fullrun_ccd3_acisf11580_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Oct 18 12:30:37 2011] Fit fullrun_ccd3_acisf11580_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Oct 18 12:30:44 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 55.482063 pixels away
[Tue Oct 18 12:30:44 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 12:30:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 12:30:44 2011] Assessing source extent using major
[Tue Oct 18 12:30:44 2011] Source does appear to be extended
[Tue Oct 18 12:30:44 2011] Computing asymmetry using major and minor axis, asym = 1.63
[Tue Oct 18 12:30:44 2011] Source is asymmetric
[Tue Oct 18 12:31:03 2011] Using EEF radius (= 4.74 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 12:31:03 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct 18 12:31:03 2011] Initial guess for spatial extent in simple fitting = 4.74"
[Tue Oct 18 12:31:03 2011] source mask rpix=9.6, npix_max = 411, mask sum = 400, frac = 0.972
[Tue Oct 18 12:31:03 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.74"
[Tue Oct 18 12:31:04 2011] fullrun_ccd3_acisf11580_pi14-548_cl_pass1_src1.ximg exists
[Tue Oct 18 12:31:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11580_pi14-548_cl_pass1_src1.csv
[Tue Oct 18 12:31:04 2011] fullrun_ccd3_acisf11580_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Oct 18 12:31:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11580_pi14-548_cl_pass1_src1.csv
[Tue Oct 18 12:31:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11580_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11580_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 12:31:04 2011] fullrun_ccd3_acisf11580_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Oct 18 12:31:04 2011] fullrun_ccd3_acisf11580_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Oct 18 12:31:04 2011] Fit fullrun_ccd3_acisf11580_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Oct 18 12:31:10 2011] Spatial fit model total counts = 49.770500, observed total counts = 49.000000
[Tue Oct 18 12:31:10 2011] Offset between fit and detection position for source 1 = 2.750068 pixels
[Tue Oct 18 12:31:10 2011] 49.814200 total counts/ 30.293500 bgd. counts: snr = 3.546669
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.750068 pixels
  Position = (799.8, 275.8) = 5 41 30.98 -28 37 36.9
  Extent = 2.8 (0.9-4.1)", rotation angle = 0
  Source counts = 19.5 +/- 7.1
  Background counts = 30.3
  Rate = 0.0009 +/- 0.0003
[Tue Oct 18 12:31:10 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 12:31:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 12:31:10 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 12:31:10 2011] Source does appear to be extended
[Tue Oct 18 12:31:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 12:31:28 2011] Not overwriting source region fullrun_ccd3_acisf11580_pi14-548_pass1_cl_src1_src.reg
[Tue Oct 18 12:31:28 2011] Extracting stamp from image fullrun_ccd3_acisf11580_pi14-548_cl_sm2.00.img.gz, (670, 146) - (930, 406)
[Tue Oct 18 12:31:28 2011] Writing fullrun_ccd3_acisf11580_pi14-548_pass1_cl_src1.gif
[Tue Oct 18 12:31:30 2011] ../../acisf11580/products/events/fullrun_ccd3_acisf11580_pi14-548_pass1_cl_src1_src.evt and ../../acisf11580/products/events/fullrun_ccd3_acisf11580_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Oct 18 12:31:30 2011] Size of ../../acisf11580/products/events/fullrun_ccd3_acisf11580_pi14-548_pass1_cl_src1_src.evt.gz[events] = 29 counts
[Tue Oct 18 12:31:30 2011] Mean chipx,y = (146.41, 271.34)
[Tue Oct 18 12:31:30 2011] Mean tdetx,y = (4860.66, 3207.41)
[Tue Oct 18 12:31:30 2011] chipx,y range = (124.00-173.00, 249.00-301.00)
[Tue Oct 18 12:31:30 2011] Size of ../../acisf11580/products/events/fullrun_ccd3_acisf11580_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 109 counts
[Tue Oct 18 12:31:30 2011] ../../acisf11580/products/images/fullrun_ccd3_acisf11580_pi14-548_pass1_cl_src1_src.img and ../../acisf11580/products/images/fullrun_ccd3_acisf11580_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Oct 18 12:31:30 2011] ../../acisf11580/products/spectra/fullrun_ccd3_acisf11580_pi14-548_pass1_cl_src1_src.pi and ../../acisf11580/products/spectra/fullrun_ccd3_acisf11580_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Oct 18 12:31:30 2011] Not generating rmf since there are only 19 counts
[Tue Oct 18 12:31:32 2011] ../../acisf11580/products/lightcurves/fullrun_ccd3_acisf11580_pi14-548_pass1_cl_src1_src.lc and ../../acisf11580/products/lightcurves/fullrun_ccd3_acisf11580_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Oct 18 12:31:46 2011] 161.901
[Tue Oct 18 12:33:54 2011] Updating aperture counts using extracted products
[Tue Oct 18 12:33:54 2011] Error reading totcts from fullrun_ccd3_acisf11580_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Oct 18 12:33:54 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 12:33:54 2011] Using photon index=1.80, rate=0.000859, arf fullrun_ccd3_acisf11580_pi14-548_pass1_cl_src1.arf
[Tue Oct 18 12:33:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 12:33:54 2011] Updating source flux to 1.3e-14
[Tue Oct 18 12:33:57 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Oct 18 12:33:58 2011] acisf11580/analysis//spectral/fullrun_ccd3_acisf11580_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete