[Tue Apr 10 20:12:52 2012] Detection parameters:
  Position = (980.7, 614.1) = 3 15 45.88 -2 18 46.8
  Extent = 1.2" x 0.9", rotation angle = 123 degrees
  Source counts = 136.5 +/- 12.4
  Background counts = 17.5
  Rate = 0.005 +/- 0.0004

[Tue Apr 10 20:12:53 2012] Off-axis axis estimate = 7.51'
[Tue Apr 10 20:13:24 2012] Using EEF radius (= 2.50 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 20:13:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 20:13:24 2012] Initial guess for spatial extent in simple fitting = 2.50"
[Tue Apr 10 20:13:24 2012] source mask rpix=5.1, npix_max = 124, mask sum = 110, frac = 0.882
[Tue Apr 10 20:13:24 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 2.50"
[Tue Apr 10 20:13:25 2012] fullrun_ccd6_acisf11578_pi14-548_cl_pass0_src1.ximg exists
[Tue Apr 10 20:13:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11578_pi14-548_cl_pass0_src1.csv
[Tue Apr 10 20:13:25 2012] fullrun_ccd6_acisf11578_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Apr 10 20:13:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11578_pi14-548_cl_pass0_src1.csv
[Tue Apr 10 20:13:25 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11578_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11578_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 20:13:25 2012] fullrun_ccd6_acisf11578_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Apr 10 20:13:25 2012] fullrun_ccd6_acisf11578_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Apr 10 20:13:25 2012] Fit fullrun_ccd6_acisf11578_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Apr 10 20:13:30 2012] Spatial fit model total counts = 285.991000, observed total counts = 286.000000
[Tue Apr 10 20:13:30 2012] Offset between fit and detection position for source 1 = 2.787960 pixels
[Tue Apr 10 20:13:30 2012] 285.942400 total counts/ 31.174400 bgd. counts: snr = 45.629512
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.787960 pixels
  Position = (982.4, 611.9) = 3 15 45.84 -2 18 48.1
  Extent = 3.1 (2.8-3.5)", rotation angle = 0
  Source counts = 254.8 +/- 16.9
  Background counts = 31.2
  Rate = 0.009 +/- 0.0006
[Tue Apr 10 20:13:30 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 20:13:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 20:13:30 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 20:13:30 2012] Source does appear to be extended
[Tue Apr 10 20:13:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 20:13:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 20:13:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 20:13:45 2012] Initial guess for spatial extent in simple fitting = 3.11"
[Tue Apr 10 20:13:45 2012] source mask rpix=6.3, npix_max = 186, mask sum = 143, frac = 0.766
[Tue Apr 10 20:13:45 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 3.11"
[Tue Apr 10 20:13:45 2012] fullrun_ccd6_acisf11578_pi14-548_cl_pass1_src1.ximg exists
[Tue Apr 10 20:13:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11578_pi14-548_cl_pass1_src1.csv
[Tue Apr 10 20:13:45 2012] fullrun_ccd6_acisf11578_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Apr 10 20:13:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11578_pi14-548_cl_pass1_src1.csv
[Tue Apr 10 20:13:45 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11578_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11578_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 20:13:45 2012] fullrun_ccd6_acisf11578_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Apr 10 20:13:45 2012] fullrun_ccd6_acisf11578_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Apr 10 20:13:45 2012] Fit fullrun_ccd6_acisf11578_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Apr 10 20:13:53 2012] Spatial fit model total counts = 299.996000, observed total counts = 300.000000
[Tue Apr 10 20:13:53 2012] Offset between fit and detection position for source 1 = 0.355073 pixels
[Tue Apr 10 20:13:53 2012] 300.494800 total counts/ 34.161800 bgd. counts: snr = 45.567438
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.355073 pixels
  Position = (982.5, 611.6) = 3 15 45.84 -2 18 48.3
  Extent = 3.2 (2.9-3.6)", rotation angle = 0
  Source counts = 266.3 +/- 17.3
  Background counts = 34.2
  Rate = 0.009 +/- 0.0006
[Tue Apr 10 20:13:53 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 20:13:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 20:13:53 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 20:13:53 2012] Source does appear to be extended
[Tue Apr 10 20:13:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 20:14:05 2012] Not overwriting source region fullrun_ccd6_acisf11578_pi14-548_pass1_cl_src1_src.reg
[Tue Apr 10 20:14:05 2012] Extracting stamp from image fullrun_ccd6_acisf11578_pi14-548_cl_sm2.00.img.gz, (835, 464) - (1059, 760)
[Tue Apr 10 20:14:05 2012] Writing fullrun_ccd6_acisf11578_pi14-548_pass1_cl_src1.gif
[Tue Apr 10 20:14:09 2012] ../../acisf11578/products/events/fullrun_ccd6_acisf11578_pi14-548_pass1_cl_src1_src.evt and ../../acisf11578/products/events/fullrun_ccd6_acisf11578_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Apr 10 20:14:09 2012] Size of ../../acisf11578/products/events/fullrun_ccd6_acisf11578_pi14-548_pass1_cl_src1_src.evt.gz[events] = 298 counts
[Tue Apr 10 20:14:09 2012] Mean chipx,y = (434.85, 54.80)
[Tue Apr 10 20:14:09 2012] Mean tdetx,y = (3309.85, 1756.80)
[Tue Apr 10 20:14:09 2012] chipx,y range = (398.00-472.00, 19.00-86.00)
[Tue Apr 10 20:14:09 2012] Size of ../../acisf11578/products/events/fullrun_ccd6_acisf11578_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 254 counts
[Tue Apr 10 20:14:09 2012] ../../acisf11578/products/images/fullrun_ccd6_acisf11578_pi14-548_pass1_cl_src1_src.img and ../../acisf11578/products/images/fullrun_ccd6_acisf11578_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Apr 10 20:14:09 2012] ../../acisf11578/products/spectra/fullrun_ccd6_acisf11578_pi14-548_pass1_cl_src1_src.pi and ../../acisf11578/products/spectra/fullrun_ccd6_acisf11578_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Apr 10 20:14:12 2012] ../../acisf11578/products/lightcurves/fullrun_ccd6_acisf11578_pi14-548_pass1_cl_src1_src.lc and ../../acisf11578/products/lightcurves/fullrun_ccd6_acisf11578_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Apr 10 20:15:08 2012] Keeping rmf generated by specextract
[Tue Apr 10 20:15:08 2012] 165.148
[Tue Apr 10 20:16:10 2012] Updating aperture counts using extracted products
[Tue Apr 10 20:16:10 2012] Error reading totcts from fullrun_ccd6_acisf11578_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Apr 10 20:16:10 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 20:16:10 2012] Using photon index=1.80, rate=0.00898, arf fullrun_ccd6_acisf11578_pi14-548_pass1_cl_src1.arf
[Tue Apr 10 20:16:10 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Apr 10 20:16:10 2012] Updating source flux to 1.2e-13
[Tue Apr 10 20:16:21 2012] Reading fit data from acisf11578/analysis//spectral/fullrun_ccd6_acisf11578_pi14-548_pass1_cl_src1_pl.csv
[Tue Apr 10 20:16:21 2012] Spectral fit parameter nH value = 2.44574e+16
[Tue Apr 10 20:16:21 2012] Spectral fit parameter PhoIndex value = 1.70013
[Tue Apr 10 20:16:21 2012] Failed to get F(0.3-8.0) from acisf11578/analysis//spectral/fullrun_ccd6_acisf11578_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Apr 10 20:16:21 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 20:16:21 2012] Using Nh = 2.4e+16, photon index=1.70, rate=0.00898, arf fullrun_ccd6_acisf11578_pi14-548_pass1_cl_src1.arf
[Tue Apr 10 20:16:21 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Apr 10 20:16:21 2012] Updating source flux to 1.3e-13