[Sat Oct 15 22:16:11 2011] Detection parameters:
  Position = (247.1, 410.4) = 2 19 54.22 34 23 54.3
  Extent = 0.7" x 0.5", rotation angle = 78 degrees
  Source counts = 720.7 +/- 27.0
  Background counts = 8.3
  Rate = 0.02 +/- 0.0007

[Sat Oct 15 22:16:13 2011] Off-axis axis estimate = 3.43'
[Sat Oct 15 22:17:04 2011] Using EEF radius (= 0.68 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 22:17:04 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 15 22:17:04 2011] Initial guess for spatial extent in simple fitting = 0.68"
[Sat Oct 15 22:17:04 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.855
[Sat Oct 15 22:17:04 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.68"
[Sat Oct 15 22:17:06 2011] fullrun_ccd7_acisf11575_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 15 22:17:06 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf11575_pi14-548_cl_pass0_src1.csv
[Sat Oct 15 22:17:06 2011] fullrun_ccd7_acisf11575_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 15 22:17:06 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf11575_pi14-548_cl_pass0_src1.csv
[Sat Oct 15 22:17:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11575_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11575_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 22:17:06 2011] fullrun_ccd7_acisf11575_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 15 22:17:06 2011] fullrun_ccd7_acisf11575_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 15 22:17:06 2011] Fit fullrun_ccd7_acisf11575_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 15 22:17:15 2011] Spatial fit model total counts = 729.999000, observed total counts = 730.000000
[Sat Oct 15 22:17:15 2011] Offset between fit and detection position for source 1 = 0.663582 pixels
[Sat Oct 15 22:17:15 2011] 730.494900 total counts/ 17.493900 bgd. counts: snr = 170.469552
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.663582 pixels
  Position = (247.6, 410.8) = 2 19 54.22 34 23 54.3
  Extent = 0.8 (0.8-0.9)", rotation angle = 0
  Source counts = 713.0 +/- 27.0
  Background counts = 17.5
  Rate = 0.02 +/- 0.0007
[Sat Oct 15 22:17:15 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 22:17:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 22:17:15 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 22:17:15 2011] Source does appear to be extended
[Sat Oct 15 22:17:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 22:17:31 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 22:17:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 15 22:17:31 2011] Initial guess for spatial extent in simple fitting = 0.83"
[Sat Oct 15 22:17:31 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.055
[Sat Oct 15 22:17:31 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.83"
[Sat Oct 15 22:17:32 2011] fullrun_ccd7_acisf11575_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 15 22:17:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11575_pi14-548_cl_pass1_src1.csv
[Sat Oct 15 22:17:32 2011] fullrun_ccd7_acisf11575_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 15 22:17:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11575_pi14-548_cl_pass1_src1.csv
[Sat Oct 15 22:17:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11575_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11575_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 22:17:32 2011] fullrun_ccd7_acisf11575_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 15 22:17:33 2011] fullrun_ccd7_acisf11575_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 15 22:17:33 2011] Fit fullrun_ccd7_acisf11575_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 15 22:17:41 2011] Warning, spatial fit 1 centroid is now closest to src. 28
[Sat Oct 15 22:17:41 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 22:17:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 22:17:41 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 22:17:41 2011] Source does appear to be extended
[Sat Oct 15 22:17:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 22:28:18 2011] Not overwriting source region fullrun_ccd7_acisf11575_pi14-548_pass1_cl_src1_src.reg
[Sat Oct 15 22:28:18 2011] Extracting stamp from image fullrun_ccd7_acisf11575_pi14-548_cl_sm2.00.img.gz, (210, 373) - (285, 449)
[Sat Oct 15 22:28:18 2011] Writing fullrun_ccd7_acisf11575_pi14-548_pass1_cl_src1.gif
[Sat Oct 15 22:28:21 2011] ../../acisf11575/products/events/fullrun_ccd7_acisf11575_pi14-548_pass1_cl_src1_src.evt and ../../acisf11575/products/events/fullrun_ccd7_acisf11575_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Oct 15 22:28:21 2011] Size of ../../acisf11575/products/events/fullrun_ccd7_acisf11575_pi14-548_pass1_cl_src1_src.evt.gz[events] = 723 counts
[Sat Oct 15 22:28:21 2011] Mean chipx,y = (382.93, 127.26)
[Sat Oct 15 22:28:21 2011] Mean tdetx,y = (4299.93, 1829.26)
[Sat Oct 15 22:28:21 2011] chipx,y range = (363.00-403.00, 108.00-147.00)
[Sat Oct 15 22:28:21 2011] Size of ../../acisf11575/products/events/fullrun_ccd7_acisf11575_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 52 counts
[Sat Oct 15 22:28:21 2011] ../../acisf11575/products/images/fullrun_ccd7_acisf11575_pi14-548_pass1_cl_src1_src.img and ../../acisf11575/products/images/fullrun_ccd7_acisf11575_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Oct 15 22:28:21 2011] rmf not found, will run specextract
[Sat Oct 15 22:28:21 2011] arf not found, will run specextract
[Sat Oct 15 22:28:28 2011] ../../acisf11575/products/spectra/fullrun_ccd7_acisf11575_pi14-548_pass1_cl_src1.warf not found
[Sat Oct 15 22:28:28 2011] ../../acisf11575/products/spectra/fullrun_ccd7_acisf11575_pi14-548_pass1_cl_src1.wrmf not found
[Sat Oct 15 22:28:28 2011] Removal of ../../acisf11575/products/spectra/fullrun_ccd7_acisf11575_pi14-548_pass1_cl_src1.soff failed
[Sat Oct 15 22:28:34 2011] ../../acisf11575/products/lightcurves/fullrun_ccd7_acisf11575_pi14-548_pass1_cl_src1_src.lc and ../../acisf11575/products/lightcurves/fullrun_ccd7_acisf11575_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Oct 15 22:36:30 2011] Keeping rmf generated by specextract
[Sat Oct 15 22:36:30 2011] 222.93
[Sat Oct 15 22:36:33 2011] Updating aperture counts using extracted products
[Sat Oct 15 22:36:33 2011] Error reading totcts from fullrun_ccd7_acisf11575_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Oct 15 22:36:34 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 22:36:34 2011] Using photon index=1.80, rate=0.0182, arf fullrun_ccd7_acisf11575_pi14-548_pass1_cl_src1.arf
[Sat Oct 15 22:36:34 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 22:36:34 2011] Updating source flux to 1.5e-13
[Sat Oct 15 22:36:56 2011] Reading fit data from acisf11575/analysis//spectral/fullrun_ccd7_acisf11575_pi14-548_pass1_cl_src1_pl.csv
[Sat Oct 15 22:36:56 2011] Spectral fit parameter nH value = 1.42144e+21
[Sat Oct 15 22:36:56 2011] Spectral fit parameter PhoIndex value = 1.69236
[Sat Oct 15 22:36:56 2011] Failed to get F(0.3-8.0) from acisf11575/analysis//spectral/fullrun_ccd7_acisf11575_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Oct 15 22:36:56 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 22:36:56 2011] Using Nh = 1.4e+21, photon index=1.69, rate=0.0182, arf fullrun_ccd7_acisf11575_pi14-548_pass1_cl_src1.arf
[Sat Oct 15 22:36:56 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 22:36:57 2011] Updating source flux to 1.6e-13