[Fri Sep 30 14:07:47 2011] Detection parameters:
  Position = (593.5, 467.3) = 16 26 33.64 45 22 48.2
  Extent = 0.6" x 0.5", rotation angle = 115 degrees
  Source counts = 135.3 +/- 11.7
  Background counts = 2.7
  Rate = 0.004 +/- 0.0003

[Fri Sep 30 14:07:48 2011] Off-axis axis estimate = 3.04'
[Fri Sep 30 14:08:37 2011] Using EEF radius (= 0.59 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 14:08:37 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 14:08:37 2011] Initial guess for spatial extent in simple fitting = 0.59"
[Fri Sep 30 14:08:37 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.783
[Fri Sep 30 14:08:37 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.59"
[Fri Sep 30 14:08:40 2011] fullrun_ccd7_acisf11570_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 30 14:08:40 2011] fullrun_ccd7_acisf11570_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 30 14:08:40 2011] Fit fullrun_ccd7_acisf11570_pi14-548_cl_pass0_src1 appears to have run properly
[Fri Sep 30 14:08:40 2011] fullrun_ccd7_acisf11570_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 30 14:08:40 2011] fullrun_ccd7_acisf11570_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 30 14:08:40 2011] Fit fullrun_ccd7_acisf11570_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 30 14:08:49 2011] Spatial fit model total counts = 137.049000, observed total counts = 143.000000
[Fri Sep 30 14:08:49 2011] Offset between fit and detection position for source 2 = 0.780717 pixels
[Fri Sep 30 14:08:49 2011] 138.698140 total counts/ 5.956140 bgd. counts: snr = 54.390858
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.780717 pixels
  Position = (594.0, 467.9) = 16 26 33.64 45 22 48.3
  Extent = 0.6 (0.6-0.6)", rotation angle = 0
  Source counts = 132.7 +/- 11.8
  Background counts = 6.0
  Rate = 0.004 +/- 0.0003
[Fri Sep 30 14:08:49 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 14:08:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 14:08:49 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 14:08:49 2011] Source does appear to be extended
[Fri Sep 30 14:08:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 14:09:06 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 14:09:06 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 14:09:06 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Fri Sep 30 14:09:06 2011] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.441
[Fri Sep 30 14:09:06 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.57"
[Fri Sep 30 14:09:06 2011] fullrun_ccd7_acisf11570_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 30 14:09:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11570_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 14:09:06 2011] fullrun_ccd7_acisf11570_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 30 14:09:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11570_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 14:09:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11570_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11570_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 14:09:07 2011] fullrun_ccd7_acisf11570_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 30 14:09:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11570_pi14-548_cl_pass1_tfrozen_src1.csv
[Fri Sep 30 14:09:07 2011] fullrun_ccd7_acisf11570_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 30 14:09:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11570_pi14-548_cl_pass1_tfrozen_src1.csv
[Fri Sep 30 14:09:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11570_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11570_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 14:09:15 2011] Spatial fit model total counts = 124.742000, observed total counts = 145.000000
[Fri Sep 30 14:09:15 2011] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Sep 30 14:09:15 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 14:09:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 14:09:15 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 14:09:15 2011] Source does appear to be extended
[Fri Sep 30 14:09:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 14:10:26 2011] Not overwriting source region fullrun_ccd7_acisf11570_pi14-548_pass1_cl_src2_src.reg
[Fri Sep 30 14:10:26 2011] Extracting stamp from image fullrun_ccd7_acisf11570_pi14-548_cl_sm2.00.img.gz, (568, 442) - (620, 494)
[Fri Sep 30 14:10:26 2011] Writing fullrun_ccd7_acisf11570_pi14-548_pass1_cl_src2.gif
[Fri Sep 30 14:10:29 2011] ../../acisf11570/products/events/fullrun_ccd7_acisf11570_pi14-548_pass1_cl_src2_src.evt and ../../acisf11570/products/events/fullrun_ccd7_acisf11570_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Sep 30 14:10:29 2011] Size of ../../acisf11570/products/events/fullrun_ccd7_acisf11570_pi14-548_pass1_cl_src2_src.evt.gz[events] = 137 counts
[Fri Sep 30 14:10:29 2011] Mean chipx,y = (554.01, 602.73)
[Fri Sep 30 14:10:29 2011] Mean tdetx,y = (4471.01, 2304.73)
[Fri Sep 30 14:10:29 2011] chipx,y range = (533.00-569.00, 585.00-623.00)
[Fri Sep 30 14:10:29 2011] Size of ../../acisf11570/products/events/fullrun_ccd7_acisf11570_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 17 counts
[Fri Sep 30 14:10:29 2011] ../../acisf11570/products/images/fullrun_ccd7_acisf11570_pi14-548_pass1_cl_src2_src.img and ../../acisf11570/products/images/fullrun_ccd7_acisf11570_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Sep 30 14:10:29 2011] ../../acisf11570/products/spectra/fullrun_ccd7_acisf11570_pi14-548_pass1_cl_src2_src.pi and ../../acisf11570/products/spectra/fullrun_ccd7_acisf11570_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri Sep 30 14:10:32 2011] ../../acisf11570/products/lightcurves/fullrun_ccd7_acisf11570_pi14-548_pass1_cl_src2_src.lc and ../../acisf11570/products/lightcurves/fullrun_ccd7_acisf11570_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Sep 30 14:12:09 2011] Keeping rmf generated by specextract
[Fri Sep 30 14:12:09 2011] 226.741
[Fri Sep 30 14:12:12 2011] Updating aperture counts using extracted products
[Fri Sep 30 14:12:12 2011] Error reading totcts from fullrun_ccd7_acisf11570_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Sep 30 14:12:12 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 14:12:12 2011] Using photon index=1.80, rate=0.00361, arf fullrun_ccd7_acisf11570_pi14-548_pass1_cl_src2.arf
[Fri Sep 30 14:12:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 14:12:12 2011] Updating source flux to 2.7e-14
[Fri Sep 30 14:12:31 2011] Flag p found in src. 2 procflags, skipping spectral fitting
[Fri Sep 30 14:12:34 2011] Reading fit data from acisf11570/analysis//spectral/fullrun_ccd7_acisf11570_pi14-548_pass1_cl_src2_pl.csv
[Fri Sep 30 14:12:34 2011] Spectral fit parameter nH value = 1.73579e+13
[Fri Sep 30 14:12:34 2011] Spectral fit parameter PhoIndex value = 2.05502
[Fri Sep 30 14:12:34 2011] Failed to get F(0.3-8.0) from acisf11570/analysis//spectral/fullrun_ccd7_acisf11570_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Sep 30 14:12:34 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 14:12:34 2011] Using Nh = 1.7e+13, photon index=2.06, rate=0.00361, arf fullrun_ccd7_acisf11570_pi14-548_pass1_cl_src2.arf
[Fri Sep 30 14:12:34 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 14:12:34 2011] Updating source flux to 2.5e-14