[Fri Sep 30 14:07:46 2011] Detection parameters:
  Position = (116.2, 581.4) = 16 27 44.33 45 24 28.0
  Extent = 1.8" x 1.5", rotation angle = 40 degrees
  Source counts = 420.9 +/- 22.6
  Background counts = 89.1
  Rate = 0.01 +/- 0.0006

[Fri Sep 30 14:07:46 2011] Off-axis axis estimate = 9.59'
[Fri Sep 30 14:08:36 2011] Using EEF radius (= 4.07 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 14:08:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 14:08:36 2011] Initial guess for spatial extent in simple fitting = 4.07"
[Fri Sep 30 14:08:36 2011] source mask rpix=8.3, npix_max = 307, mask sum = 282, frac = 0.918
[Fri Sep 30 14:08:36 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 4.07"
[Fri Sep 30 14:08:36 2011] fullrun_ccd6_acisf11570_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 30 14:08:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11570_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 14:08:37 2011] fullrun_ccd6_acisf11570_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 30 14:08:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11570_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 14:08:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11570_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11570_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 14:08:37 2011] fullrun_ccd6_acisf11570_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 30 14:08:37 2011] fullrun_ccd6_acisf11570_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 30 14:08:37 2011] Fit fullrun_ccd6_acisf11570_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 30 14:08:47 2011] Spatial fit model total counts = 703.360000, observed total counts = 699.000000
[Fri Sep 30 14:08:47 2011] Offset between fit and detection position for source 2 = 1.249459 pixels
[Fri Sep 30 14:08:47 2011] 704.306900 total counts/ 65.250900 bgd. counts: snr = 79.112601
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.249459 pixels
  Position = (115.0, 581.1) = 16 27 44.41 45 24 27.6
  Extent = 5.1 (4.8-5.4)", rotation angle = 0
  Source counts = 639.1 +/- 26.5
  Background counts = 65.3
  Rate = 0.02 +/- 0.0007
[Fri Sep 30 14:08:47 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 14:08:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 14:08:47 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 14:08:47 2011] Source does appear to be extended
[Fri Sep 30 14:08:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 14:09:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 14:09:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 14:09:05 2011] Initial guess for spatial extent in simple fitting = 5.12"
[Fri Sep 30 14:09:05 2011] source mask rpix=10.4, npix_max = 475, mask sum = 418, frac = 0.878
[Fri Sep 30 14:09:05 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.12"
[Fri Sep 30 14:09:05 2011] fullrun_ccd6_acisf11570_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 30 14:09:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11570_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 14:09:05 2011] fullrun_ccd6_acisf11570_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 30 14:09:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11570_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 14:09:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11570_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11570_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 14:09:05 2011] fullrun_ccd6_acisf11570_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 30 14:09:05 2011] fullrun_ccd6_acisf11570_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 30 14:09:05 2011] Fit fullrun_ccd6_acisf11570_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 30 14:09:13 2011] Spatial fit model total counts = 737.494000, observed total counts = 731.000000
[Fri Sep 30 14:09:13 2011] Offset between fit and detection position for source 2 = 0.352683 pixels
[Fri Sep 30 14:09:13 2011] 738.008500 total counts/ 94.518500 bgd. counts: snr = 66.188630
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.352683 pixels
  Position = (115.3, 581.2) = 16 27 44.39 45 24 27.6
  Extent = 5.1 (4.8-5.4)", rotation angle = 0
  Source counts = 643.5 +/- 27.2
  Background counts = 94.5
  Rate = 0.02 +/- 0.0007
[Fri Sep 30 14:09:13 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 14:09:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 14:09:13 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 14:09:13 2011] Source does appear to be extended
[Fri Sep 30 14:09:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 14:09:48 2011] Not overwriting source region fullrun_ccd6_acisf11570_pi14-548_pass1_cl_src2_src.reg
[Fri Sep 30 14:09:48 2011] Extracting stamp from image fullrun_ccd6_acisf11570_pi14-548_cl_sm2.00.img.gz, (0, 348) - (348, 814)
[Fri Sep 30 14:09:48 2011] Writing fullrun_ccd6_acisf11570_pi14-548_pass1_cl_src2.gif
[Fri Sep 30 14:09:50 2011] ../../acisf11570/products/events/fullrun_ccd6_acisf11570_pi14-548_pass1_cl_src2_src.evt and ../../acisf11570/products/events/fullrun_ccd6_acisf11570_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Sep 30 14:09:50 2011] Size of ../../acisf11570/products/events/fullrun_ccd6_acisf11570_pi14-548_pass1_cl_src2_src.evt.gz[events] = 710 counts
[Fri Sep 30 14:09:50 2011] Mean chipx,y = (68.62, 521.11)
[Fri Sep 30 14:09:50 2011] Mean tdetx,y = (2943.62, 2223.11)
[Fri Sep 30 14:09:50 2011] chipx,y range = (19.00-117.00, 475.00-565.00)
[Fri Sep 30 14:09:50 2011] Size of ../../acisf11570/products/events/fullrun_ccd6_acisf11570_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 402 counts
[Fri Sep 30 14:09:50 2011] ../../acisf11570/products/images/fullrun_ccd6_acisf11570_pi14-548_pass1_cl_src2_src.img and ../../acisf11570/products/images/fullrun_ccd6_acisf11570_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Sep 30 14:09:50 2011] ../../acisf11570/products/spectra/fullrun_ccd6_acisf11570_pi14-548_pass1_cl_src2_src.pi and ../../acisf11570/products/spectra/fullrun_ccd6_acisf11570_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri Sep 30 14:09:53 2011] ../../acisf11570/products/lightcurves/fullrun_ccd6_acisf11570_pi14-548_pass1_cl_src2_src.lc and ../../acisf11570/products/lightcurves/fullrun_ccd6_acisf11570_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Sep 30 14:10:26 2011] Keeping rmf generated by specextract
[Fri Sep 30 14:10:26 2011] 145.391
[Fri Sep 30 14:12:12 2011] Updating aperture counts using extracted products
[Fri Sep 30 14:12:12 2011] Error reading totcts from fullrun_ccd6_acisf11570_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Sep 30 14:12:12 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 14:12:12 2011] Using photon index=1.80, rate=0.0175, arf fullrun_ccd6_acisf11570_pi14-548_pass1_cl_src2.arf
[Fri Sep 30 14:12:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 14:12:12 2011] Updating source flux to 2.6e-13
[Fri Sep 30 14:12:31 2011] Reading fit data from acisf11570/analysis//spectral/fullrun_ccd6_acisf11570_pi14-548_pass1_cl_src2_pl.csv
[Fri Sep 30 14:12:31 2011] Spectral fit parameter nH value = 6.72425e+12
[Fri Sep 30 14:12:31 2011] Spectral fit parameter PhoIndex value = 1.82908
[Fri Sep 30 14:12:31 2011] Failed to get F(0.3-8.0) from acisf11570/analysis//spectral/fullrun_ccd6_acisf11570_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Sep 30 14:12:31 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 14:12:31 2011] Using Nh = 6.7e+12, photon index=1.83, rate=0.0175, arf fullrun_ccd6_acisf11570_pi14-548_pass1_cl_src2.arf
[Fri Sep 30 14:12:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 14:12:31 2011] Updating source flux to 2.6e-13