[Tue Oct 25 14:00:35 2011] Detection parameters:
  Position = (1012.5, 379.8) = 12 55 53.25 35 53 19.8
  Extent = 0.7" x 0.5", rotation angle = 23 degrees
  Source counts = 29.5 +/- 5.7
  Background counts = 2.5
  Rate = 0.0007 +/- 0.0001

[Tue Oct 25 14:00:37 2011] Off-axis axis estimate = 3.22'
[Tue Oct 25 14:01:33 2011] Using EEF radius (= 0.63 ")to estimate initial spatial extent for simple fitting
[Tue Oct 25 14:01:33 2011] Initial guess for spatial extent in simple fitting = 0.63"
[Tue Oct 25 14:01:33 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.952
[Tue Oct 25 14:01:33 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 0.63"
[Tue Oct 25 14:01:34 2011] fullrun_ccd7_acisf11569_pi14-548_cl_pass0_src13.ximg exists
[Tue Oct 25 14:01:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11569_pi14-548_cl_pass0_src13.csv
[Tue Oct 25 14:01:34 2011] fullrun_ccd7_acisf11569_pi14-548_cl_pass0_src13_1.ximg exists
[Tue Oct 25 14:01:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11569_pi14-548_cl_pass0_src13.csv
[Tue Oct 25 14:01:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11569_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11569_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 25 14:01:35 2011] fullrun_ccd7_acisf11569_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Tue Oct 25 14:01:35 2011] fullrun_ccd7_acisf11569_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Tue Oct 25 14:01:35 2011] Fit fullrun_ccd7_acisf11569_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Tue Oct 25 14:01:48 2011] Spatial fit model total counts = 32.602700, observed total counts = 32.000000
[Tue Oct 25 14:01:48 2011] Offset between fit and detection position for source 3 = 0.715543 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.715543 pixels
  Position = (1013.0, 380.3) = 12 55 53.25 35 53 19.8
  Extent = 0.9 (0.8-1.0)", rotation angle = 0
  Source counts = 32.6 +/- 5.7
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0001
[Tue Oct 25 14:01:48 2011] Vigneting correction estimate = 1.000000
[Tue Oct 25 14:01:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 25 14:01:48 2011] Assessing source extent using major axis lower bound
[Tue Oct 25 14:01:48 2011] Source does appear to be extended
[Tue Oct 25 14:01:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 25 14:02:06 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 25 14:02:06 2011] Initial guess for spatial extent in simple fitting = 0.89"
[Tue Oct 25 14:02:06 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.945
[Tue Oct 25 14:02:06 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.89"
[Tue Oct 25 14:02:07 2011] fullrun_ccd7_acisf11569_pi14-548_cl_pass1_src13.ximg exists
[Tue Oct 25 14:02:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11569_pi14-548_cl_pass1_src13.csv
[Tue Oct 25 14:02:07 2011] fullrun_ccd7_acisf11569_pi14-548_cl_pass1_src13_1.ximg exists
[Tue Oct 25 14:02:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11569_pi14-548_cl_pass1_src13.csv
[Tue Oct 25 14:02:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11569_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11569_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 25 14:02:07 2011] fullrun_ccd7_acisf11569_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Tue Oct 25 14:02:07 2011] fullrun_ccd7_acisf11569_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Oct 25 14:02:07 2011] Fit fullrun_ccd7_acisf11569_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Tue Oct 25 14:02:17 2011] Spatial fit model total counts = 30.442500, observed total counts = 32.000000
[Tue Oct 25 14:02:17 2011] Offset between fit and detection position for source 3 = 0.024442 pixels
[Tue Oct 25 14:02:17 2011] 30.439400 total counts/ 0.000000 bgd. counts: snr = 364225453.094137
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.024442 pixels
  Position = (1013.0, 380.3) = 12 55 53.25 35 53 19.8
  Extent = 0.9 (0.8-1.0)", rotation angle = 0
  Source counts = 30.4 +/- 5.5
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0001
[Tue Oct 25 14:02:17 2011] Vigneting correction estimate = 1.000000
[Tue Oct 25 14:02:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 25 14:02:17 2011] Assessing source extent using major axis lower bound
[Tue Oct 25 14:02:17 2011] Source does appear to be extended
[Tue Oct 25 14:02:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 25 14:15:33 2011] Not overwriting source region fullrun_ccd7_acisf11569_pi14-548_pass1_cl_src3_src.reg
[Tue Oct 25 14:15:33 2011] Extracting stamp from image fullrun_ccd7_acisf11569_pi14-548_cl_sm2.00.img.gz, (972, 339) - (1054, 422)
[Tue Oct 25 14:15:33 2011] Writing fullrun_ccd7_acisf11569_pi14-548_pass1_cl_src3.gif
[Tue Oct 25 14:18:10 2011] ../../acisf11569/products/events/fullrun_ccd7_acisf11569_pi14-548_pass1_cl_src3_src.evt and ../../acisf11569/products/events/fullrun_ccd7_acisf11569_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Tue Oct 25 14:18:10 2011] Size of ../../acisf11569/products/events/fullrun_ccd7_acisf11569_pi14-548_pass1_cl_src3_src.evt.gz[events] = 32 counts
[Tue Oct 25 14:18:10 2011] Mean chipx,y = (298.91, 123.00)
[Tue Oct 25 14:18:10 2011] Mean tdetx,y = (4215.91, 1825.00)
[Tue Oct 25 14:18:10 2011] chipx,y range = (280.00-317.00, 106.00-140.00)
[Tue Oct 25 14:18:10 2011] Size of ../../acisf11569/products/events/fullrun_ccd7_acisf11569_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 38 counts
[Tue Oct 25 14:18:10 2011] ../../acisf11569/products/images/fullrun_ccd7_acisf11569_pi14-548_pass1_cl_src3_src.img and ../../acisf11569/products/images/fullrun_ccd7_acisf11569_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Tue Oct 25 14:18:10 2011] Not generating rmf since there are only 30 counts
[Tue Oct 25 14:18:10 2011] arf not found, will run specextract
[Tue Oct 25 14:18:18 2011] ../../acisf11569/products/spectra/fullrun_ccd7_acisf11569_pi14-548_pass1_cl_src3.warf not found
[Tue Oct 25 14:18:18 2011] ../../acisf11569/products/spectra/fullrun_ccd7_acisf11569_pi14-548_pass1_cl_src3.wrmf not found
[Tue Oct 25 14:18:18 2011] Removal of ../../acisf11569/products/spectra/fullrun_ccd7_acisf11569_pi14-548_pass1_cl_src3.soff failed
[Tue Oct 25 14:18:23 2011] ../../acisf11569/products/lightcurves/fullrun_ccd7_acisf11569_pi14-548_pass1_cl_src3_src.lc and ../../acisf11569/products/lightcurves/fullrun_ccd7_acisf11569_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Tue Oct 25 14:23:04 2011] Spectrum 3 has only 30 counts, deleting rmf
[Tue Oct 25 14:23:04 2011] 223.439
[Tue Oct 25 14:23:07 2011] Updating aperture counts using extracted products
[Tue Oct 25 14:23:07 2011] Error reading totcts from fullrun_ccd7_acisf11569_pi14-548_pass1_cl_src3_src.pi.gz
[Tue Oct 25 14:23:07 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 25 14:23:07 2011] Using photon index=1.80, rate=0.000771, arf fullrun_ccd7_acisf11569_pi14-548_pass1_cl_src3.arf
[Tue Oct 25 14:23:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 25 14:23:07 2011] Updating source flux to 6.4e-15
[Tue Oct 25 14:23:16 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting