[Tue Oct 25 14:00:36 2011] Detection parameters:
  Position = (669.5, 946.6) = 12 56 7.15 35 57 58.6
  Extent = 0.5" x 0.5", rotation angle = 116 degrees
  Source counts = 39.4 +/- 6.4
  Background counts = 1.6
  Rate = 0.001 +/- 0.0002

[Tue Oct 25 14:00:37 2011] Off-axis axis estimate = 2.96'
[Tue Oct 25 14:01:33 2011] Using EEF radius (= 0.57 ")to estimate initial spatial extent for simple fitting
[Tue Oct 25 14:01:33 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Tue Oct 25 14:01:33 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.815
[Tue Oct 25 14:01:33 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.57"
[Tue Oct 25 14:01:34 2011] fullrun_ccd7_acisf11569_pi14-548_cl_pass0_src11.ximg exists
[Tue Oct 25 14:01:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11569_pi14-548_cl_pass0_src11.csv
[Tue Oct 25 14:01:34 2011] fullrun_ccd7_acisf11569_pi14-548_cl_pass0_src11_1.ximg exists
[Tue Oct 25 14:01:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11569_pi14-548_cl_pass0_src11.csv
[Tue Oct 25 14:01:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11569_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11569_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 25 14:01:35 2011] fullrun_ccd7_acisf11569_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Tue Oct 25 14:01:35 2011] fullrun_ccd7_acisf11569_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Oct 25 14:01:35 2011] Fit fullrun_ccd7_acisf11569_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Tue Oct 25 14:01:48 2011] Spatial fit model total counts = 44.819100, observed total counts = 45.000000
[Tue Oct 25 14:01:48 2011] Offset between fit and detection position for source 19 = 0.644545 pixels
[Tue Oct 25 14:01:48 2011] 44.954810 total counts/ 5.870110 bgd. counts: snr = 16.131831
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.644545 pixels
  Position = (670.0, 947.0) = 12 56 7.15 35 57 58.6
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 39.1 +/- 6.7
  Background counts = 5.9
  Rate = 0.001 +/- 0.0002
[Tue Oct 25 14:01:48 2011] Vigneting correction estimate = 1.000000
[Tue Oct 25 14:01:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 25 14:01:48 2011] Assessing source extent using major axis lower bound
[Tue Oct 25 14:01:48 2011] Source does appear to be extended
[Tue Oct 25 14:01:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 25 14:02:06 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 25 14:02:06 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Tue Oct 25 14:02:06 2011] source mask rpix=1.1, npix_max = 10, mask sum = 16, frac = 1.595
[Tue Oct 25 14:02:06 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.53"
[Tue Oct 25 14:02:07 2011] fullrun_ccd7_acisf11569_pi14-548_cl_pass1_src11.ximg exists
[Tue Oct 25 14:02:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11569_pi14-548_cl_pass1_src11.csv
[Tue Oct 25 14:02:07 2011] fullrun_ccd7_acisf11569_pi14-548_cl_pass1_src11_1.ximg exists
[Tue Oct 25 14:02:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11569_pi14-548_cl_pass1_src11.csv
[Tue Oct 25 14:02:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11569_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11569_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 25 14:02:07 2011] fullrun_ccd7_acisf11569_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Tue Oct 25 14:02:07 2011] fullrun_ccd7_acisf11569_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Oct 25 14:02:07 2011] Fit fullrun_ccd7_acisf11569_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Tue Oct 25 14:02:17 2011] Spatial fit model total counts = 42.328800, observed total counts = 45.000000
[Tue Oct 25 14:02:17 2011] Offset between fit and detection position for source 19 = 0.050925 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.050925 pixels
  Position = (670.0, 947.1) = 12 56 7.15 35 57 58.6
  Extent = 0.6 (0.5-0.6)", rotation angle = 0
  Source counts = 44.7 +/- 6.7
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Tue Oct 25 14:02:17 2011] Vigneting correction estimate = 1.000000
[Tue Oct 25 14:02:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 25 14:02:17 2011] Assessing source extent using major axis lower bound
[Tue Oct 25 14:02:17 2011] Source does appear to be extended
[Tue Oct 25 14:02:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 25 14:15:32 2011] Not overwriting source region fullrun_ccd7_acisf11569_pi14-548_pass1_cl_src19_src.reg
[Tue Oct 25 14:15:32 2011] Extracting stamp from image fullrun_ccd7_acisf11569_pi14-548_cl_sm2.00.img.gz, (643, 920) - (697, 974)
[Tue Oct 25 14:15:32 2011] Writing fullrun_ccd7_acisf11569_pi14-548_pass1_cl_src19.gif
[Tue Oct 25 14:17:44 2011] ../../acisf11569/products/events/fullrun_ccd7_acisf11569_pi14-548_pass1_cl_src19_src.evt and ../../acisf11569/products/events/fullrun_ccd7_acisf11569_pi14-548_pass1_cl_src19_bgd.evt exist, delete to re-create
[Tue Oct 25 14:17:44 2011] Size of ../../acisf11569/products/events/fullrun_ccd7_acisf11569_pi14-548_pass1_cl_src19_src.evt.gz[events] = 41 counts
[Tue Oct 25 14:17:44 2011] Mean chipx,y = (416.34, 772.90)
[Tue Oct 25 14:17:44 2011] Mean tdetx,y = (4333.34, 2474.90)
[Tue Oct 25 14:17:44 2011] chipx,y range = (400.00-434.00, 757.00-793.00)
[Tue Oct 25 14:17:44 2011] Size of ../../acisf11569/products/events/fullrun_ccd7_acisf11569_pi14-548_pass1_cl_src19_bgd.evt.gz[events] = 24 counts
[Tue Oct 25 14:17:44 2011] ../../acisf11569/products/images/fullrun_ccd7_acisf11569_pi14-548_pass1_cl_src19_src.img and ../../acisf11569/products/images/fullrun_ccd7_acisf11569_pi14-548_pass1_cl_src19_bgd.img exist, delete to re-create
[Tue Oct 25 14:17:44 2011] Not generating rmf since there are only 44 counts
[Tue Oct 25 14:17:44 2011] arf not found, will run specextract
[Tue Oct 25 14:17:52 2011] ../../acisf11569/products/spectra/fullrun_ccd7_acisf11569_pi14-548_pass1_cl_src19.warf not found
[Tue Oct 25 14:17:52 2011] ../../acisf11569/products/spectra/fullrun_ccd7_acisf11569_pi14-548_pass1_cl_src19.wrmf not found
[Tue Oct 25 14:17:52 2011] Removal of ../../acisf11569/products/spectra/fullrun_ccd7_acisf11569_pi14-548_pass1_cl_src19.soff failed
[Tue Oct 25 14:17:57 2011] ../../acisf11569/products/lightcurves/fullrun_ccd7_acisf11569_pi14-548_pass1_cl_src19_src.lc and ../../acisf11569/products/lightcurves/fullrun_ccd7_acisf11569_pi14-548_pass1_cl_src19_bgd.lc exist, delete to re-create
[Tue Oct 25 14:23:04 2011] Spectrum 19 has only 45 counts, deleting rmf
[Tue Oct 25 14:23:04 2011] 229.376
[Tue Oct 25 14:23:07 2011] Updating aperture counts using extracted products
[Tue Oct 25 14:23:07 2011] Error reading totcts from fullrun_ccd7_acisf11569_pi14-548_pass1_cl_src19_src.pi.gz
[Tue Oct 25 14:23:07 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 25 14:23:07 2011] Using photon index=1.80, rate=0.00113, arf fullrun_ccd7_acisf11569_pi14-548_pass1_cl_src19.arf
[Tue Oct 25 14:23:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 25 14:23:07 2011] Updating source flux to 8.6e-15
[Tue Oct 25 14:23:16 2011] Source 19 has fewer than 100.000000 counts, skipping spectral fitting