[Thu Oct 20 02:06:38 2011] Detection parameters:
  Position = (326.5, 288.3) = 9 24 58.46 2 11 17.7
  Extent = 0.8" x 0.6", rotation angle = 103 degrees
  Source counts = 209.4 +/- 15.2
  Background counts = 20.6
  Rate = 0.01 +/- 0.0007

[Thu Oct 20 02:06:38 2011] Off-axis axis estimate = 7.91'
[Thu Oct 20 02:07:05 2011] Using EEF radius (= 2.77 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 02:07:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 20 02:07:05 2011] Initial guess for spatial extent in simple fitting = 2.77"
[Thu Oct 20 02:07:05 2011] source mask rpix=5.6, npix_max = 149, mask sum = 156, frac = 1.041
[Thu Oct 20 02:07:05 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.77"
[Thu Oct 20 02:07:06 2011] fullrun_ccd6_acisf11563_pi14-548_cl_pass0_src1.ximg exists
[Thu Oct 20 02:07:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11563_pi14-548_cl_pass0_src1.csv
[Thu Oct 20 02:07:06 2011] fullrun_ccd6_acisf11563_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Oct 20 02:07:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11563_pi14-548_cl_pass0_src1.csv
[Thu Oct 20 02:07:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11563_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11563_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 02:07:06 2011] fullrun_ccd6_acisf11563_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct 20 02:07:06 2011] fullrun_ccd6_acisf11563_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct 20 02:07:06 2011] Fit fullrun_ccd6_acisf11563_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct 20 02:07:13 2011] Spatial fit model total counts = 389.157000, observed total counts = 387.000000
[Thu Oct 20 02:07:13 2011] Offset between fit and detection position for source 12 = 2.743312 pixels
[Thu Oct 20 02:07:13 2011] 388.874100 total counts/ 20.106100 bgd. counts: snr = 82.241175
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 2.743312 pixels
  Position = (328.1, 286.1) = 9 24 58.42 2 11 16.3
  Extent = 3.5 (3.3-3.9)", rotation angle = 0
  Source counts = 368.8 +/- 19.7
  Background counts = 20.1
  Rate = 0.02 +/- 0.0009
[Thu Oct 20 02:07:13 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 02:07:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 02:07:13 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 02:07:13 2011] Source does appear to be extended
[Thu Oct 20 02:07:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 02:07:13 2011] Source is confused with source 1
[Thu Oct 20 02:07:26 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 20 02:07:26 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 20 02:07:26 2011] Initial guess for spatial extent in simple fitting = 3.54"
[Thu Oct 20 02:07:26 2011] source mask rpix=7.2, npix_max = 237, mask sum = 226, frac = 0.952
[Thu Oct 20 02:07:26 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.54"
[Thu Oct 20 02:07:28 2011] fullrun_ccd6_acisf11563_pi14-548_cl_pass1_src1.ximg exists
[Thu Oct 20 02:07:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11563_pi14-548_cl_pass1_src1.csv
[Thu Oct 20 02:07:28 2011] fullrun_ccd6_acisf11563_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Oct 20 02:07:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11563_pi14-548_cl_pass1_src1.csv
[Thu Oct 20 02:07:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11563_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11563_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 02:07:29 2011] fullrun_ccd6_acisf11563_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct 20 02:07:29 2011] fullrun_ccd6_acisf11563_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct 20 02:07:29 2011] Fit fullrun_ccd6_acisf11563_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct 20 02:07:35 2011] Spatial fit model total counts = 396.783000, observed total counts = 396.000000
[Thu Oct 20 02:07:35 2011] Offset between fit and detection position for source 12 = 0.298144 pixels
[Thu Oct 20 02:07:35 2011] 396.831600 total counts/ 22.953600 bgd. counts: snr = 78.037708
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.298144 pixels
  Position = (328.4, 285.9) = 9 24 58.41 2 11 16.2
  Extent = 3.6 (3.4-3.8)", rotation angle = 0
  Source counts = 373.9 +/- 19.9
  Background counts = 23.0
  Rate = 0.02 +/- 0.0009
[Thu Oct 20 02:07:35 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 02:07:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 02:07:35 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 02:07:35 2011] Source does appear to be extended
[Thu Oct 20 02:07:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 02:11:36 2011] Not overwriting source region fullrun_ccd6_acisf11563_pi14-548_pass1_cl_src12_src.reg
[Thu Oct 20 02:11:36 2011] Extracting stamp from image fullrun_ccd6_acisf11563_pi14-548_cl_sm2.00.img.gz, (166, 123) - (491, 448)
[Thu Oct 20 02:11:36 2011] Writing fullrun_ccd6_acisf11563_pi14-548_pass1_cl_src12.gif
[Thu Oct 20 02:11:36 2011] ../../acisf11563/products/events/fullrun_ccd6_acisf11563_pi14-548_pass1_cl_src12_src.evt and ../../acisf11563/products/events/fullrun_ccd6_acisf11563_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Thu Oct 20 02:11:36 2011] Size of ../../acisf11563/products/events/fullrun_ccd6_acisf11563_pi14-548_pass1_cl_src12_src.evt.gz[events] = 389 counts
[Thu Oct 20 02:11:36 2011] Mean chipx,y = (264.62, 546.01)
[Thu Oct 20 02:11:36 2011] Mean tdetx,y = (3139.62, 2248.01)
[Thu Oct 20 02:11:36 2011] chipx,y range = (232.00-304.00, 509.00-578.00)
[Thu Oct 20 02:11:36 2011] Size of ../../acisf11563/products/events/fullrun_ccd6_acisf11563_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 213 counts
[Thu Oct 20 02:11:36 2011] ../../acisf11563/products/images/fullrun_ccd6_acisf11563_pi14-548_pass1_cl_src12_src.img and ../../acisf11563/products/images/fullrun_ccd6_acisf11563_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Thu Oct 20 02:11:36 2011] rmf not found, will run specextract
[Thu Oct 20 02:11:36 2011] arf not found, will run specextract
[Thu Oct 20 02:12:04 2011] ../../acisf11563/products/spectra/fullrun_ccd6_acisf11563_pi14-548_pass1_cl_src12.warf not found
[Thu Oct 20 02:12:04 2011] ../../acisf11563/products/spectra/fullrun_ccd6_acisf11563_pi14-548_pass1_cl_src12.wrmf not found
[Thu Oct 20 02:12:04 2011] Removal of ../../acisf11563/products/spectra/fullrun_ccd6_acisf11563_pi14-548_pass1_cl_src12.soff failed
[Thu Oct 20 02:12:09 2011] ../../acisf11563/products/lightcurves/fullrun_ccd6_acisf11563_pi14-548_pass1_cl_src12_src.lc and ../../acisf11563/products/lightcurves/fullrun_ccd6_acisf11563_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Thu Oct 20 02:16:06 2011] Keeping rmf generated by specextract
[Thu Oct 20 02:16:06 2011] 169.72
[Thu Oct 20 02:19:26 2011] Updating aperture counts using extracted products
[Thu Oct 20 02:19:26 2011] Error reading totcts from fullrun_ccd6_acisf11563_pi14-548_pass1_cl_src12_src.pi.gz
[Thu Oct 20 02:19:26 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 02:19:26 2011] Using photon index=1.80, rate=0.0176, arf fullrun_ccd6_acisf11563_pi14-548_pass1_cl_src12.arf
[Thu Oct 20 02:19:26 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 02:19:26 2011] Updating source flux to 2.2e-13
[Thu Oct 20 02:19:30 2011] Flag c found in src. 12 procflags, skipping spectral fitting
[Thu Oct 20 02:19:33 2011] Reading fit data from acisf11563/analysis//spectral/fullrun_ccd6_acisf11563_pi14-548_pass1_cl_src12_pl.csv
[Thu Oct 20 02:19:33 2011] Spectral fit parameter nH value = 9.21997e+20
[Thu Oct 20 02:19:33 2011] Spectral fit parameter PhoIndex value = 1.83733
[Thu Oct 20 02:19:33 2011] Failed to get F(0.3-8.0) from acisf11563/analysis//spectral/fullrun_ccd6_acisf11563_pi14-548_pass1_cl_src12_pl.csv, possibly due to different flux energy range selected
[Thu Oct 20 02:19:33 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 02:19:33 2011] Using Nh = 9.2e+20, photon index=1.84, rate=0.0176, arf fullrun_ccd6_acisf11563_pi14-548_pass1_cl_src12.arf
[Thu Oct 20 02:19:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 02:19:33 2011] Updating source flux to 2.1e-13