[Tue Oct 25 15:52:39 2011] Detection parameters:
  Position = (835.2, 314.4) = 9 25 0.48 2 22 22.0
  Extent = 0.7" x 0.5", rotation angle = 145 degrees
  Source counts = 213.3 +/- 14.7
  Background counts = 1.7
  Rate = 0.01 +/- 0.0007

[Tue Oct 25 15:52:39 2011] Off-axis axis estimate = 2.88'
[Tue Oct 25 15:53:07 2011] Using EEF radius (= 0.56 ")to estimate initial spatial extent for simple fitting
[Tue Oct 25 15:53:07 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct 25 15:53:07 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Tue Oct 25 15:53:07 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.844
[Tue Oct 25 15:53:07 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.56"
[Tue Oct 25 15:53:07 2011] fullrun_ccd6_acisf11562_pi14-548_cl_pass0_src1.ximg exists
[Tue Oct 25 15:53:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11562_pi14-548_cl_pass0_src1.csv
[Tue Oct 25 15:53:07 2011] fullrun_ccd6_acisf11562_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Oct 25 15:53:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11562_pi14-548_cl_pass0_src1.csv
[Tue Oct 25 15:53:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11562_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11562_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 25 15:53:07 2011] fullrun_ccd6_acisf11562_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Oct 25 15:53:07 2011] fullrun_ccd6_acisf11562_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Oct 25 15:53:07 2011] Fit fullrun_ccd6_acisf11562_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Oct 25 15:53:12 2011] Spatial fit model total counts = 216.879000, observed total counts = 215.000000
[Tue Oct 25 15:53:12 2011] Offset between fit and detection position for source 10 = 0.688788 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.688788 pixels
  Position = (835.7, 314.9) = 9 25 0.48 2 22 22.0
  Extent = 0.8 (0.7-0.8)", rotation angle = 0
  Source counts = 217.3 +/- 14.7
  Background counts = 0.0
  Rate = 0.01 +/- 0.0007
[Tue Oct 25 15:53:12 2011] Vigneting correction estimate = 1.000000
[Tue Oct 25 15:53:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 25 15:53:12 2011] Assessing source extent using major axis lower bound
[Tue Oct 25 15:53:12 2011] Source does appear to be extended
[Tue Oct 25 15:53:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 25 15:53:24 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 25 15:53:24 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct 25 15:53:24 2011] Initial guess for spatial extent in simple fitting = 0.78"
[Tue Oct 25 15:53:24 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.915
[Tue Oct 25 15:53:24 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.78"
[Tue Oct 25 15:53:24 2011] fullrun_ccd6_acisf11562_pi14-548_cl_pass1_src1.ximg exists
[Tue Oct 25 15:53:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11562_pi14-548_cl_pass1_src1.csv
[Tue Oct 25 15:53:24 2011] fullrun_ccd6_acisf11562_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Oct 25 15:53:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11562_pi14-548_cl_pass1_src1.csv
[Tue Oct 25 15:53:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11562_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11562_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 25 15:53:25 2011] fullrun_ccd6_acisf11562_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Oct 25 15:53:25 2011] fullrun_ccd6_acisf11562_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Oct 25 15:53:25 2011] Fit fullrun_ccd6_acisf11562_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Oct 25 15:53:30 2011] Spatial fit model total counts = 217.799000, observed total counts = 215.000000
[Tue Oct 25 15:53:30 2011] Offset between fit and detection position for source 10 = 0.011702 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.011702 pixels
  Position = (835.7, 314.9) = 9 25 0.48 2 22 22.0
  Extent = 0.8 (0.7-0.8)", rotation angle = 0
  Source counts = 217.9 +/- 14.8
  Background counts = 0.0
  Rate = 0.01 +/- 0.0007
[Tue Oct 25 15:53:30 2011] Vigneting correction estimate = 1.000000
[Tue Oct 25 15:53:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 25 15:53:30 2011] Assessing source extent using major axis lower bound
[Tue Oct 25 15:53:30 2011] Source does appear to be extended
[Tue Oct 25 15:53:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 25 15:56:07 2011] Not overwriting source region fullrun_ccd6_acisf11562_pi14-548_pass1_cl_src10_src.reg
[Tue Oct 25 15:56:07 2011] Extracting stamp from image fullrun_ccd6_acisf11562_pi14-548_cl_sm2.00.img.gz, (800, 279) - (872, 351)
[Tue Oct 25 15:56:07 2011] Writing fullrun_ccd6_acisf11562_pi14-548_pass1_cl_src10.gif
[Tue Oct 25 15:56:08 2011] ../../acisf11562/products/events/fullrun_ccd6_acisf11562_pi14-548_pass1_cl_src10_src.evt and ../../acisf11562/products/events/fullrun_ccd6_acisf11562_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Tue Oct 25 15:56:08 2011] Size of ../../acisf11562/products/events/fullrun_ccd6_acisf11562_pi14-548_pass1_cl_src10_src.evt.gz[events] = 214 counts
[Tue Oct 25 15:56:08 2011] Mean chipx,y = (895.70, 404.07)
[Tue Oct 25 15:56:08 2011] Mean tdetx,y = (3770.70, 2106.07)
[Tue Oct 25 15:56:08 2011] chipx,y range = (876.00-915.00, 387.00-423.00)
[Tue Oct 25 15:56:08 2011] Size of ../../acisf11562/products/events/fullrun_ccd6_acisf11562_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 9 counts
[Tue Oct 25 15:56:08 2011] ../../acisf11562/products/images/fullrun_ccd6_acisf11562_pi14-548_pass1_cl_src10_src.img and ../../acisf11562/products/images/fullrun_ccd6_acisf11562_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Tue Oct 25 15:56:08 2011] rmf not found, will run specextract
[Tue Oct 25 15:56:08 2011] arf not found, will run specextract
[Tue Oct 25 15:56:38 2011] ../../acisf11562/products/spectra/fullrun_ccd6_acisf11562_pi14-548_pass1_cl_src10.warf not found
[Tue Oct 25 15:56:38 2011] ../../acisf11562/products/spectra/fullrun_ccd6_acisf11562_pi14-548_pass1_cl_src10.wrmf not found
[Tue Oct 25 15:56:38 2011] Removal of ../../acisf11562/products/spectra/fullrun_ccd6_acisf11562_pi14-548_pass1_cl_src10.soff failed
[Tue Oct 25 15:56:44 2011] ../../acisf11562/products/lightcurves/fullrun_ccd6_acisf11562_pi14-548_pass1_cl_src10_src.lc and ../../acisf11562/products/lightcurves/fullrun_ccd6_acisf11562_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Tue Oct 25 16:02:02 2011] Keeping rmf generated by specextract
[Tue Oct 25 16:02:02 2011] 207.411
[Tue Oct 25 16:05:00 2011] Updating aperture counts using extracted products
[Tue Oct 25 16:05:00 2011] Error reading totcts from fullrun_ccd6_acisf11562_pi14-548_pass1_cl_src10_src.pi.gz
[Tue Oct 25 16:05:01 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 25 16:05:01 2011] Using photon index=1.80, rate=0.0101, arf fullrun_ccd6_acisf11562_pi14-548_pass1_cl_src10.arf
[Tue Oct 25 16:05:01 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 25 16:05:01 2011] Updating source flux to 1.1e-13
[Tue Oct 25 16:05:11 2011] Reading fit data from acisf11562/analysis//spectral/fullrun_ccd6_acisf11562_pi14-548_pass1_cl_src10_pl.csv
[Tue Oct 25 16:05:11 2011] Spectral fit parameter nH value = 1.08017e+22
[Tue Oct 25 16:05:11 2011] Spectral fit parameter PhoIndex value = 1.4351
[Tue Oct 25 16:05:11 2011] Failed to get F(0.3-8.0) from acisf11562/analysis//spectral/fullrun_ccd6_acisf11562_pi14-548_pass1_cl_src10_pl.csv, possibly due to different flux energy range selected
[Tue Oct 25 16:05:11 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 25 16:05:11 2011] Using Nh = 1.1e+22, photon index=1.44, rate=0.0101, arf fullrun_ccd6_acisf11562_pi14-548_pass1_cl_src10.arf
[Tue Oct 25 16:05:11 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 25 16:05:11 2011] Updating source flux to 1.7e-13