[Sat Oct 22 02:57:15 2011] Detection parameters: Position = (276.6, 538.6) = 1 58 41.38 -43 25 4.0 Extent = 0.6" x 0.5", rotation angle = 158 degrees Source counts = 196.3 +/- 14.0 Background counts = 0.7 Rate = 0.04 +/- 0.003 [Sat Oct 22 02:57:15 2011] Off-axis axis estimate = 0.29' [Sat Oct 22 02:59:27 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting [Sat Oct 22 02:59:27 2011] Initial guess for spatial extent in simple fitting = 0.41" [Sat Oct 22 02:59:27 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.284 [Sat Oct 22 02:59:27 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.41" [Sat Oct 22 03:02:18 2011] fullrun_ccd7_acisf11561_pi14-548_cl_pass0_src1.ximg exists [Sat Oct 22 03:02:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11561_pi14-548_cl_pass0_src1.csv [Sat Oct 22 03:02:18 2011] fullrun_ccd7_acisf11561_pi14-548_cl_pass0_src1_1.ximg exists [Sat Oct 22 03:02:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11561_pi14-548_cl_pass0_src1.csv [Sat Oct 22 03:02:18 2011] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf11561_pi14-548_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf11561_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Oct 22 03:02:18 2011] fullrun_ccd7_acisf11561_pi14-548_cl_pass0_tfrozen_src1.ximg exists [Sat Oct 22 03:02:18 2011] fullrun_ccd7_acisf11561_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists [Sat Oct 22 03:02:18 2011] Fit fullrun_ccd7_acisf11561_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly [Sat Oct 22 03:02:20 2011] Spatial fit model total counts = 200.975000, observed total counts = 199.000000 [Sat Oct 22 03:02:20 2011] Offset between fit and detection position for source 1 = 0.641263 pixels [Sat Oct 22 03:02:20 2011] 201.301200 total counts/ 10.187200 bgd. counts: snr = 59.877697 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.641263 pixels Position = (277.0, 539.1) = 1 58 41.38 -43 25 4.0 Extent = 0.6 (0.5-0.6)", rotation angle = 0 Source counts = 191.1 +/- 14.2 Background counts = 10.2 Rate = 0.04 +/- 0.003 [Sat Oct 22 03:02:20 2011] Vigneting correction estimate = 1.000000 [Sat Oct 22 03:02:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Oct 22 03:02:20 2011] Assessing source extent using major axis lower bound [Sat Oct 22 03:02:20 2011] Source does appear to be extended [Sat Oct 22 03:02:20 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Oct 22 03:04:04 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Oct 22 03:04:04 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Oct 22 03:04:04 2011] Initial guess for spatial extent in simple fitting = 0.56" [Sat Oct 22 03:04:04 2011] source mask rpix=1.1, npix_max = 10, mask sum = 16, frac = 1.493 [Sat Oct 22 03:04:04 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.56" [Sat Oct 22 03:07:38 2011] fullrun_ccd7_acisf11561_pi14-548_cl_pass1_src1.ximg exists [Sat Oct 22 03:07:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11561_pi14-548_cl_pass1_src1.csv [Sat Oct 22 03:07:38 2011] fullrun_ccd7_acisf11561_pi14-548_cl_pass1_src1_1.ximg exists [Sat Oct 22 03:07:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11561_pi14-548_cl_pass1_src1.csv [Sat Oct 22 03:07:38 2011] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf11561_pi14-548_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf11561_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Oct 22 03:07:38 2011] fullrun_ccd7_acisf11561_pi14-548_cl_pass1_tfrozen_src1.ximg exists [Sat Oct 22 03:07:38 2011] fullrun_ccd7_acisf11561_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists [Sat Oct 22 03:07:38 2011] Fit fullrun_ccd7_acisf11561_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly [Sat Oct 22 03:07:40 2011] Spatial fit model total counts = 199.622000, observed total counts = 200.000000 [Sat Oct 22 03:07:40 2011] Offset between fit and detection position for source 1 = 0.013771 pixels [Sat Oct 22 03:07:40 2011] 200.800000 total counts/ 11.162000 bgd. counts: snr = 56.761565 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.013771 pixels Position = (277.0, 539.0) = 1 58 41.38 -43 25 4.0 Extent = 0.6 (0.5-0.6)", rotation angle = 0 Source counts = 189.6 +/- 14.2 Background counts = 11.2 Rate = 0.04 +/- 0.003 [Sat Oct 22 03:07:40 2011] Vigneting correction estimate = 1.000000 [Sat Oct 22 03:07:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Oct 22 03:07:40 2011] Assessing source extent using major axis lower bound [Sat Oct 22 03:07:40 2011] Source does appear to be extended [Sat Oct 22 03:07:40 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Oct 22 03:12:00 2011] Writing source region out to fullrun_ccd7_acisf11561_pi14-548_pass1_cl_src1_src.reg [Sat Oct 22 03:12:00 2011] Extracting stamp from image fullrun_ccd7_acisf11561_pi14-548_cl_sm2.00.img.gz, (251, 513) - (303, 565) [Sat Oct 22 03:12:00 2011] Writing fullrun_ccd7_acisf11561_pi14-548_pass1_cl_src1.gif [Sat Oct 22 03:12:02 2011] Size of ../../acisf11561/products/events/fullrun_ccd7_acisf11561_pi14-548_pass1_cl_src1_src.evt.gz[events] = 192 counts [Sat Oct 22 03:12:02 2011] Mean chipx,y = (212.08, 519.07) [Sat Oct 22 03:12:02 2011] Mean tdetx,y = (4129.08, 2221.07) [Sat Oct 22 03:12:02 2011] chipx,y range = (195.00-232.00, 501.00-536.00) [Sat Oct 22 03:12:02 2011] Size of ../../acisf11561/products/events/fullrun_ccd7_acisf11561_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 7 counts [Sat Oct 22 03:12:03 2011] rmf not found, will run specextract [Sat Oct 22 03:12:03 2011] arf not found, will run specextract [Sat Oct 22 03:12:11 2011] ../../acisf11561/products/spectra/fullrun_ccd7_acisf11561_pi14-548_pass1_cl_src1.warf not found [Sat Oct 22 03:12:11 2011] ../../acisf11561/products/spectra/fullrun_ccd7_acisf11561_pi14-548_pass1_cl_src1.wrmf not found [Sat Oct 22 03:12:11 2011] Removal of ../../acisf11561/products/spectra/fullrun_ccd7_acisf11561_pi14-548_pass1_cl_src1.soff failed [Sat Oct 22 03:13:23 2011] Keeping rmf generated by specextract [Sat Oct 22 03:13:23 2011] 235.498 [Sat Oct 22 03:13:24 2011] Updating aperture counts using extracted products [Sat Oct 22 03:13:24 2011] Error reading totcts from fullrun_ccd7_acisf11561_pi14-548_pass1_cl_src1_src.pi.gz [Sat Oct 22 03:13:24 2011] Calculating source flux in energy range 0.30-8.00 [Sat Oct 22 03:13:24 2011] Using photon index=1.80, rate=0.0384, arf fullrun_ccd7_acisf11561_pi14-548_pass1_cl_src1.arf [Sat Oct 22 03:13:24 2011] Assuming count rate is from the 0.20-8.00 bandpass [Sat Oct 22 03:13:24 2011] Updating source flux to 2.9e-13 [Sat Oct 22 03:13:32 2011] Reading fit data from acisf11561/analysis//spectral/fullrun_ccd7_acisf11561_pi14-548_pass1_cl_src1_pl.csv [Sat Oct 22 03:13:32 2011] Spectral fit parameter nH value = 1.1245e+19 [Sat Oct 22 03:13:32 2011] Spectral fit parameter PhoIndex value = 1.95446 [Sat Oct 22 03:13:32 2011] Failed to get F(0.3-8.0) from acisf11561/analysis//spectral/fullrun_ccd7_acisf11561_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected [Sat Oct 22 03:13:32 2011] Calculating source flux in energy range 0.30-8.00 [Sat Oct 22 03:13:32 2011] Using Nh = 1.1e+19, photon index=1.95, rate=0.0384, arf fullrun_ccd7_acisf11561_pi14-548_pass1_cl_src1.arf [Sat Oct 22 03:13:32 2011] Assuming count rate is from the 0.20-8.00 bandpass [Sat Oct 22 03:13:32 2011] Updating source flux to 2.7e-13