[Wed May  1 20:10:12 2013] Detection parameters:
  Position = (660.6, 1154.8) = 10 4 46.42 41 14 47.7
  Extent = 0.6" x 0.5", rotation angle = 126 degrees
  Source counts = 11.7 +/- 3.5
  Background counts = 0.3
  Rate = 0.002 +/- 0.0006

[Wed May  1 20:10:13 2013] Off-axis axis estimate = 3.29'
[Wed May  1 20:12:36 2013] Using EEF radius (= 0.64 ")to estimate initial spatial extent for simple fitting
[Wed May  1 20:12:36 2013] Initial guess for spatial extent in simple fitting = 0.64"
[Wed May  1 20:12:36 2013] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.923
[Wed May  1 20:12:36 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 0.64"
[Wed May  1 20:25:47 2013] fullrun_ccd7_acisf11549_pi14-548_cl_pass0_src10.ximg exists
[Wed May  1 20:25:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11549_pi14-548_cl_pass0_src10.csv
[Wed May  1 20:25:47 2013] fullrun_ccd7_acisf11549_pi14-548_cl_pass0_src10_1.ximg exists
[Wed May  1 20:25:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11549_pi14-548_cl_pass0_src10.csv
[Wed May  1 20:25:47 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11549_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11549_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 20:25:48 2013] fullrun_ccd7_acisf11549_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Wed May  1 20:25:48 2013] fullrun_ccd7_acisf11549_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Wed May  1 20:25:48 2013] Fit fullrun_ccd7_acisf11549_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Wed May  1 20:25:51 2013] Spatial fit model total counts = 11.035800, observed total counts = 12.000000
[Wed May  1 20:25:51 2013] Offset between fit and detection position for source 13 = 0.815920 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.815920 pixels
  Position = (661.4, 1155.0) = 10 4 46.41 41 14 47.6
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 11.2 +/- 3.4
  Background counts = 0.0
  Rate = 0.002 +/- 0.0006
[Wed May  1 20:25:51 2013] Vigneting correction estimate = 1.000000
[Wed May  1 20:25:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 20:25:51 2013] Assessing source extent using major axis lower bound
[Wed May  1 20:25:51 2013] Source does appear to be extended
[Wed May  1 20:25:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 20:27:10 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  1 20:27:10 2013] Initial guess for spatial extent in simple fitting = 0.44"
[Wed May  1 20:27:10 2013] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.765
[Wed May  1 20:27:10 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 0.44"
[Wed May  1 20:40:21 2013] fullrun_ccd7_acisf11549_pi14-548_cl_pass1_src10.ximg exists
[Wed May  1 20:40:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11549_pi14-548_cl_pass1_src10.csv
[Wed May  1 20:40:21 2013] fullrun_ccd7_acisf11549_pi14-548_cl_pass1_src10_1.ximg exists
[Wed May  1 20:40:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11549_pi14-548_cl_pass1_src10.csv
[Wed May  1 20:40:21 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11549_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11549_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 20:40:21 2013] fullrun_ccd7_acisf11549_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Wed May  1 20:40:21 2013] fullrun_ccd7_acisf11549_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Wed May  1 20:40:21 2013] Fit fullrun_ccd7_acisf11549_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Wed May  1 20:40:24 2013] Spatial fit model total counts = 11.704300, observed total counts = 12.000000
[Wed May  1 20:40:24 2013] Offset between fit and detection position for source 13 = 0.057110 pixels
[Wed May  1 20:40:24 2013] 11.682843 total counts/ 0.215343 bgd. counts: snr = 24.711742
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.057110 pixels
  Position = (661.4, 1155.0) = 10 4 46.41 41 14 47.6
  Extent = 0.4 (0.4-0.7)", rotation angle = 0
  Source counts = 11.5 +/- 3.4
  Background counts = 0.2
  Rate = 0.002 +/- 0.0006
[Wed May  1 20:40:24 2013] Vigneting correction estimate = 1.000000
[Wed May  1 20:40:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 20:40:24 2013] Assessing source extent using major axis lower bound
[Wed May  1 20:40:24 2013] Source does appear to be extended
[Wed May  1 20:40:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 20:43:22 2013] Writing source region out to fullrun_ccd7_acisf11549_pi14-548_pass1_cl_src13_src.reg
[Wed May  1 20:43:22 2013] Extracting stamp from image fullrun_ccd7_acisf11549_pi14-548_cl_sm2.00.img.gz, (641, 1135) - (682, 1175)
[Wed May  1 20:43:22 2013] Writing fullrun_ccd7_acisf11549_pi14-548_pass1_cl_src13.gif
[Wed May  1 20:46:03 2013] Size of ../../acisf11549/products/events/fullrun_ccd7_acisf11549_pi14-548_pass1_cl_src13_src.evt.gz[events] = 11 counts
[Wed May  1 20:46:03 2013] Mean chipx,y = (261.45, 898.73)
[Wed May  1 20:46:03 2013] Mean tdetx,y = (4178.45, 2600.73)
[Wed May  1 20:46:03 2013] chipx,y range = (250.00-281.00, 878.00-910.00)
[Wed May  1 20:46:03 2013] Size of ../../acisf11549/products/events/fullrun_ccd7_acisf11549_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 2 counts
[Wed May  1 20:46:04 2013] Not generating rmf since there are only 11 counts
[Wed May  1 20:46:04 2013] arf not found, will run specextract
[Wed May  1 20:46:12 2013] ../../acisf11549/products/spectra/fullrun_ccd7_acisf11549_pi14-548_pass1_cl_src13.warf not found
[Wed May  1 20:46:12 2013] ../../acisf11549/products/spectra/fullrun_ccd7_acisf11549_pi14-548_pass1_cl_src13.wrmf not found
[Wed May  1 20:46:12 2013] Removal of ../../acisf11549/products/spectra/fullrun_ccd7_acisf11549_pi14-548_pass1_cl_src13.soff failed
[Wed May  1 20:47:48 2013] Spectrum 13 has only 11 counts, deleting rmf
[Wed May  1 20:47:48 2013] 212.053
[Wed May  1 20:47:50 2013] Updating aperture counts using extracted products
[Wed May  1 20:47:50 2013] Total counts from fullrun_ccd7_acisf11549_pi14-548_pass1_cl_src13_src.pi.gz = 11.00
[Wed May  1 20:47:50 2013] Total counts from fullrun_ccd7_acisf11549_pi14-548_pass1_cl_src13_bgd.pi.gz = 2.00
[Wed May  1 20:47:50 2013] Got source and background scale factors 0.000001, 0.000007
[Wed May  1 20:47:50 2013] User source parameters:
  Position = (661.4, 1155.0) = 10 4 46.41 41 14 47.6
  Extent = 0.4 (0.4-0.7)", rotation angle = 0
  Source aperture counts = 10.8 +/- 4.4
  Background aperture counts = 0.2
  Rate = 0.002 +/- 0.0007

[Wed May  1 20:47:51 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  1 20:47:51 2013] Using photon index=1.80, rate=0.00192, arf fullrun_ccd7_acisf11549_pi14-548_pass1_cl_src13.arf
[Wed May  1 20:47:51 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May  1 20:47:51 2013] Updating source flux to 1.7e-14
[Wed May  1 20:47:55 2013] Source 13 has fewer than 100.000000 counts, skipping spectral fitting