[Sun Oct  2 08:03:04 2011] Detection parameters:
  Position = (479.7, 884.4) = 10 4 33.83 41 12 34.8
  Extent = 0.5" x 0.5", rotation angle = 93 degrees
  Source counts = 76.1 +/- 8.8
  Background counts = 1.9
  Rate = 0.01 +/- 0.001

[Sun Oct  2 08:03:04 2011] Off-axis axis estimate = 0.46'
[Sun Oct  2 08:27:04 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Sun Oct  2 08:27:04 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Sun Oct  2 08:27:04 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.327
[Sun Oct  2 08:27:04 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.39"
[Sun Oct  2 08:36:17 2011] fullrun_ccd7_acisf11548_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct  2 08:36:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11548_pi14-548_cl_pass0_src1.csv
[Sun Oct  2 08:36:17 2011] fullrun_ccd7_acisf11548_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct  2 08:36:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11548_pi14-548_cl_pass0_src1.csv
[Sun Oct  2 08:36:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11548_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11548_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 08:36:17 2011] fullrun_ccd7_acisf11548_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct  2 08:36:17 2011] fullrun_ccd7_acisf11548_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct  2 08:36:17 2011] Fit fullrun_ccd7_acisf11548_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct  2 08:36:24 2011] Spatial fit model total counts = 79.898500, observed total counts = 82.000000
[Sun Oct  2 08:36:24 2011] Offset between fit and detection position for source 2 = 0.769028 pixels
[Sun Oct  2 08:36:24 2011] 79.291870 total counts/ 9.319570 bgd. counts: snr = 22.920718
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.769028 pixels
  Position = (480.1, 885.1) = 10 4 33.84 41 12 34.9
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 70.0 +/- 8.9
  Background counts = 9.3
  Rate = 0.01 +/- 0.001
[Sun Oct  2 08:36:24 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 08:36:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 08:36:24 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 08:36:24 2011] Source does appear to be extended
[Sun Oct  2 08:36:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 09:00:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct  2 09:00:30 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Sun Oct  2 09:00:30 2011] source mask rpix=0.8, npix_max = 7, mask sum = 4, frac = 0.559
[Sun Oct  2 09:00:30 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.41"
[Sun Oct  2 09:08:19 2011] fullrun_ccd7_acisf11548_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct  2 09:08:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11548_pi14-548_cl_pass1_src1.csv
[Sun Oct  2 09:08:19 2011] fullrun_ccd7_acisf11548_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct  2 09:08:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11548_pi14-548_cl_pass1_src1.csv
[Sun Oct  2 09:08:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11548_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11548_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 09:08:19 2011] fullrun_ccd7_acisf11548_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct  2 09:08:19 2011] fullrun_ccd7_acisf11548_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct  2 09:08:19 2011] Fit fullrun_ccd7_acisf11548_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct  2 09:08:25 2011] Spatial fit model total counts = 82.803800, observed total counts = 83.000000
[Sun Oct  2 09:08:25 2011] Offset between fit and detection position for source 2 = 0.001854 pixels
[Sun Oct  2 09:08:25 2011] 82.361600 total counts/ 11.087300 bgd. counts: snr = 21.405238
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.001854 pixels
  Position = (480.1, 885.1) = 10 4 33.84 41 12 34.9
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 71.3 +/- 9.1
  Background counts = 11.1
  Rate = 0.01 +/- 0.002
[Sun Oct  2 09:08:25 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 09:08:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 09:08:25 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 09:08:25 2011] Source does appear to be extended
[Sun Oct  2 09:08:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 09:17:46 2011] Writing source region out to fullrun_ccd7_acisf11548_pi14-548_pass1_cl_src2_src.reg
[Sun Oct  2 09:17:46 2011] Extracting stamp from image fullrun_ccd7_acisf11548_pi14-548_cl_sm2.00.img.gz, (461, 866) - (499, 904)
[Sun Oct  2 09:17:46 2011] Writing fullrun_ccd7_acisf11548_pi14-548_pass1_cl_src2.gif
[Sun Oct  2 09:17:50 2011] Size of ../../acisf11548/products/events/fullrun_ccd7_acisf11548_pi14-548_pass1_cl_src2_src.evt.gz[events] = 75 counts
[Sun Oct  2 09:17:50 2011] Mean chipx,y = (237.97, 524.08)
[Sun Oct  2 09:17:50 2011] Mean tdetx,y = (4154.97, 2226.08)
[Sun Oct  2 09:17:50 2011] chipx,y range = (221.00-255.00, 507.00-542.00)
[Sun Oct  2 09:17:50 2011] Size of ../../acisf11548/products/events/fullrun_ccd7_acisf11548_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 11 counts
[Sun Oct  2 09:17:52 2011] Not generating rmf since there are only 71 counts
[Sun Oct  2 09:17:52 2011] arf not found, will run specextract
[Sun Oct  2 09:18:02 2011] ../../acisf11548/products/spectra/fullrun_ccd7_acisf11548_pi14-548_pass1_cl_src2.warf not found
[Sun Oct  2 09:18:02 2011] ../../acisf11548/products/spectra/fullrun_ccd7_acisf11548_pi14-548_pass1_cl_src2.wrmf not found
[Sun Oct  2 09:18:02 2011] Removal of ../../acisf11548/products/spectra/fullrun_ccd7_acisf11548_pi14-548_pass1_cl_src2.soff failed
[Sun Oct  2 09:22:13 2011] Spectrum 2 has only 71 counts, deleting rmf
[Sun Oct  2 09:22:13 2011] 234.604
[Sun Oct  2 09:22:15 2011] Updating aperture counts using extracted products
[Sun Oct  2 09:22:15 2011] Error reading totcts from fullrun_ccd7_acisf11548_pi14-548_pass1_cl_src2_src.pi.gz
[Sun Oct  2 09:22:15 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct  2 09:22:15 2011] Using photon index=1.80, rate=0.012, arf fullrun_ccd7_acisf11548_pi14-548_pass1_cl_src2.arf
[Sun Oct  2 09:22:15 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct  2 09:22:15 2011] Updating source flux to 8.9e-14
[Sun Oct  2 09:22:19 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct  2 09:22:20 2011] acisf11548/analysis//spectral/fullrun_ccd7_acisf11548_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete