Source List

Observation details report
Detailed source parameters (including errors) in a comma-separated values file

Click on source number for detailed analysis, including spectral fits if applicable

data idnum idradec telescope instrument x y cnts cntserr rate rateerr SNR poisprob sigmaj sigmin incang offax cnts_soft cnts_hard hr hr_err ext var N_H flux vign flags
Report srcpi bgdpi arf rmf 2 X113151.58-123158.7 chandra ccd7 169.597 707.879 7890.77 93.5612 0.32049 0.00380006 364.169 1 0.826285 0.358249 80.9459 0.316708 5625.75 2345.56 -0.411499 0.0122524 A F 3.42e+20 2.63652e-12 1 dscxf
Report srcpi bgdpi arf rmf 1 X113151.51-123158.6 chandra ccd7 171.719 708.084 9496.14 97.8377 0.385693 0.00397376 438.259 1 1.36108 0.833611 350.73 0.312938 6487.92 2690.5 -0.413733 0.0114211 A F 3.42e+20 2.87698e-12 1 dscbx
Report srcpi bgdpi arf 1 X113232.86-124331.6 chandra ccd3 101.436 60.6292 47.1277 8.53326 0.00191413 0.000346585 15.8219 1 2.95469 2.19581 82.7597 15.557 29.2246 17.6582 -0.246707 0.186373 F F 3.51e+20 2.83226e-14 1 dx

counts and rate are bgd.-subtracted, based on simple spatial fitting (if done) or extracted counts from aperture otherwise (N.B., in either case aperture counts are given csv file).
cntserr, rateerr = Error on (source) counts and count rate, based on error in total counts
SNR = signal-to-noise ratio, computed using Nsrc/sqrt(Nbgd)
poisprob = Poisson probability of observing total counts given bgd. counts
sigmaj, sigmin = source extent (from detection output or spatial fitting) in units of arcsecs.
incang = position angle of source (inclination from x-axis)
cnts_soft = bgd.-subtracted counts in soft band (0.50 - 2.00 KeV, always taken directly from source aperture rather than model fitting)
cnts_hard = bgd.-subtracted counts in hard band (2.00 - 7.99 KeV, always taken directly from source aperture rather than model fitting)
hr, hr_err = hardness ratio ([cnts_hard-cnts_soft]/[cnts_hard+cnts_soft]) and error
ext = source extension flag: F = false (not extended), T = true (extended), A = asymetric (ratio of sigmaj/sigmin > 1 + x, where x = 0.5 by default)
var = variability flag: U = unknown, F = false (is not variable), T = true
N_H = Galactic column density as determined from LHEASOFT nh program
flux = flux determined from count rate using pimms (in the 0.30-8.00 keV bandpass for a power-law model with ph. index = 1.8)
vign = vignetting correction
Flags: d = detection parameters, s = simple spatial fitting parameters, b = simple spatial fitting failed, p = poor simple spatial fit, x = extracted events parameters, t = temporal anaylsis parameters, i = psf spatial fitting parameters, f = spectral fitting parameters, c = source is confused, u = user-defined source, v = detected source coincident with user-defined source, r = source is in region-of-interest